Download Print this page

Accessories - Sanyo MAR-B1021 Operating Instructions Manual

Am/fm stereo radio with auto-reverse cassette player

Advertisement

Please retain the carton and packing materials, as this is the best protection for the
unit should it be necessary to return it for servicing.
Check the packing carefully for the following accessories:
(1) 2 x Screw 5x14mm (used to fix the mounting bracket to the eye/support bracket).
(2) 1 x Hexagon Nut (used for fixing the mounting bracket to the eye/support bracket).
(3) 1 x Metal Bracket
(4) 1 x Front Panel
(5) 2 x VOL/TUN Knob
(6) 2 x Outer Knob
(1)
Screw
(4)
Front Panel
(7)
Rubber Boots
CAUTION
• This unit is designed to operate on 12 volts DC, negative ground electrical systems
only.
• When fuse replacement is necessary, use only a 5 amp fuse. Do not replace with
a higher rated fuse. If the fuse blows often, carefully check all electrical connections
for any short circuits and have your car's voltage regulator checked also.
• Do not install the unit where it will be exposed to direct sunlight or hot air discharged
from the car heater.
• Do not expose the unit to water or moisture.
• This AM/FM Radio with Cassette should not be adjusted or repaired by anyone
except qualified service personnel. If servicing is required, return the unit to an
authorized SANYO mobile audio dealer.
• Changes or modifications not expressly approved by SANYO may void the user's
authority to operate this equipment.
• This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.

ACCESSORIES

(7) 2 x Rubber Boots
(8) 4 x Nuts
(9) 4 x Washer
(2)
Hexagon Nut
(5)
VOL/TUN Knob
(8)
Nut
1
(3)
Metal Bracket
(6)
Outer Knob
9)
Washer

Hide quick links:

Advertisement

loading