Advertisement
8/30/23, 12:15 PM
4) Check that "Bluetooth" is enabled.
If unavailable, tap to enable.
5) Slide the power switch/device selection switch to choose between connected
devices.
Please refer to
The selected connected Bluetooth device will be registered under your paired devices.
6) Hold down the pairing button at the bottom of the product for 3 seconds and
then release.
Pairing mode will be activated and the LED will blink.
https://www.elecom.co.jp/support/manual_web/products/type_01-multi/enus/m-sh20bb/
User Manual - Bluetooth®5.0 5 Button Mouse M-SH20BB Series | ELECOM Co., Ltd
"Switch connected device"
to switch between connected devices.
41/65
Advertisement
Need help?
Do you have a question about the M-SH20BB Series and is the answer not in the manual?