Technical Data; Disposal - BOMANN 734510 Instruction Manual

Problem / cause / action
Loud noise during operation
- Check that the appliance is level.
"Operating noise"
- See
Water on the appliance bottom
- Check the temperature setting.
Light does not work
- Check the power supply.
"Changing the light"
- See
NOTE:
If a problem persists after following the steps above,
contact your trader or an authorized technician.
Error codes
With some malfunctions, the display shows error
codes! Notes for the specialist!
Code Causes
E0 Environmental temperature sensor failure
E1 Chamber temperature sensor failure
E2 Refrigerator evaporator sensor failure
Ec Communication sending failure
Er Communication receiving failure
F2 Fan motor failure

Technical data

Climate class SN/N/ST/T: this appliance is intended
to be used at ambient temperature ranging from
10°C to 43°C.
Electrical connection............................................
Power voltage: .........................220-240 V~ / 50 Hz
Rated power: ...............................................90 W
Rated current: ..............................................0.6 A
Dimension H x W x D / weight................................
Appliance size: ....................172.0 x 59.5 x 59.0 cm
Net weight: ..................................approx. 51.8 kg
For more information about the product, scan the QR
code on the supplied energy label and/or visit the
.
.
official website of the product data bank:
https://eprel.ec.europa.eu
The right to make technical and design modifications
during continuous product development remains
reserved.
This appliance has been tested according to all rele-
vant current CE guidelines, such as electromagnetic
compatibility and low voltage directives, and has
been constructed in accordance with the latest safety
regulations.
Meaning of the "Dustbin" symbol
Protect our environment; do not dispose of electrical
equipment in the domestic waste.
Please return any electrical equipment that you will
no longer use to the collection points provided for
their disposal.
This helps avoid the potential effects of incorrect
disposal on the environment and human health.
This will contribute to the recycling and other forms of
reutilization of electrical and electronic equipment.
Information concerning where these can be disposed
of can be obtained from your local authority. Your
dealer and contractual partner is also obliged to take
back the old appliance free of charge.
WARNING:
Remove or disable any existing snap and bolt locks if
you take the unit out of operation or dispose it.
31

Disposal