Installing The Wall Bracket - Becker Centronic SunWindControl SWC442-II Assembly And Operating Instructions Manual

3) Programming the light function
Follow the Assembly and Operating Instructions for the re-
ceiver.
a) Readying the light receiver for programming
Switch off the power supply to the receiver for 5 seconds, then switch it back
on.
The receiver is now in programming mode for 3 minutes.
b) Programming the light function
First press the light control button and, within 3 seconds, also press program-
ming button; holds two buttons down until the receiver confirms successful
programming.
The programming process is now complete.

Installing the wall bracket

Wall bracket
Wall bracket
mounting
plate
24 - en
Unlocking mechanism
• Before installation in the de-
sired installation position,
check that the transmitter and
receiver are functioning prop-
erly.
• Fix the bracket to the wall with
the two screws enclosed.