Volvo V60 TWIN ENGINE 2019 Owner's Manual page 187

2. Press and hold the M button depressed.
The light indicator in the button illumi-
nates.
3. Within three seconds, press and hold the 1
or 2 button.
> When the position has been stored in
the selected memory button, an acous-
tic signal can be heard and the light
indicator in the M button extinguishes.
If none of the memory buttons is depressed
within three seconds then the M button extin-
guishes and no storing takes place.
The seat, the door mirrors or the head-up-dis-
play must be readjusted before a new memory
can be set.
NOTE
All driver profiles need to be set in
Profile mode in order for the stored posi-
tions to work.
Related information
Manual front seat (p. 182)
•
Power* front seat (p. 183)
•
Adjusting the power* front seat (p. 183)
•
Using a stored position for seat, door mir-
•
rors and head-up display* (p. 185)
Adjusting massage settings* in the front
•
seat (p. 187)
Adjusting* the length of the seat cushion
•
in the front seat (p. 188)
Massage settings* in the front seat
•
(p. 186)
Adjusting the side support* in the front
•
seat (p. 189)
Adjusting the lumbar support* in the front
•
seat (p. 190)
Adjusting the passenger seat from the
•
driver's seat* (p. 191)
Angling adjustment of the door mirrors
•
(p. 169)
Settings for head-up display* (p. 140)
•
Protect driver profile (p. 134)
•
Protect
SEATS AND STEERING WHEEL
Using a stored position for seat,
door mirrors and head-up display*
If the positions for the power* seat, the door
mirrors and the head-up display* have been
stored, they can be activated by using the
memory buttons.
Using a stored setting
A stored setting can be used with the front
door either open or closed:
Open front door
Depress one of the memory buttons 1 (
–
or 2 ( ) with a short press. Power seat,
door mirrors and head-up display move
and then stop at the positions stored in
the selected memory button.
* Option/accessory.
)
}}
185