Appliance Door; Main Oven - Fitting And Removing The Glass Panels - Siemens NB535AB 0B Series Instruction Manual

Table of Contents

Advertisement

qAppliance door
W ith good care and cleaning, your appliance will retain
A p p l i a n c e d o o r
its appearance and remain fully functional for a long
time to come. This will tell you how to clean the

appliance door.

Main oven – Fitting and removing the glass
panels
To facilitate cleaning, you can remove the glass panels
from the appliance door.
Locking the appliance door
Open the appliance door fully.
1.
Open the two locking levers on the left and right
2.
(fig.
).
!
Close the appliance door as far as it goes (fig.
3.
Removing panels
Press the left- and right-hand sides of the cover
1.
(fig.
).
!
Remove the cover (fig.
2.
Lift out each panel (fig.
3.
carefully on a flat surface.
If necessary, you can remove the condensate trough
4.
for cleaning. To do this, open the appliance door
fully (fig.
).
$
Tilt the condensate trough up and remove it (fig.
5.
).
"
) and set them down
#
Clean the panels with glass cleaner and a soft cloth.
Wipe the condensate trough with a cloth and some hot
soapy water.
:
Warning
Risk of injury!
Scratched glass in the appliance door may develop
into a crack. Do not use a glass scraper, sharp or
abrasive cleaning aids or detergents.
).
"
The hinges on the appliance door move when
Risk of injury!
opening and closing the door, and you may be
trapped. Keep your hands away from the hinges.
Fitting panels
Open the appliance door fully and refit the
1.
condensate trough. To do this, insert the trough from
above and rotate it at the bottom (fig.
Close the appliance door fully.
2.
Slide each panel back in and make sure that it is
3.
sitting correctly at the bottom in the retainer (fig.
Push each panel in at the top (fig.
4.
).
%
Appliance door
en
).
!
).
"
).
#
23

Advertisement

Table of Contents
loading

Table of Contents