Table of Contents
Advertisement
7. OTHERS MENU
7.3
Display Setting Menu
The [Display Setting] menu sets various display-related items according to operator's
preference. To display the menu, open the main menu then select the [Others] and
[Display Setting] menus.
TX/RX Mode: Select how to transmit and receive in combination displays. [Alterna-
tive] executes TX and RX one display at a time. [Multi] simultaneously executes TX
and RX on each display. This item is inoperative (shown in gray) in the following cas-
es.
• [Sidelobe Sup.A] on the [Sidelobe Sup.] menu is set between -3 and -1.
• [Sidelobe Sup.B] on the [Sidelobe Sup.] menu is set to a value other than 0, and
[RX Beam Control] on the Beam Width menu is set to a value other than 0.
TX/RX Mode: Determines how display modes are chosen: MODE key or pull-down
menu.
Echo Disp Area: Selects the echo display mode for the horizontal and slant displays,
[Within Range] or [Full Screen].
H2/S Display: Selects the combination mode of horizontal and slant displays:
Landscape, Portrait, or Inset.
2nd Monitor Setting: When two monitors are connected, select the combination
mode for the sub-display; Landscape or Portrait. This function is available only when
[Dual Display] is selected at [2nd Monitor Setting] on [Others]-[Initial Setting] menu.
7-3
Advertisement
Table of Contents
