Cadel RIVERIDRO 16 T2 Installer Manual page 31

SETTING
ROOM TEMP.
EXTERNAL THERMOSTAT
SEASON
AUTO ECO
BOILER WATER TEMP. SETTING
Parameters to set
Hydraulic diagram
LEGEND
Disconnect any three-way valve and stove internal flow switch, if equipped with a DHW kit.
31
new RIVER IDRO T2 - TESIS Airtight T2 - MIRA T2 - MAYA idroT2
VALUES
Cannot be activated
ON (connect storage tank thermostat)
WINTER (summer cannot be activated)
ON (it may not be disabled)
80 °C (to be adjusted according to the temperature chosen for the storage tank)
SETTING
CONFIGURATION
Fig. 68 - Configuration 4
Fig. 68
1
Stove
2
Cold H2O manifold
3
Hot H2O manifold
4 3-way valve
5 Electronic board
6 Zone valve
7 Radiator
8 Storage tank
9 Thermostat
10
Release pump
11
Room thermostat
12
Expansion vessel
A
Room thermostat independent from the stove (to be connected to the zone valves, if necessary)
B Thermostat to be connected directly to the electronic board (see electrical system)
VALUES
4