Kyocera ECOSYS PA4500cx Operation Manual page 222

System Menu > Network
[IPP over TLS]
Item
[Off/On]
[AvailableNetwork]
[HTTP]
Item
[Off/On]
[AvailableNetwork]
[HTTPS]
Item
[Off/On]
[AvailableNetwork]
[LDAP]
Item
[Off/On]
Sets whether to receive documents using TLS-protected IPP. To use this,
select [On] in these settings, and select [On] for [TLS] in the [Security].
The default port number is 443.
The setting will be changed after restarting the device or network.
Value: [Off], [On], 1 to 32767 (Port Number)
NOTE
If the setting is [On], a TLS certificate is required. The factory certificate is
the certificate owned by the machine.
Set whether to enable this function for each network of Wi-Fi Direct,
Wi-Fi and wired.
Value: [Disable], [Enable]
Set whether to communicate using HTTP.
The setting will be changed after restarting the device or network.
Value: [Off], [On]
Set whether to enable this function for each network of Wi-Fi Direct,
Wi-Fi and wired.
Value: [Disable], [Enable]
Select whether to communicate using HTTPS.
The setting will be changed after restarting the device or network.
Value: [Off], [On]
Set whether to enable this function for each network of Wi-Fi Direct,
Wi-Fi and wired.
Value: [Disable], [Enable]
Select whether to use LDAP.
Value: [Off], [On]
215
Settings
*1
Description
Description
*1
Description