Table of Contents
Advertisement
OPERATION
CAUTION IMPORTANT! When installing this projector, make sure that it is mounted in a manner that
prevents the audience from looking directly into the beam, and the beam from striking the audience.
Operating Modes: The Micro Galaxian II has 2 operating modes; sound active mode and auto mode.
Sound Active Mode: This mode allows the unit to run to the beat of the music.
1. Press the Mode button until the red LED located on the front of unit turns off. You are in sound active mode
if the red LED on the front of the unit flashes at every beat or sound.
Auto Mode: There are two auto modes to choose from; slow auto mode or fast auto mode.
1. To run fast auto mode, press the Mode button until the red LED located on the front of unit starts to flash
quickly. This indicates fast auto mode.
2. To run slow auto mode, press the Mode button until the red LED located on the front of unit starts to flash
slowly. This indicates fast auto mode.
UC LASER IR CONTROL
The UC Laser IR infrared remote gives you control of various functions. To control the fixture you must aim
the remote at the front of the fixture and be no more than 30 feet away.
STAND BY - Pressing this button will blackout the fixture.
PATTERN - Press this button for random rotation.
PATTERN + - Press this button for clockwise rotation.
PATTERN - - Press this button for counter-clockwise rotation.
SPEED - Press this button for random rotation speed.
SPEED + - Press this button to speed up the rotation.
SPEED - - Press this button to slow down the rotation.
COLOR BUTTONS - Press the color buttons R, G, or R+G to select your desired color(s). Buttons B, G+B,
B+R, and R+G+B are invalid for this fixture.
STROBE - This button will activate the strobe effect. Press the button once and hold for strobing.
SOUND - Press this button to activate sound active mode
AUTO FAST - Press this button to activate fast auto mode.
AUTO SLOW - Press this button to activate slow auto mode.
CLEANING
Fixture Cleaning: Due to fog residue, smoke, and dust cleaning the internal and external lenses should be
carried out periodically to optimize light output.
1. Use normal glass cleaner and a soft cloth to wipe down the outside casing.
2. Clean the external optics with a microfiber cloth every 20 days.
3. Always be sure to dry all parts completely before plugging the unit back in.
Cleaning frequency depends on the environment in which the fixture operates (I.e. smoke, fog residue, dust,
dew). In heavy use we recommend cleaning on a monthly basis. Periodic cleaning will ensure longevity, and
crisp beam output.
A.D.J. Supply Europe B.V. – www.americandj.eu – Micro Galaxian II User Instructions Page 9
Advertisement
Table of Contents
