Axis P1465-LE-3 User Manual page 26

AXIS P1465-LE-3 License Plate Verifier Kit
Vehicle access control scenario
Vehicle access control scenario
In the scenario for vehicle access control, the application can be connected to an Axis network door controller to configure access
rules, create schedules for access times, and handle vehicle access not only for employees, but also, for example, visitors and suppliers.
For backup, use an access system involving a door controller and card reader. To set up the door controller and the card reader, see
the user documentation at axis.com
1
Axis camera with AXIS License Plate Verifier
2
IP communication
3 Axis network door controller with card reader
4
I/O communication
5
Barrier
6
Optional third-party software
Connect to a door controller
In this example we connect the camera to a network door controller which means the camera works as a sensor. The camera forwards
the information to the controller which in turn analyzes the information and triggers the events.
Note
When switching between the AXIS License Plate Verifier and AXIS Entry Manager, make sure to refresh the webpages to get
access to all parameters.
Requirements:
• Camera and door controller physically installed and connected to the network.
• AXIS License Plate Verifier up and running on the camera.
• Basic setup done. See Basic setup on page 4 .
26