Before Operation - Sanyo ICR-B150 Instruction Manual

BEFORE OPERATION

Turning the power on and off
Slide the POWER switch to the ON position to turn on the power.
The unit is now in stand-by mode.
Example:
Folder name
Current file number
To turn off the power, slide the POWER switch to the OFF position in the
stop mode.
Auto power off function
The power turns off automatically when 5 minutes have elapsed after en-
tering the stop mode.
Hold function
If the control switch or operating button is pressed while the POWER switch
is set to the OFF position, "POWER OFF" appears briefly on the display. It
prevents accidental playback or recording.
Earphone
Connect an earphone (8 ohms, cord length less than 2 meters (6 feet 6
inches), not supplied) to the EAR jack. (The speaker is automatically dis-
connected.)
Note:
Be sure to reduce the volume before connecting
or disconnecting the earphone.
External microphone
Connect an external microphone (not supplied) to the MIC jack. (The built-
in microphone is automatically disconnected.)
7
Author name
USER-01
BU 1/ 1
Total file number
NEW
ON
POWER
EAR
MIC