ENROLLING/TRANSCRIBING A DATA FILE
ViaVoice is not supplied and must be purchased separately.
1. Disconnect the USB cable.
2. Connect one end of the audio cable (supplied) to the EAR jack and the
other end to the LINE-IN jack on the PC.
3. Slide the POWER switch to the ON position.
4. Slide the operation switch to the STOP position.
5. Press the TIME/SET and INDEX/CANCEL buttons at the same time
until "ENROLL" appears on the display.
6. Operate the PC and start "ViaVoice". (Follow the instruction manual for
To cancel enrolling, press the INDEX/CANCEL button.