Advertisement
8/30/23, 12:15 PM
3) Slide the power switch/device selection switch to choose between connected
devices.
Please refer to
The selected connected Bluetooth device will be registered under your paired devices.
4) During the device search, hold down the pairing button on the underside for 3
seconds and then release.
Pairing mode will be activated and the LED will blink.
5) When "ELECOM shellpha" is detected under "Nearby Devices", click "Connect".
https://www.elecom.co.jp/support/manual_web/products/type_01-multi/enus/m-sh20bb/
User Manual - Bluetooth®5.0 5 Button Mouse M-SH20BB Series | ELECOM Co., Ltd
"Switch connected device"
to switch between connected devices.
24/65
Advertisement
