Electrolux COC827X User Manual page 57

Step 1
Pour: 250 ml of white vinegar into
the cavity embossment. Use maxi‐
mum 6% vinegar without any addi‐
tives.
For the function: SteamBake clean the oven for every 5 - 10 cooking cycles.
12.3 How to remove: Shelf
supports / catalytic panels
Remove the shelf supports / catalytic panels
to clean the oven.
Step 1 Turn off the oven and wait until it is
cold.
Step 2 Pull the front of the shelf support
away from the side wall. Hold the rear
of the shelf support and catalytic pan‐
el in place. The catalytic panels are
not attached to the oven walls. They
can fall out when you remove the
shelf supports.
Step 3 Pull the rear end of the shelf support
away from the side wall and remove
it.
Step 4 Install the shelf supports in the oppo‐
site sequence.
12.4 How to use: Catalytic cleaning
There are catalytic panels in the cavity.
Catalytic panels absorb fat during catalysis.
Before the catalytic cleaning remove all accessories.
Step 1
Select Menu / Cleaning
press three times.
Duration: 1 h.The catalytic enamel is self cleaning, do not clean it with a cloth.
Step 2
Let the vinegar dissolve the lime‐
stone residue at the ambient tem‐
perature for 30 minutes.
Clean the oven with catalytic cleaning
Step 2
and When the cleaning ends the signal
sounds. The oven turns off.
Clean the cavity with warm water
and a soft cloth.
1
Spots or discolouration of the catalytic
coating have no effect on the cleaning.
When the oven is cold, clean the
Step 3
2
Step 3
cavity with a wet soft cloth.
ENGLISH 57