Table of Contents
Advertisement
Operation procedures/pictures
8.1.4
Disassemble water tray
To take the movable latch of water tray and the
wire terminal that connect withelectric box, then
lift up the water tray,take out the swing motor
wire, can dis-assemble the water tray.
As show in Fig.8-4
8.1.5
Disassemble electric box
Remove the grounding wire of the evaporator,
and remove the temperature sensor for the pipe.
Remove the socket/plug connector for the in-
door motor and swing motor of the electric box.
Screw off the screws fixing the electric box with
a screw driver. Remove the electric box.
As shown in Fig.8-5, 8-6
All manuals and user guides at all-guides.com
Tube sensor
Room sensor
17
Water tray
Movable latch
Fig.8-4
Screw
Fig.8-5
Hook
Screw
Fig.8-6
Motor wire
Advertisement
Table of Contents
