Axis P1465-LE-3 User Manual page 41

AXIS P1465-LE-3 License Plate Verifier Kit
The device interface
WDR : Turn on to make both bright and dark areas of the image visible.
Local contrast
dark and light areas.
Tone mapping
zero only the standard gamma correction is applied, while a higher value increases the visibility of the darkest and brightest
parts in the image.
White balance
When the camera detects the color temperature of the incoming light, it can adjust the image to make the colors look more
natural. If this is not sufficient, you can select a suitable light source from the list.
The automatic white balance setting reduces the risk of color flicker by adapting to changes gradually. If the lighting changes, or
when the camera is first started, it can take up to 30 seconds to adapt to the new light source. If there is more than one type
of light source in a scene, that is they differ in color temperature, the dominating light source acts as a reference for the
automatic white balance algorithm. This behavior can be overridden by choosing a fixed white balance setting that matches
the light source you want to use as a reference.
Light environment:
• Automatic: Automatic identification and compensation for the light source color. This is the recommended setting
which can be used in most situations.
• Automatic – outdoors
recommended setting which can be used in most outdoor situations.
• Custom – indoors
and good for a normal color temperature around 2800 K.
• Custom – outdoors
5500 K.
• Fixed – fluorescent 1: Fixed color adjustment for fluorescent lighting with a color temperature around 4000 K.
• Fixed – fluorescent 2: Fixed color adjustment for fluorescent lighting with a color temperature around 3000 K.
• Fixed – indoors: Fixed color adjustment for a room with some artificial light other than fluorescent lighting and
good for a normal color temperature around 2800 K.
• Fixed – outdoors 1: Fixed color adjustment for sunny weather conditions with a color temperature around 5500 K.
• Fixed – outdoors 2: Fixed color adjustment for cloudy weather condition with a color temperature around 6500 K.
• Street light – mercury
in street lighting.
• Street light – sodium
lights common in street lighting.
• Hold current: Keep the current settings and do not compensate for light changes.
• Manual
the camera to interpret as white in the live view image. Use the Red balance and Blue balance sliders to adjust the
white balance manually.
Day-night mode
: Use the slider to adjust the contrast of the image. A higher value makes the contrast higher between
: Use the slider to adjust the amount of tone mapping that is applied to the image. If the value is set to
: Automatic identification and compensation for the light source color. This is the
: Fixed color adjustment for a room with some artificial light other than fluorescent lighting
: Fixed color adjustment for sunny weather conditions with a color temperature around
: Fixed color adjustment for ultraviolet emission in mercury vapor lights common
: Fixed color adjustment that compensates for the yellow orange color of sodium vapor
: Fix the white balance with the help of a white object. Drag the circle to an object that you want
41