Set Time; Placing A Call; Answering A Call; Out Of Range - Sanyo CLT-D6220 Instruction Manual

BASIC OPERATION (Continued)
Before using the phone (continued)

Set time

The handset has a date, time display. You may set the date and time before using the phone.
Press To
enter MENU
MENU
scroll to SETUP
enter SETUP
MENU
scroll to SET TIME
enter SET TIME (the year will flash)
MENU
select year (or direct input the number using numeric keys)
confirm year (the month will flash)
MENU
select month (or direct input the number using numeric keys)
confirm month (the day will flash)
MENU
select day (or direct input the number using numeric keys)
confirm day (the hour will flash)
MENU select hour (or direct input the number using numeric keys)
confirm hour (the minute will flash)
select minute (or direct input the number using numeric keys)
MENU
if time format is 12-hour, press to change AM/PM
confirm
exit
MENU
NOTE: You will need to set the date and time again after out of battery power or replacing the batteries.
If you have subscribed to Caller ID service, the date and time will be updated automatically when
received a call. However, it will not update the year.

Placing a call

1. Press or .
(if the handset is on the base cradle, lift the handset from the base and then press
The dialing buttons will light. Length of time depends on the setting in the menu.
CHARGE
/IN USE
The indicator in the base station will light.
2.
After you get the dial tone, dial the number.
The number you dialed will be shown in the display.
3. Press or place the handset back on the base station to hang up.
Or
You may pre-dial the number before you press
1. Dial the number.
The number you dialed will be shown in the display.
2. Press or
3.
Press or place the handset back on the base station to hang up.
NOTE: If the handset is too far away from the base station, pressing
an error beep sounds. In this case, move closer to the base station and press
13
or ).
1 3
2
ABC DEF
4 5 6
GHI JKL MNO
7 8 9
PQRS TUV WXYZ
0
TONE
or
may not place the call and
again.
BASIC OPERATION (Continued)

Answering a call

When a call comes in, the Incoming Ring LED, the
handset will light.
1. Press or .
(If the handset is on the base cradle, lift the handset from the base station and then press
or .
If the AUTO TALK is set to ON, simply lift the handset from the base to answer an incoming call.
2. Press
or place the handset back on the base station to hang up.
NOTE:
If the handset is too far away from the base station, pressing
an error beep sounds. In this case, move closer to the base station and press

Out of range

If you are too far away from the base and the call is cut, move closer to the base. Press
to search for the base. If successful you will hear a dial tone. Press

MENU CHART

Settings in the menu
You may set the following parameters using the display menu by pressing the
1. PHONEBOOK ADD
EDIT
DELETE
DELETE ALL
MUSIC GROUP
SPEED DIAL
MEMORY STATUS
2.
SETUP UNIT NAME
BACKLIGHT TIME
AREA CODE
DIAL MODE
AUTO TALK
14
CHARGE
/IN USE indicator will flash. Dial buttons on
may not end the call and
again.
to return to standby mode.
button:
MENU
INPUT NAME
DEFAULT
VIP
FAMILY
FRIEND
COLLEAGUE
SELECT KEY
SECOND 5 - 20
TONE
PULSE
ON
OFF