Childproof Lock; Activating And Deactivating; Basic Settings; List Of Basic Settings - Siemens NB535AB 0B Series Instruction Manual

Table of Contents

Advertisement

AChildproof lock
T he bottom oven has a childproof lock to prevent
C h i l d p r o o f l o c k
children from switching it on or changing settings by
accident.
Notes
You can go to the basic settings to specify whether
you want the option to set the childproof lock.
~ "Basic settings" on page 17
If a hob is connected, it will not be affected by the
childproof lock on the oven.
After a power cut, the childproof lock will no longer
be active.

Activating and deactivating

To activate the childproof lock for the main oven, the
function selector must be set to the "Off" position.
Press and hold the ' button for approx. four seconds.
The symbol for this function appears in the display. The
childproof lock is now active for the main oven.
If a timer duration V has been set, this continues
Note:
to count down. While the childproof lock is active, the
timer duration cannot be changed.
To deactivate the childproof lock, press and hold the
' button again for approx. four seconds until the
symbol goes out in the display.
QBasic settings
T here are various settings available to you in order to
B a s i c s e t t i n g s
help use your appliance effectively and simply. You can
change these settings as required.

List of basic settings

Depending on the features of your appliance, not all
basic settings will be available.
Basic setting
™‚ Display the time
™ƒ Audible signal duration
upon completion of a cook-
ing time or timer duration
™„ Button tone that sounds
when a button is touched
™... Cooling fan run-on time
™† Amount of time until a set-
ting is applied
™‡ Enable childproof lock acti-
vation
™ˆ Water hardness**
* Factory setting (factory settings may vary depending on the appli-
ance model)
** Not available for all appliance types.
--------

Changing the basic settings

The function selector must be set to the "Off" position.
Press and hold the v button for approx. 4 seconds.
1.
The first basic setting will appear on the display,
e.g. ™‚ ‚.
Use the A or @ button to change the setting if
2.
necessary.
Press the v button to confirm.
3.
The next basic setting will appear on the display.
Using the v button, continue going through all the
4.
basic settings as described above, changing the
settings if necessary using the A or @ button.
When you have finished, press and hold the
5.
v button again for approx. 4 seconds to confirm the
settings.
All basic settings have now been applied.
You can change the basic settings again at any time.

Childproof lock

Options
‹ = Hide the time
‚ = Display the time*
‚ = Approx. 10 seconds
ƒ = Approx. 30 seconds*
„ = Approx. 2 minutes
‹ = off
‚ = on*
‚ = Short
ƒ = Medium
„ = Long*
... = Extra long
‚ = Approx. 3 seconds*
ƒ = Approx. 6 seconds
„ = Approx. 10 seconds
‹ = No
‚ = Yes*
‹ = softened
‚ = soft (up to 1.3 mmol/l)
ƒ = medium (1.3 - 2.5 mmol/l)
„ = hard (2.5 - 3.8 mmol/l)
... = very hard* (above 3.8 mmol/
l)
en
17

Advertisement

Table of Contents
loading

Table of Contents