Table of Contents
Advertisement
OSD - USB Settings
To get here
1 On the console keyboard, enter the following in succession:
Left Ctrl then Left Ctrl then o
(upper or lower case accepted)
2 Click the USB Settings menu item.
Mouse Parking
Refers to hiding the mouse when the user moves to the other monitor.
CTRL Key
Allows you to choose which Ctrl button on the keyboard that will be
used as a hotkey.
Device Emulator Interfaces
Specifies the user interface peripheral capabilities that are communicated
to the host PC.
Note: Consumer Report is a type of keyboard. Some versions of Linux do not
support Absolute Mouse mode.
Note: Mac keyboards aren't supported, although the user may connect to a
Mac host PC.
Keyboard Hotkeys
Determines whether keyboard hotkeys can be used.
Keyboard Shortcuts
Reserved for future use.
Mouse Mode
Defines the behavior of the multi-viewer system. Absolute mode is
recommended for most users. Relative mode will disable mouse-based
switching; leaving the front panel or hotkeys as the available switching
methods.
Note: Ensure that whichever Mouse Mode is selected, the corresponding Device
Emulator setting is also enabled.
External API
Determines whether external API routines can be used.
Mouse Switching
Determines which of the extra buttons of specially-equipped mouse
devices can be used to switch channels.
14
Advertisement
Table of Contents
