Table of Contents
Advertisement
3.
Select an option to configure.
Automatic transfer
Select [Enable] for automatic image transfer to the FTP server
immediately after shooting. You can continue shooting still photos as
usual while images are being transferred.
Caution
Before shooting, make sure a card is in the camera. If you
shoot without recording images, they cannot be transferred.
Images cannot be erased during image transfer.
Note
During continuous shooting, images are transferred to the
FTP server in the order they are captured.
Captured images are also stored on the card.
In the case of any images for which transfer fails or is
interrupted, the camera attempts transfer again automatically
when the connection is recovered (
later to manually transfer all of these images at once (
Repeated automatic transfer is not attempted if network
settings (such as FTP server settings) are changed before
automatic FTP transfer begins.
546
). You can also try again
).
Advertisement
Table of Contents
