Table of Contents
Advertisement
Miscellaneous Settings (OPTION)
Setting the auto flip function
B
(AUTO FLIP)
Rotates the displayed image up or down, left or right
electronically when the camera tilts beyond the straight down
position.
OPTION
INFORMATION
AUTO FLIP
MIRROR
REFRESH
PRESET
MENU
1
Use the joystick lever (xy) to select [AUTO FLIP]
and use the lever (vw) to select "ON".
Available settings:
• OFF: Disables the Auto Flip function. (When the tilting
angle reaches 90 degrees, the camera stops.)
• ON: Enables the Auto Flip function, allowing you to
continue monitoring when the camera is tilted
beyond the straight down position.
0 degrees
Normal image
90 degrees
ON: Inverse image
Inverse image → Normal image
The image is rotated automatically to change inverse image to
normal image.
An image is rotated upside down electronically when the
tilting angle reaches around 90 degrees.
(When the Auto Flip takes place, the tilting motion
momentarily stops.)
☞
After completing setting, use the lever to move the cursor to
[MENU] and select "BACK" or "END".
SET
y
ON
OFF
SET
y
OFF
BACK
180 degrees
Normal image
Setting the mirroring function
C
(MIRROR)
Reverses the displayed image electronically. This function can
be used when the camera is installed upside down or when
performing surveillance through a mirror.
OPTION
INFORMATION
AUTO FLIP
MIRROR
REFRESH
PRESET
MENU
1
Use the joystick lever (xy) to select [MIRROR] and
use the lever (vw) to select a mirroring mode.
Available settings:
• OFF: Normal image
• HV:
Rotated horizontally and vertically.
• H:
Rotated horizontally.
• V:
Rotated vertically.
OFF
HV
Memo: The "HV" option can be used when the camera is installed on
the floor. In this option, the direction to which the joystick
lever is moved matches the direction to which the camera
pans and tilts.
☞
After completing setting, use the lever to move the cursor to
[MENU] and select "BACK" or "END".
SET
y
ON
OFF
SET
y
OFF
BACK
H
V
50
- Quick Links:
- Instruction Manual
Hide quick links:
Advertisement
Table of Contents
