ADDER ADDERView CCS-MV4228 User Manual page 17

OSD - Advanced Operation
To get here
1 On the console keyboard, enter the following in succession:
Left Ctrl then Left Ctrl then o (upper or lower case accepted)
2 Click the Advanced Operation menu item.
Reset to Factory Defaults
Removes all user entered configuration details. This operation cannot be
undone.
Note: To avoid accidental resets, press and hold (for roughly 4 seconds).
Reset Device
Effectively reboots the multi-viewer.
Note: To avoid accidental resets, press and hold (for roughly 4 seconds).
System Upgrade / 2x Video Upgrades
Initiate either System or Video FPGA firmware upgrades. The label will
blink whilst the upgrade is in progress. See page 20 for a description of
the upgrade procedure.
16