Table of Contents
Advertisement
Attaching an Accessory to the Multi-Function Shoe
Regarding accessories that can be used in PHOTO mode, refer to
For details on how to attach and use accessories, refer to the instruction manual of the
accessory in use.
1.
Remove the multi-function shoe cover and slide the accessory's
connecting terminal into the multi-function shoe.
When attaching accessories, insert the accessory's mounting foot until
it clicks into place, then slide the mounting foot locking lever to secure
it.
Caution
Using accessories with screws may damage the multi-function
shoe.
Protecting the multi-function shoe:
• After removing accessories from the multi-function shoe,
reattach the shoe cap to protect the contacts from dust and
water.
• Blow off any foreign material on the multi-function shoe with a
commercially available blower or similar tool.
• Allow the multi-function shoe to dry before use if it gets wet.
749
System
Map.
Advertisement
Table of Contents
