Axis P1465-LE-3 User Manual page 22

AXIS P1465-LE-3 License Plate Verifier Kit
Additional settings
Use virtual ports to trigger actions
Virtual ports can be used together with access control to trigger any kind of action. This example explains how to set up
AXIS License Plate Verifier together with the camera's I/O port to display a text overlay using a virtual port.
Requirements:
• Camera physically installed and connected to the network.
• AXIS License Plate Verifier up and running on the camera.
• Cables connected between the barrier and the camera's I/O port.
• Basic setup done. See .
1. Go to the application's webpage and select the Settings tab.
2. Go to Access control.
3. Under Access control , select the Type drop-down list, select Internal I/O.
4. Select the I/O output #.
5. Select a port in the Virtual port drop-down list.
6. In the Barrier mode drop-down list, select Open to all.
7. In the Vehicle direction drop-down list, select any.
8. In the ROI drop-down-list, select the area of interest you would like to use, or if you would like to use all.
9. In the camera's webpage, go to System > Events.
10. Click Add rule.
11. Under Condition select Virtual input is active and the port number you have selected.
12. Under Action, select Use overlay text.
13. Select Video channels.
14. Type the text you want displayed.
15. Add the duration of the text.
16. Click Save.
17. Go to Video > Overlays.
18. Go to Overlays.
19. Select Text in the drop-down menu and click +.
20. Type #D or select the modifier in the Modifiers drop-down list.
21. Check that the text overlay is displayed when a vehicle enters the region of interest in the live view.
22