How To Install Your Canopy Housing - Fanimation SLINGER LP8147SLBN Manual

How to Wire Your Ceiling Fan (continued)
3. Connect wires using connectors as shown in
Figure 4.
Check to see that all connections are tight,
including ground, and that no bare wire is
visible at the wire connectors. Do not operate
fan until the blades are in place. Noise and
motor damage could result.
L
N
AC POWER
GRAY
YELLOW
RED
BLACK
BLUE
BROWN
4. After connections have been made, put the white and green leads to one side and the black leads
towards the other side, the connection should be turned upward and carefully push leads into the outlet box.
The wires should be spread apart with the grounded conductor and the equipment-grounding conductor on one
side of the outlet box and the ungrounded conductor on the other side. (Figure 5)
The blades must be installed first before programming
is performed.
WARNING
BLACK
WHITE
Receiver
BLK-ANT
GREEN / YELLOW
- Ground wire (2)
From Receiver
Listed
Outlet Box
GREEN-Ground Wire
WHITE From Hanger Bracket
GREEN-Ground Wire
From Hanger Ball
WARNING
CAUTION: INCORRECT WIRE CONNECTION
COULD DAMAGE THIS RECEIVER.
BLUE
BROWN
GROUND
HANGER
BRACKET
HANGER
BALL
Figure 4
Green Wire
from Supply
(Ground)
Green Wire
from Hanger
Bracket (Ground)
Green Wire
GREEN-
from Receiver (2)
Ground wire
(Ground)
From Ceiling
Green Wire
from Hanger
Ball (Ground)
Figure 5
11
RECEIVER HARDWARE USED:
WIRE
CONNECTORS
RED
GRAY
YELLOW
WHITE
BLACK
ANTENNA
White Wire
from Supply
White Wire
from Receiver
Receiver
x 8
DC MOTOR
BLUE
LIGHT KIT
Listed
Outlet Box
Household
Supply
Black Wire
from Supply
Black Wire
from Receiver