Table of Contents
Advertisement
6. HOW TO CUSTOMIZE THE SONAR
4. Select [Register] then push the left-click button.
The selected item is registered, and shown at the bottom of the menu. The order
of items in the [USER] menu can be changed by drag and drop.
Note: If 20 items are already registered to the user menu the following message
appears. Delete unnecessary items from the user menu and then repeat this pro-
cedure to register different item. Press the MENU/ESC key to close this message.
5. Long-press the MENU/ESC key to close all menus.
6.1.2
How to delete items from the user menu
To delete a menu item from the user menu which you do not require, do as follows.
1. Press the MENU/ESC key to open the main menu.
2. Select [ Shortcut Menu] then push the left-click button.
3. Select the item to delete then push the left-click button more than three seconds.
The message "Delete Registration Selected item will be removed from main
menu. Are you sure?" appears.
4. Select [Remove] then push the left-click button to delete.
5. Long-press the MENU/ESC key to close all menus.
6.2
Function Keys (1/F1-0/F10)
The function keys provide one-touch display of desired menu item or entire menu. The
default function key settings are as below. Not all menu items and menus may be pro-
grammed to the function keys. See the menu tree on page AP-1 to AP-5 for items
which may be programmed.
Function key
1/F1
2/F2
3/F3
4/F4
5/F5
6/F6
7/F7
8/F8
9/F9
0/F10
6-2
Default setting
Record Still Image
Recall Still Image
Event Mark 1
Event Mark 1
Fish Mark 1
Own Ship Pos Mark
Ship's Track
Dimmer
Stabilization
Net Course Mark
Function
Save the still image
Open the [Still Image] window
Erase event mark 1
Erase event mark 2
Erase fish mark 1
Erase own ship position mark
Erase approx 10% of the ship's track
Adjust panel dimmer
Activate or deactivate the stabilization
Enter or erase the net course mark
Advertisement
Table of Contents
