Safety Information - Fluke TiX660 User Manual

Safety Information

A Warning identifies conditions and procedures that are
dangerous to the user. A Caution identifies conditions
and procedures that can cause damage to the Product or
the equipment under test.
 Warning
To prevent eye damage and personal injury:
•
Do not look into the laser. Do not point
laser directly at persons or animals or
indirectly off reflective surfaces.
•
Do not open the Product. The laser beam
is dangerous to eyes. Have the Product
repaired only through an approved
technical site.
•
Do not locate the laser beam so that it is
at eye level when you install the
thermography system.
•
The Product is equipped with an LED
light to illuminate the image. Avoid any
direct eye contact and do not point the
LED light at people, animals, or reflective
surfaces.
Additional laser warning information is on the case of the
Product, see Figure 1-1.
Figure 1-1. Lens Cover Laser Warning
 Warning
To prevent possible electrical shock, fire, or
personal injury:
•
Carefully read all instructions.
•
Read all safety information before you
use the Product.
•
Do not alter the Product and use only as
specified or the protection supplied by
the Product can be compromised.
1
Before You Start
Safety Information
hvh300.eps
1-3