Axis P1465-LE-3 User Manual page 10

AXIS P1465-LE-3 License Plate Verifier Kit
Basic setup
This example use case explains how to store events of allowlisted license plate numbers for 30 days.
Requirements:
• Camera physically installed and connected to the network.
• AXIS License Plate Verifier up and running on the camera.
• Internal storage or an SD card installed in the camera.
1. Go to Settings > Events.
2. Under Save events, select Allowlisted.
3. Under Delete events after, select 30 days.
Note
To detect an inserted SD card when the app is running, you need to restart the app. If an SD card is installed in the camera,
the app will automatically choose the SD card as the default storage.
AXIS License Plate Verifier uses the cameras internal memory to save up to 1,000 events, using license plate crops as the
frame. If you use larger frames, it will vary the amount of events you can save.
To change the image capture settings, go to Settings > Image. An SD card can save up to 100,000 events using any
type of frame.
10