GE AIR 116 Service Manual & Installation Manual page 21

Operation procedures/pictures
Disassemble evaporator
8.1.6
The clamp plate can be removed by just pulling
away the movable latches in a direction as
shown by arrow. Screw off screws at the left
and the right of the evaporator and take out the
evaporator with hand, so that the side board latch
of the evaporator is disengaged from thegroove.
Remove the evaporator carefully and take care
to protect the connection pipe.
As shown in Fig.8-7, 8-8, 8-9
All manuals and user guides at all-guides.com
18
Movable latches
Rear pipe clamp plate
Screw
Screw
Fig.8-7
Fig.8-8
Fig.8-9