Cadel RIVERIDRO 16 T2 Installer Manual page 4

Fig. 2 - Remove the fastening brackets
Position the stove and connect it to the smoke duct. Adjust the 4 feet (J) to find the right level so that the smoke duct and pipe are coaxial.
If the stove needs to be connected to an exhaust pipe that goes through the back wall (to go into the flue), be extremely careful
not to force it.
Forcing the stove smoke exhaust or using it improperly to lift or position the stove will irreversibly compromise
its function.
Turning the feet clockwise lowers the stove. Turning the feet anticlockwise raises the stove (see below).
4
new RIVER IDRO T2 - TESIS Airtight T2 - MIRA T2 - MAYA idroT2
Fig. 1 - Remove the fastening brackets
Fig. 4 - Foot adjustment
Fig. 3 - Remove the fastening brackets