Startup / Operation - BOMANN 734510 Instruction Manual

• Transfer and attach the lower door hinge to the
opposite side of the appliance; after unscrewing
the hinge pin and relocating it to the adjacent
hole. Screw in the feet accordingly.
• Place the appliance back in the upright position.
Put on the appliance door and fix it in the intend-
ed position.
• Attach the door hinge* included in the scope of
delivery to the opposite side of the appliance.
• Put on the supplied hinge cover* and blind cap*.
• Disassemble the door handle and install it on the
corresponding other outside of the door. Observe
the instructions under
dle"
. Move the cover caps to the exposed holes
on the corresponding other outside of the door.
• Check whether the door is optimally aligned verti-
cally and horizontally so that smooth opening and
closing of the door is ensured.
Check that the door is optimally aligned both vertical-
ly and horizontally to ensure smooth opening and
closing of the door.

Startup / Operation

Intended use
The appliance is intended for private/household use.
It is suitable for cooling perishable foods such as
milk, dairy products, meat, fish, eggs, margarine,
various spreads and fruit and vegetables that are not
sensitive to cold.
This cooling unit is not suitable for freezing food!
Prior to first use
CAUTION:
After transport, the appliance should be left standing
upright for four hours before connecting to the power
supply. Nonobservance could lead to malfunction of
the cooling system and causes an appliance break-
down.
"Assembling the door han-
Clean the appliance interior including all accessory
parts. Consider the instructions which we provide in
"Cleaning and maintenance".
the chapter
Starting the appliance
• Connect the appliance to the power supply.
• Set the operating conditions. See also the follow-
ing sections.
Operating overview
Cooling operation
Keep pressing the Power button for approx. 3 sec-
onds to switch the cooling operation on or off.
The corresponding symbol..
..goes out when switched on.
..lights up when switched off and the display shows
"- -".
Display mode °C / F°
Keep pressing the SetTemp. button for approx.
3 seconds to change the display mode from Celsius
to Fahrenheit and vice versa.
The display °C or °F lights up accordingly.
25
Alarm
- Warning light
Set Temp.
- Temperature setting
- Display mode °C / °F
SuperCool
- Super cooling function
Eco
- Energy saving function
- Key lock
Power
- Cooling operation