AXIS Q36 Dome Camera Series
Configure your device
Configure your device
Basic settings
Set the capture mode
1. Go to Video > Installation > Capture mode.
2. Click Change.
3. Select a capture mode and click Save and restart.
See also Capture modes on page 53.
Set the power line frequency
1. Go to Video > Installation > Power line frequency.
2. Click Change.
3. Select a power line frequency and click Save and restart.
Set the orientation
1. Go to Video > Installation > Rotate.
2. Select 0 , 90, 180 or 270 degrees.
See also Monitor long and narrow areas on page 9 .
Set up the camera view
Important
Only use PTRZ during the installation phase.
Use the remote pan, tilt, roll, and zoom (PTRZ) functionality to complete the installation of your camera.
The camera scans its surroundings and generates an overview image. Use this image to select the part of the scene that you
want to monitor.
Note
During the scan, the camera determines if it's wall or ceiling mounted. This is important if you want to be able to click the
live view to pan and tilt.
1. Go to Video > Installation.
To watch this video, go to the web version of this document.
help.axis.com/?&piaId=77836§ion=set-up-the-camera-view
6