Advertisement
8/30/23, 12:15 PM
You will need to install the "ELECOM Mouse Assistant for Mac" from our website to
use the "Back" and "Forward" button on Mac. Please refer to
Assistant".
⑥ LED light
During pairing standby state, the LED blinks.
The LED will light up for a period of time when the mouse is switched ON.
The LED will blink during use when the battery level is low.
⑦ Battery cover
Remove this cover to replace the battery.
⑧ Optical sensor
The LED will light up blue when the power is on.
This sensor will detect mouse movements when you move the mouse.
* Please note that looking directly into the sensor light may hurt your eyes.
⑨ Pairing button
Pair the mouse with your deviceʼs Bluetooth module or a Bluetooth adapter.
⑩ Power switch/device selection switch
Turn the mouse on or off and switch between connected devices.
Please refer to
⑪ Battery storage compartment
Holds the battery.
⑫ Battery insulating tab
Remove this tab before using.
https://www.elecom.co.jp/support/manual_web/products/type_01-multi/enus/m-sh20bb/
User Manual - Bluetooth®5.0 5 Button Mouse M-SH20BB Series | ELECOM Co., Ltd
"Switch connected
device".
"Install ELECOM Mouse
7/65
Advertisement
