Unpacking the appliance
• Remove the appliance from its packaging.
• Remove all packaging material, such as foils, filler
and cardboard packaging.
Dispose of packaging materials that are no longer
required in accordance with the locally applicable
regulations.
• To prevent hazards, check the appliance for any
transport damage.
• In case of damage, do not put the appliance into
operation. Contact your distributor.
NOTE:
Production residue or dust may have collected on the
appliance. We recommend cleaning the appliance
"Cleaning and maintenance"
according to chapter
Appliance equipment
Appliance overview
1 Interior light
2 Control panel/display
3 Bottle rack
4 Glass shelves
Delivery scope
5x glass shelf, 1x bottle rack, 2x drawer, 4x door
rack, 1x egg tray, 1x door handle incl. mounting ma-
terial, 1x rubber supporting pad incl. screw, 1x hinge
with cover and 1x blind cap for reversing the door
opening
Conditions for the installation location
• Good ventilation is required around the appliance
to dissipate the heat properly and to guarantee ef-
ficient cooling operation at low power consump-
tion. Enough clearance is necessary.
Gap to the back approx. 50~70 mm, to the
-
side walls and above the device each approx.
min. 100 mm;
Place the appliance so that the appliance door
-
.
can open without being impeded.
• Only install at a location with an ambient tempera-
ture suitable for the climate class of the appliance.
The climate class can be found under
data"
and on the rating label located in the interior
or on the appliance rear.
22
5 Fresh food drawer
6 Fruit/vegetable
drawer
7 Door storage racks
Installation
"Technical