Kyocera ECOSYS PA4500cx Operation Manual page 237

System Menu > Device Common
[Power Off Rule]
Select whether or not the machine enters Power Off mode for the following function.
Select [On] to set the Power Off mode.
• Network
• USB Cable
• USB Host
• NIC
(Displayed when the optional Network Interface Kit is installed.)
Value: [Off], [On]
Even when any of the functions is set to [On], if [NIC] is set to [Off] the machine does not enter Power Off Mode.
Even when [Network] or [USB Cable] is set to [Off], if the machine does not communicate with the other devices,
the machine will enter Power Off Mode.
[Power Off Timer]
Select whether to turn off the power automatically after a period of inactivity.
Value: [1 hour], [2 hours], [3 hours], [4 hours], [5 hours], [6 hours], [9 hours], [12 hours], [1 day], [2 days], [3 days],
[4 days], [5 days], [6 days], [1 week]
[WeeklyTimer Set.]
Configure settings for switching the machine into Sleep mode and waking it automatically at a specified time for
each day of the week.
Item
[Weekly Timer]
[Schedule]
[Retry Settings]
[Retry Interval]
[Auto Err. Clear]
If an error occurs during processing, processing stops to wait for the next step to be taken by the user. In the Auto
Error Clear mode, automatically clear the error after a set amount of time elapses.
Select whether to use Weekly Timer.
Value: [Off], [On]
Specify the time for each day of the week at which the machine enters
Sleep mode and recovers.
Set the number of retry to switch the machine into Sleep mode.
Value: [On], [Off]
NOTE
• If [On] is selected, set the number of retries. The setting range is 0 to
10.
• If [Off] is selected, retry is performed until the machine enters Sleep
mode.
Set the retry interval.
Use [ ][ ] to enter a number.
Value: 10 to 60 seconds (in 10 second increments)
230
Description