Operations - Bissell Pawsitively clean SPOTCLEAN PET PLUS User Manual

Assembly
WARNING
1
Slide the Flex Hose Clip
into opening on the front
of the machine. You will
hear a "snap" when it is
locked into place.
4
Snap the second tool
storage (select models)
into the back between the
Cord Wrap and Hose Grip
Bracket.
Filling the Clean Water/Solution Tank
1
Remove the tank by pulling
the top of the tank away
from the unit.
4
Add formula to the
indicated fill line on the tank.
NOTE: Follow the fill lines on your Clean Water/Solution Tank to add the correct amount of hot tap water (140° F / 60° C MAX) and portable
machine formula. Note: There are different directions on the tank for small and large messes. DO NOT BOIL OR MICROWAVE WATER.
Do not plug in your cleaner until you are familiar with all instructions and operating procedures.
2
Attach Cord Wrap by
snapping it into place on
the Dirty Water Tank side
of the machine.
5
Then wrap the Flex
Hose around the unit
and snap hose grip into
bracket.
2
Pull black tab to reveal
tank opening. The plug
rotates out of the way for
easy filling.
5
Replace the plug by
rotating into place and
pressing gently onto tank.
3
Snap the Hose Grip
Bracket into the back of
the machine on the Clean
Water/Solution Tank side.
6
Wrap the Power Cord
around the Cord Wrap.
3
Add water to the indicated
fill line on the Solution
Tank.
6
Replace tank by lining the
bottom with indentations
on machine. Push the top
of the tank into place until
you hear a "click".
www.pawsitivelycleanpet.com
5