Bang & Olufsen Beoplay E8 3rd Gen - Headphones Manual

Bang & Olufsen App

Bang & Olufsen

Bang-Olufsen.com/APP
Use the Bang & Olufsen App for setup, product customization and music enhancing features.

Box Overview

The box contains the Beoplay E8 3rd Gen wireless earphones, a charging case, a USB-C charging cable, silicone tips in four sizes and Comply tips.

Comply Tip

Beoplay E8 3rd Gen contains Silicone tips and Comply tips with extra secure fit and a SweatGuard ^TM membrane that prevents humidity and wax from entering the sound port. Beoplay E8 3rd Gen is fitted with medium Silicone tips out of the box. When using the Comply ^TM foam tips, squeeze down the foam tip and roll the tip into a thin, round cylinder. Pull back and up on the ear into the canal.
Gently insert the entire tip into the ear. Hold the tip in place until it expands. See www.complyfoam.com for more information.

First time use

For first time use after unpacking, place the earphones in the charging case and remove them from the charging case to turn them on.

The earphones are ready for Bluetooth pairing when the status indicators flash blue. Turn on Bluetooth on your device and select Beoplay E8.

Bluetooth pairing

Alternatively, keep a distance of less than 20 cm between the left and right earphones, touch and hold both for 5 seconds to initiate Bluetooth pairing. The indicator starts flashing blue and a sound prompt is heard. Turn on Bluetooth on your device and select Beoplay E8.

To charge the earphones, place them in the charging case and close the lid. The indicator inside the charging case flashes orange when charging, and turns green when fully charged. Charging time is approximately 2 hours for 7 hours of playtime.

Charging

Earphones

A fully charged case provides 4 extra earphone charges when on-the-go. The charging case LED indicates the battery status of the charging case when it is opened without earphones in the case and when earphones are removed from the case. Green light indicates more than 1 charge is left; orange indicates less than 1 charge is left. Charge the case when light is red.

Charging case

Charge the case using the USB cable connected to a computer or wall charger. Charging time is approximately 2 hours.

Alternatively, charge the case using a wireless charging pad. Place the case on the charging surface and ensure both the charger and case are in the charging mode as indicated by their respective indicators. Charging time is approximately 2.5 hours.

Charging case indicator

When charging the case without the earphones, the indicator inside the charging case flashes orange, and turns green when fully charged.

When charging both the case and earphones, the indicator inside the charging case flashes orange. The indicator flashes green when earphones are fully charged. Once both are fully charged, the indicator turns solid green.

Turn on

Remove earphones from the charging case or tap the right earphone to turn it on. The product indicator turns white, a sound is heard, and the product is ready for use.

Insert earphones

Call/music operations

	Left		Right
Play/pause ()			x1
Next track ()			x2
Previous track ()	x2
Volume control ()	(-) touch&hold		(+) touch&hold
Transparency (/)	x1
Voice activation ()			x3
Incoming call ()	x1	or	x1
Reject call ()	hold 0:05	or	hold 0:05
End call ()	x2	or	x2

Playing music

Tap and hold the left or right earphone to adjust volume.

Tap the right earphone to pause or resume playback.

Double tap the left earphone to skip to the previous song and double tap the right earphone to skip to the next song during music playback.

Calling

For incoming calls, tap either one of the earphones to accept or hold for 5 seconds to reject. During a call, double tap either one of the earphones to terminate call or triple tap to transfer audio from Beoplay E8 3rd Gen to the connected device.

Transparency

Tap the left earphone to enable/disable Transparency.

Voice activation

Triple tap the right earphone for voice activation.

Register Online

Register online at www.bang-olufsen.com/register-product to receive important information about product and software updates – and to get exciting news and offers from the BANG & OLUFSEN Group. If you have purchased your product at a BANG & OLUFSEN store or at www.bangolufsen.com, you have automatically been registered