Buzzer; Ram Disk Setting - Kyocera ECOSYS PA4500cx Operation Manual

System Menu > Device Common
Item
[Time Zone]
[Summer Time]

Buzzer

[Menu] key > [ ][ ] key > [Device Common] > [OK] key > [
Set options for buzzer sound during the machine operations.
Item
[Key Conf. Buzzer]
[Job Finish]
[Ready Buzzer]
[Warning]
[Keyboard Confirm]

RAM Disk Setting

[Menu] key > [ ][ ] key > [Device Common] > [OK] key > [
NOTE
Displayed when the optional SSD is installed.
Create a RAM disk and set its capacity.
You can print print data from the job box by creating a RAM disk.
Value
[RAM Disk Mode]:[Off], [On]
[RAM Disk Size]: Setting range varies depending on size of onboard memory and optional memory usage.
IMPORTANT
After changing the setting, restart the system or turn the machine OFF and then ON.
Set the time difference from GMT. Choose the nearest listed location
from the list.
➡
Setting Date and Time (page 44)
If you select a region that utilizes summer time, configure settings for
summer time.
➡
Setting Date and Time (page 44)
Emit a sound when the operation panel keys are selected.
Value: [Off], [On]
Emit a sound when a print job is normally completed.
Value: [Off], [On]
Emit a sound when the warm-up is completed.
Value: [Off], [On]
Emit a sound when errors occur.
Value: [Off], [On]
Emit a sound to confirm key presses with a sound.
Value: [Off], [On]
226
Description
][ ] key > [Buzzer] > [OK] key
Description
][ ] key > [RAM Disk Setting] > [OK] key