Table of Contents
Advertisement
Skew Adjustment
The LNB Skew has been set
at a factory default position
as per image below. This is
optimised for the
Optus D1 satellite and will
allow good signal strength
all over New Zealand.
Skew adjustment is only re-
quired when signal strength
is weak at the limit of given
satellites' reception area.
It involves adjusting the
angle of the LNB on the roof
mounted antenna unit once
you have found the signal.
Adjust until you find the
strongest signal.
Caution: Follow general
safety advice on page 12
when adjusting Antenna
Unit.
Dish Stowage
For easy handling the holdall has been designed to simply slide over
the dish assembly whilst system is mounted onto the tripod. Ensure
the elevation is set to 30 to 50°
Note:
This bag has not been designed to be used for an outside cover for
the system.
Care & Maintenance
The Precision has been designed to be maintenance and trouble free.
For optimum signal strength, keep the antenna clean from dirt, bugs
and other debris.
1. Always handle the Precision kit with care. Do not drop the antenna.
2. Never power wash your Precision Kit. Keep the system clean from
dirt, bugs, and other debris by hand washing with mild soap and
water.
!
DO NOT USE SOLVENTS TO CLEAN YOUR PRECISION SYSTEM.
Default LNB position.
9 o'clock
Approximately
8 o'clock
12 o'clock
6 o'clock
3'o clock
9
Advertisement
Table of Contents
