Troubleshooting - BOMANN 734510 Instruction Manual

Notes for the authorized specialist!
Lamp data: DC12V, 1.5 W
This product contains a light source of energy effi-
ciency class F.
• Disconnect the appliance from the power supply!
• Carefully loosen the lamp cover and remove it
downwards.
• Remove the lamp from the holder, pull it out and
disconnect the plug connection.
• Replace the defective lamp and reassemble
properly in reverse order.
Replacing the door hinge
If the appliance door starts to stutter, crack or jam
when you open it, it is probably due to a worn or
damaged hinge.
It is recommended to replace all door hinges at the
same time, otherwise the next repair will soon be
beckoning.
• Remove the contents of the appliance and the
movable interior parts.
• Tilt the appliance backwards and block it in this
position to prevent the door from sliding out.
• Loosen the hinge cover as described under
versing the door opening"
upper door hinge.
"Re-
and disassemble the
• Turn out the stand and disassemble the lower
door hinge.
• The respective hinge assembly is carried out in
reverse order.
• Open and close the appliance door for a test run,
readjust the hinges if necessary. In any case,
make sure that the door fits tightly and accurately.
Replacing the door handle
A malfunction due to too active use, may cause
damage to the door handle.
• Loosen the screw covers.
• Unscrew the screws underneath and remove the
door handle.
• The door handle is mounted in the reverse se-
quence, see also

Troubleshooting

Before you contact an authorized specialist
Problem / cause / action
Appliance is not working properly or at all
- Check the power supply / temperature setting /
ambient temperature.
- Unblock the ventilation openings, install the ap-
pliance freely.
Loading is too warm
- Check the temperature setting / ambient temper-
ature.
- A large quantity of warm food has been stored in
the unit in the last 24 hours.
- The appliance door is not closed properly, check
the door seal.
30
"Assembling the door handle"
.