Page 1 Advanced User Guide...
Page 2: Introduction
Connecting Other Devices Use the included interface cable or a genuine Canon cable when connecting the camera to a computer or other device. When connecting an interface cable, also use the included cable protector (p.37).
Page 3: Item Check List
If you purchased a Lens Kit, check that the lenses are included. Be careful not to lose any of the above items. When you need Lens Instruction Manuals, download them from the Canon website (p.4). The Lens Instruction Manuals (PDF files) are for lenses sold individually.
Page 4: Instruction Manuals
Downloading the Advanced User Guide/Instruction Manuals The Advanced User Guide and instruction manuals for lenses and software (PDF files) can be downloaded from the Canon website to a computer or other device. Download site...
Page 5 The Advanced User Guide and instruction manuals for lenses and software (PDF files) can be downloaded to a smartphone or tablet using the QR code. www.canon.com/icpd A software application is required to read the QR code. Select your country or region of residence, then download the Advanced User Guide/Instruction Manuals.
Page 6: Quick Start Guide
Quick Start Guide Insert the battery (p.43) Upon purchase, charge the battery to start using (p.40). Insert the card (p.44) With the card’s label facing toward the back of the camera, insert it into the card slot. Attach the lens (p.50) Align the red mount index on the lens with the red mount index on...
Page 7 Quick Start Guide Set the shooting mode to [ A ] (p.123) Press the < W > button and turn the < 6 > dial to select [ A ], then press < 0 >. All the necessary camera settings will be set automatically.
Page 8: About This Manual
About This Manual Chapter Organization Chapters 2–7 correspond to the functions in camera menus. Icons in this Manual < W > : Indicates the Mode button. < 6 > : Indicates the Main dial. < 5 > : Indicates the Quick control dial. <...
Page 9 About This Manual Basic Assumptions for Operational Instructions, Sample Photos Before following any instructions, make sure the power switch is set to < 1 > and no controls are locked with the Multi-function lock (p.48, 60). It is assumed that all the menu settings and Custom Functions are set to their defaults.
Page 10: Compatible Cards
Compatible Cards The following cards can be used with the camera regardless of capacity. If the card is new or was previously formatted (initialized) by another camera or computer, format the card with this camera (p.373). SD/SDHC/SDXC memory cards * UHS-II and UHS-I cards supported. Cards that Can Record Movies When shooting movies, use a large-capacity card with good enough performances (fast enough writing and reading speeds) to handle the...
Page 11: Chapters
Chapters Introduction Preparation and Basic Operations Shooting Playback Set-up Wi-Fi (Wireless Communication) Functions Custom Functions / My Menu Reference...
Page 12: Table Of Contents
Contents Introduction Item Check List................3 Instruction Manuals ..............4 Quick Start Guide ..............6 About This Manual ..............8 Compatible Cards..............10 Chapters .................. 11 Index to Features ..............21 Safety Instructions ..............25 Handling Precautions .............. 28 Part Names ................31 Preparation and Basic Operations Charging the Battery ...............
Page 13 Contents d Touch-Screen Operation ............. 67 Q Quick Control ..............68 Shooting Shooting Still Photos Tab Menus: Still Photo Shooting ..........71 Index to Features: Still Photo Shooting ........74 Setting Image Quality .............. 75 Setting Up Dual Pixel RAW Shooting ........78 Setting Cropping/Aspect Ratio ..........
Page 14 Contents Card Reminder ..............118 Setting the Image Review Time..........118 Setting the Metering Timer ............ 119 Exposure Simulation ............. 120 Appending Dust Delete Data ..........121 A Fully Automatic Shooting (Scene Intelligent Auto) ... 123 A Full Auto Techniques (Scene Intelligent Auto) ....126 x Shooting with the Touch Shutter ........
Page 15 Movie Cropping ..............219 Movie Digital IS ..............220 Shooting HDR Movies ............222 a Shooting Time-lapse Movies ......... 224 Shooting Movies Set to Canon Log ........236 Menu Function Settings ............244 Tab Menus: AF (Still Photos) ..........256...
Page 16 Contents Tab Menus: AF (Movies)............259 Selecting the AF Operation ........... 262 Selecting the AF Method ............265 Setting the AF Point Size............276 Focusing on People’s Eyes ........... 277 Setting Continuous AF............278 Setting Touch & Drag AF ............279 MF: Focusing Manually ............
Page 17 Contents k Enjoying Movies .............. 324 k Playing Back Movies ............325 X Editing a Movie’s First and Last Scenes ......327 I Grabbing a Frame from 4K Movies or 4K Time-Lapse Movies ............329 Slide Show (Auto Playback) ..........331 Viewing Images on a Television ..........
Page 18 Contents Setting Power-Saving Features..........377 Adjusting the Screen Brightness ........... 378 Adjusting the Screen Color Tone ........... 379 Setting the Date, Time, and Time Zone ......... 380 Setting the Interface Language ..........383 Setting the Video System ............384 Setting the Touch Control Response ........385 Disabling Beeps for Camera Operations .......
Page 19 Contents Setting Copyright Information ..........420 Checking Other Information ..........422 Wi-Fi (Wireless Communication) Functions What You Can Do via Wi-Fi (Wireless Communication) Functions........424 Connecting to a Smartphone via Wi-Fi........427 Connecting to a Computer via Wi-Fi ........461 Connecting to a Printer via Wi-Fi...........
Page 20 Contents Wi-Fi/Bluetooth Status Display ..........537 Custom Functions / My Menu Tab Menus: Customization ............ 540 Custom Function Settings ............. 542 Customizing Operations ............555 Tab Menus: My Menu ............565 Registering My Menu ............566 Reference Software Overview ..............572 Importing Images to a Computer ...........
Page 21: Index To Features
Index to Features Power Viewfinder Charging the battery p.40 Dioptric adjustment p.54 Battery level p.49 Information display in viewfinder p.397 Checking battery information p.387 Viewfinder vertical display p.399 Household power outlet p.582 Viewfinder display format p.402 Eco mode p.376 Power saving p.377 Screen Cards...
Page 22 Index to Features Metering Shooting Metering mode p.152 Shooting mode p.70 HDR mode p.161 Drive Multiple exposures p.166 Drive mode p.144 Bulb timer p.159 Self-timer p.147 Depth-of-field preview p.137 Silent LV shooting p.150 Remote switch p.176 Silent shooting p.151 Remote control p.174 Maximum burst p.77...
Page 23 Editing a movie’s first HDR movie p.222 and last scenes p.327 Time-lapse movie p.224 Frame Grab (4K) p.329 Canon Log p.236 Slide show p.331 Sound recording p.202 Viewing images on Microphone p.203 a television p.333 Wind filter p.202...
Page 24 Index to Features Image Editing Wireless Features RAW image processing p.339 Connect to smartphones p.427 Resizing JPEGs p.345 Auto send images to Cropping JPEGs p.346 smartphones p.446 Image Transfer/Print Order Remote control Image transfer to a (EOS Utility) p.461 computer/FTP server p.348 Auto send images to Print order (DPOF)
Page 25: Safety Instructions
Safety Instructions Be sure to read these instructions in order to operate the product safely. Follow these instructions to prevent injury or harm to the operator of the product or others. WARNING: Denotes the risk of serious injury or death. Keep the product out of the reach of young children.
Page 26 Safety Instructions Observe the following instructions when using a battery charger or AC adapter. • Periodically remove any dust buildup from the power plug and power outlet using a dry cloth. • Do not plug in or unplug the product with wet hands. •...
Page 27 Safety Instructions CAUTION: Denotes the risk of injury. Do not fire the flash near the eyes. It may hurt the eyes. Strap is intended for use on the body only. Hanging the strap with any product attached on a hook or other object may damage the product. Also, do not shake the product or expose the product to strong impacts.
Page 28: Handling Precautions
If you accidentally drop the camera into water or are concerned that moisture (water), dirt, dust, or salt may have gotten inside it, promptly consult the nearest Canon Service Center. Never leave the camera near anything having a strong magnetic field such as a magnet or electric motor.
Page 29 If you have not used the camera for some time or if there is an important shoot such as a foreign trip coming up, have the camera checked by your nearest Canon Service Center or check the camera yourself and make sure it is working properly.
Page 30 Handling Precautions Screen, Viewfinder, and LCD Panel Although the screen and viewfinder are manufactured with very high precision technology with over 99.99% effective pixels, 0.01% or fewer of the pixels may be dead, and there may also be spots of black, red, or other colors.
Page 31: Part Names
Part Names (12) (13) (14) (15) (16) (17) (18) (19) (20) (21) (10) (22) (11) < W > button (11) Lens mount Movie shooting button (12) Flash sync contacts < 6 > Main dial (13) Hot shoe Multi-function button (14) RF lens mount index Shutter button (15) Speaker...
Page 32 Part Names (10) (15) (11) (16) (12) (17) (18) (13) (19) (14) Eyecup (11) Info button Viewfinder eyepiece (12) Access lamp Dioptric adjustment knob (13) < Q / 0 > Quick Control/Setting button Power switch (14) < M > Menu button Terminal cover (15) <...
Page 33 Part Names (10) (11) (12) (13) (14) (15) (16) (17) Contact cover (10) < S / u > AF point/Index/Magnify/ Reduce button Accessory positioning hole (11) Strap mount Screen (12) Card slot cover Tripod socket (13) Card slot < W >< X >< Y >< Z >: < V > cross keys (14) Battery compartment cover lock Serial number...
Page 34 Part Names LCD Panel Sample display Information displayed varies depending on camera status. For icon details, see page 617. Viewfinder Information Display Sample display Information displayed varies depending on camera status.
Page 35 Part Names Battery Charger LC-E6 Charger for Battery Pack LP-E6N/LP-E6 (p.40). (1) Battery pack slot (2) Charge lamp (3) Power plug Battery Charger LC-E6E Charger for Battery Pack LP-E6N/LP-E6 (p.40). (1) Charge lamp (2) Battery pack slot (3) Power cord (4) Power cord socket...
Page 36 Part Names Attaching the Strap Pass the end of the strap through the camera’s strap mount eyelet from the bottom. Then pass it through the strap’s buckle as shown in the illustration. Pull the strap to take up any slack and make sure the strap will not loosen from the buckle.
Page 37 Canon cable. When connecting the interface cable, also use the included cable protector. Using the cable protector helps prevent accidental disconnection and terminal damage. Using the Included Interface Cable and a Canon HDMI Cable (Sold Separately) (1) Cable protector (2) Clamp...
Page 38 Part Names Using an Optional Canon Interface Cable When using a genuine Canon interface cable (sold separately), run the cable through the clamp (5) as shown before attaching the clamp to the cable protector. The digital terminal may be damaged if the interface cable is connected without the cable protector.
Page 39: Preparation And Basic Operations
Preparation and Basic Operations This chapter describes preparatory steps before you start shooting and the basic camera operations.
Page 40: Charging The Battery
Charging the Battery Detach the protective cover provided with the battery. Fully insert the battery in the charger. Do the opposite to remove the battery. LC-E6 Recharge the battery. For LC-E6 As shown by the arrow, flip out the battery charger’s prongs and insert the prongs into a power outlet.
Page 41 Charging the Battery Charge Lamp Charge Level Color Display 0–49% Blinks once per second 50–74% Blinks twice per second Orange Blinks three times per 75% or higher second Fully charged Green Turned on It takes approx. 2 hr. and 30 min. to fully recharge a completely exhausted battery at room temperature (23°C / 73°F).
Page 42 Charging the Battery Upon purchase, the battery is not fully charged. Charge the battery before use. Recharge the battery on the day before or on the day it is to be used. Even during storage, a charged battery will gradually drain and lose its capacity.
Page 43: Inserting/Removing The Battery
Inserting/Removing the Battery Load a fully-charged Battery Pack LP-E6N (or LP-E6) into the camera. Insertion Slide the battery compartment cover lock and open the cover. Insert the battery. Insert the end with the electrical contacts. Insert the battery until it locks in place. Close the cover.
Page 44: Inserting And Removing The Card
Inserting and Removing the Card The captured images are recorded onto the card. Make sure the card’s write-protect switch (1) is set upward to enable writing and erasing. Insertion Slide the cover to open it. Insert the card. As shown by the illustration, face the card’s label side toward you and insert it until it clicks in place.
Page 45 Inserting and Removing the Card Removal Open the cover. Set the power switch to < 2 >. Check that the access lamp (1) is off, then open the cover. If [Saving...] is displayed on the screen, close the cover. Remove the card. Gently push in the card, then let it go to eject.
Page 46 Inserting and Removing the Card When the access lamp is lit or blinking, it indicates that images are being written to, read from, or erased from the card, or data is being transferred. Do not open the card slot cover during this time. Also, never do any of the following while the access lamp is lit or blinking.
Page 47: Using The Screen
Using the Screen You can change the direction and angle of the screen. Flip out the screen. Rotate the screen. 180° When the screen is swung out, you 90° can rotate it up, down, or over 180° to face the subject. The indicated angle is only 175°...
Page 48: Turning On The Power
Turning on the Power < 1 > Turns the camera on, accompanied by the sound of the shutter curtain opening. Also accompanied by the sound of the aperture opening, when an RF lens is attached. < 2 > Stops camera operation, accompanied by the sound of the shutter curtain closing.
Page 49 Turning on the Power z Battery Level Indicator When the power switch is set to < 1 >, the battery level will be indicated in one of six levels. A blinking battery icon indicates that the battery will soon be exhausted. Display Level (%) 100–70...
Page 50: Attaching And Detaching A Lens
Attaching and Detaching a Lens Attaching a Lens Remove the caps. Remove the rear lens cap and the body cap by turning them as shown by the arrows. Attach the lens. Align the red mount index on the lens with the red mount index on the camera and turn the lens as shown by the arrow until it clicks in place.
Page 51 Attaching and Detaching a Lens Detaching the Lens While pressing the lens release button, turn the lens as shown by the arrow. Turn the lens until it stops, then detach it. Attach the rear lens cap to the detached lens. Do not look at the sun directly through any lens.
Page 52: Attaching And Detaching Ef/Ef-S Lenses
Attaching and Detaching EF/EF-S Lenses All EF and EF-S lenses can be used by attaching the optional Mount Adapter EF-EOS R. The camera cannot be used with EF-M lenses. Attaching a Lens Remove the caps. Remove the rear lens cap and the body cap by turning them as shown by the arrows.
Page 53 Attaching and Detaching EF/EF-S Lenses Set the lens’s focus mode switch to <AF>. <AF> stands for autofocus. <MF> stands for manual focus. Autofocus will not operate. Remove the front lens cap. Detaching the Lens While pressing the lens release button, turn the adapter as shown by the arrow.
Page 54: Using The Viewfinder
Using the Viewfinder Look through the viewfinder to activate it. You can also restrict display to either the screen or viewfinder (p.403). Adjusting the Viewfinder Clarity Turn the dioptric adjustment knob. Turn the knob left or right to make the viewfinder display look sharp.
Page 55: Basic Operations
Basic Operations Holding the Camera Viewing the Screen as You Shoot As you shoot, you can tilt the screen to adjust it. For details, see page 47. Normal angle Low angle High angle Shooting Through the Viewfinder To obtain sharp images, hold the camera still to minimize camera shake.
Page 56 Basic Operations Shutter Button The shutter button has two steps. You can press the shutter button halfway. Then you can further press the shutter button completely. Pressing Halfway This activates autofocusing and the automatic exposure system that sets the shutter speed and aperture. The exposure setting (shutter speed and aperture) is displayed on the screen, in the viewfinder, or on the LCD panel for...
Page 57 Basic Operations < W > Mode Button You can set the shooting mode. Press the < W > button, turn the < 6 > dial, then select the shooting mode. To switch between shooting still photos and movies, press the < W > button and then the <...
Page 58 Basic Operations < 6 > Main Dial (1) After pressing a button, turn the < 6 > dial. Press a button such as < W > or , then turn the < 6 > dial. If you press the shutter button halfway, the camera will go back to shooting- ready state.
Page 59 Basic Operations < 5 > Quick Control Dial (1) After pressing a button, turn the < 5 > dial. Press a button such as < W > or , then turn the < 5 > dial. If you press the shutter button halfway, the camera will go back to shooting- ready state.
Page 60 Basic Operations < R > Multi-Function Lock Button By setting [ 5 6: Multi function lock] and pressing the < R > button, you can prevent settings from being changed by accidentally operating the Main dial, Quick control dial, M-Fn bar, or control ring or tapping the touch-screen panel.
Page 61 Basic Operations < m > M-Fn (Multi-Function) Bar M You can assign commonly used functions to swiping the < m > bar and tapping each end. By default, no function is assigned. After purchase or when no function is assigned, you can access a shortcut screen for the [ 8 4: Customize M-Fn bar] setting menu by tapping the left end on <...
Page 62 Basic Operations INFO Button Each press of the button changes the information shown. The following sample screens are for still photos.
Page 63: Menu Operations And Settings
Menu Operations and Settings < M > button < 0 > button button Quick control dial Screen Main dial < V > cross keys [ A ] Mode Menu Screen * In [ A ] mode, some tabs and menu items do not appear.
Page 64 Menu Operations and Settings Screen in [ t ], [ d ], [ s ], [ f ], [ a ], and [BULB] Modes (10) Main tabs 3 : Playback Secondary tabs 5 : Set-up Menu items 8 : Custom Functions z : Shooting 9 : My Menu 2 : Autofocus...
Page 65 Menu Operations and Settings Select an item. Turn the < 5 > dial to select an item, then press < 0 >. Select an option. Turn the < 5 > dial to select an option. The current setting is indicated in blue.
Page 66 Menu Operations and Settings Dimmed Menu Items Example: Highlight tone priority Dimmed menu items cannot be set. The menu item is dimmed if another function setting is overriding it. You can see the overriding function by selecting the dimmed menu item and pressing <...
Page 67: Touch-Screen Operation
d Touch-Screen Operation You can operate the camera by tapping or dragging on the screen (touch-screen panel) with your finger. Sample screen (Quick Control) Use your finger to tap on (touch briefly and then remove your finger from) the screen. For example, when you tap on [ Q ], the Quick Control screen appears.
Page 68: Q Quick Control
Q Quick Control You can directly select and set the settings displayed on the screen. This is called Quick Control. Press the < Q > button ( 7 ) Select a setting item. Press the < W > < X > keys to select an item.
Page 69: Shooting
Shooting This chapter describes shooting and introduces menu settings on the shooting ([ z ]) tab. A M icon to the right of a page title indicates that the function is available only in [ t ], [ d ], [ s ], [ f ], [ a ], or [BULB] mode.
Page 70: Shooting Still Photos
Shooting Still Photos [Shooting Mode] Settings for Still Photos To prepare for still photo shooting, press the < W > button, then press the button to access the [Shooting mode] screen at left. [ A ] : Scene Intelligent Auto (p.123) [ t ] : Flexible-priority AE (p.140) [ d ] : Program AE (p.132) [ s ] : Shutter-priority AE (p.134)
Page 71: Tab Menus: Still Photo Shooting
Tab Menus: Still Photo Shooting Shooting 1 p.75 p.78 p.80 p.118 p.118 Shooting 2 p.110 p.179 Shooting 3 p.155 p.85 p.104 p.109 p.119 p.120...
Page 72 Tab Menus: Still Photo Shooting Shooting 4 p.97 p.100 p.102 p.117 p.88, 92, 95 Shooting 5 p.107 p.105 p.121 p.130 p.166 p.161 Shooting 6 p.159 p.115 p.151 p.150 p.149...
Page 73 Tab Menus: Still Photo Shooting In [ A ] mode, the following screen is displayed. Shooting 1 p.75 p.78 p.118 p.118 p.130 p.192...
Page 74: Index To Features: Still Photo Shooting
Index to Features: Still Photo Shooting Exposure simulation p.120 Shooting Modes Dust Delete Data p.121 [ A ] mode p.123 Touch Shutter p.130 [ t ] mode p.140 Drive mode p.144 [ d ] mode p.132 Self-timer p.147 [ s ] mode p.134 Silent LV shooting p.150...
Page 75: Setting Image Quality
Setting Image Quality You can select the pixel count and the image quality. JPEG image quality options include 73 , 83 , 74 , 84 , 7a , 8a , and b . RAW image quality options include 1 and F . Select [ z 1: Image quality].
Page 76 Previous versions of DPP Ver.4.x cannot process RAW images taken with this camera. If a previous version of DPP Ver.4.x is installed on your computer, obtain and install the latest version of DPP from the Canon Web site to update it (p.572). (The previous version will be overwritten.) Note that DPP Ver.3.x or earlier cannot process RAW images taken with...
Page 77 Setting Image Quality Guidelines for Choosing Image Quality For guidelines on file sizes, number of possible shots, and maximum burst shots, see page 609. Maximum Burst for Continuous Shooting The approximate maximum burst is displayed at the upper left of the shooting screen and lower right of the viewfinder.
Page 78: Setting Up Dual Pixel Raw Shooting
Setting Up Dual Pixel RAW Shooting Shooting 1 or F images with this feature enabled produces special, Dual Pixel RAW images containing dual pixel information from the image sensor. This is called Dual Pixel RAW shooting. When processing these images in Digital Photo Professional software for EOS cameras, you can take advantage of the Dual Pixel data to fine-tune sharpness (using depth information), shift the camera viewpoint slightly, and reduce ghosting.
Page 79 Setting Up Dual Pixel RAW Shooting Take the picture. A RAW image containing Dual Pixel data (Dual Pixel RAW image) is captured. Startup takes longer when the power switch is set to < 1 > or the camera resumes operation from auto power off. Continuous shooting speed is slower when you shoot with Dual Pixel RAW (p.144).
Page 80: Setting Cropping/Aspect Ratio
Setting Cropping/Aspect Ratio N Normally with RF or EF lenses, images are captured at the sensor size of approx. 36.0 x 24.0 mm in full-frame shooting, but in cropped shooting, you can isolate and magnify the center of the image approx. 1.6x (APS-C size) as if using a telephoto lens, or you can set an aspect ratio to suit your shooting application before shooting.
Page 81 Setting Cropping/Aspect Ratio Setting examples Take the picture. Y set When [1.6x (crop)] is set or an EF-S lens is used, an image magnified approx. 1.6x is displayed. When [1:1 (aspect ratio)], [4:3 (aspect ratio)], or [16:9 (aspect ratio)] is set, the image within the black masked or outlined area is captured.
Page 82 Setting Cropping/Aspect Ratio Areas outside the cropped area are not recorded in RAW shooting when [1.6x (crop)] is set, or with EF-S lenses. [Shooting area] has no effect on display when [1.6x (crop)] is set, or with EF-S lenses. [ 8 5: Add cropping information] is only available when [Full-frame] is set.
Page 83: I : Setting The Iso Speed For Still Photos
i : Setting the ISO Speed for Still Photos N Set the ISO speed (image sensor’s sensitivity to light) to suit the ambient light level. In [ A ] mode, ISO speed is set automatically (p.608). Regarding the ISO speed during movie shooting, see page 614. Press the <...
Page 84 Setting the ISO Speed for Still Photos ISO Speed Guide Low ISO speeds reduce image noise but may increase the risk of camera/subject shake or reduce the area in focus (shallower depth of field), in some shooting conditions. High ISO speeds enable low-light shooting, a larger area in focus (deeper depth of field), and longer flash range but may increase image noise.
Page 85 Setting the ISO Speed for Still Photos Setting the Manually-Settable ISO Speed Range You can set the manually-settable ISO speed range (minimum and maximum limits). You can set the minimum limit within L (equivalent to ISO 50) to H1 (equivalent to ISO 51200), and the maximum limit within ISO 100 to H2 (equivalent to ISO 102400).
Page 86 Setting the ISO Speed for Still Photos Setting the ISO Speed Range for ISO Auto You can set the automatic ISO speed range for ISO Auto within ISO 100–40000. You can set the minimum limit within ISO 100–25600, and the maximum limit within ISO 200–40000. Select [Auto range].
Page 87 Setting the ISO Speed for Still Photos Setting the Minimum Shutter Speed for ISO Auto You can set the minimum shutter speed so that the shutter speed set automatically will not be too slow when ISO Auto is set. This is effective in [ d ] and [ f ] modes when shooting moving subjects with a wide-angle lens, or when using a telephoto lens.
Page 88: Selecting A Picture Style
Selecting a Picture Style N Just by selecting a preset Picture Style, you can obtain image characteristics effectively matching your photographic expression or the subject. In [ A ] mode, [ D ] (Auto) is set automatically. Select [ z 4: Picture Style]. Select a Picture Style.
Page 89 Selecting a Picture Style Picture Style Characteristics [ D ] Auto The color tone will be adjusted automatically to suit the scene. The colors will look vivid for blue skies, greenery and sunsets, particularly in nature, outdoor and sunset scenes. If the desired color tone is not obtained with [Auto], use another Picture Style.
Page 90 Selecting a Picture Style [ U ] Faithful Suited for processing the image with a computer. The color of a subject that is captured in sunlight at a color temperature of 5200K will be adjusted to match the subject’s colorimetrical color. For subdued images with modest brightness and color saturation.
Page 91 Selecting a Picture Style Symbols The Picture Style selection screen has icons for [Strength], [Fineness], or [Threshold] for [Sharpness] as well as [Contrast] and other settings. The numbers indicate the values for these settings specified for the respective Picture Style. Symbols Sharpness Strength...
Page 92: Customizing A Picture Style
Customizing a Picture Style N You can customize the Picture Styles. You can adjust Picture Style settings such as [Contrast] or [Sharpness] ([Strength], [Fineness], and [Threshold]). To see the resulting effects, take test shots. To customize [Monochrome], see page 94. Select [ z 4: Picture Style].
Page 93 Customizing a Picture Style Adjust the item. Adjust the effect level, then press < 0 >. Press the < M > button to save the adjusted setting and return to the Picture Style selection screen. Any settings you change from default values are displayed in blue.
Page 94 Customizing a Picture Style [ V ] Monochrome Adjustment Besides the effects described on the preceding page such as [Contrast], or [Strength], [Fineness] and [Threshold] for [Sharpness], you can also set [Filter effect] and [Toning effect]. [ k ] Filter effect With a filter effect applied to a monochrome image, you can make white clouds or green trees stand out...
Page 95: Registering A Picture Style
Registering a Picture Style N You can select a base Picture Style such as [Portrait] or [Landscape], adjust it as desired, and register it under [User Def. 1], [User Def. 2], or [User Def. 3]. Useful when creating several Picture Styles with different settings.
Page 96 Registering a Picture Style Select an item. Select an item (such as [Strength] in [Sharpness]), then press < 0 >. Adjust the item. Adjust the effect level, then press < 0 >. For details, see “Customizing a Picture Style” (p.92). Press the <...
Page 97: B : Setting The White Balance
B : Setting the White Balance N White balance (WB) is for making the white areas look white. Normally, the Auto [ Q ] (Ambience priority) or [ Q w] (White priority) setting will obtain the correct white balance. If natural-looking colors cannot be obtained with Auto, you can select the white balance to match the light source or set it manually by shooting a white object.
Page 98 Setting the White Balance (Approx.) Display Mode Color Temperature (K: Kelvin) Auto (Ambience priority, p.99) 3000–7000 Auto (White priority, p.99) Daylight 5200 Shade 7000 Cloudy, twilight, sunset 6000 Tungsten light 3200 White fluorescent light 4000 Flash use Automatically set* Custom (p.100) 2000–10000 Color temperature (p.101) 2500–10000...
Page 99 Setting the White Balance [ Q ] Auto White Balance With [ Q ] (Ambience priority), you can slightly increase the intensity of the image’s warm color cast when shooting a tungsten-light scene. If you select [ Q w] (White priority), you can reduce the intensity of the image’s warm color cast.
Page 100 Setting the White Balance [ O ] Custom White Balance With custom white balance, you can manually set the white balance for the specific light source of the shooting location. Make sure to perform this procedure under the light source at the actual location of the shoot. Shoot a white object.
Page 101 Setting the White Balance If the exposure obtained in step 1 differs greatly from the standard exposure, a correct white balance may not be obtained. The following images cannot be selected: Images captured with the Picture Style set to [Monochrome], multiple-exposure images, cropped images, and images shot with another camera.
Page 102: White Balance Correction
u White Balance Correction N You can correct the white balance that is set. This adjustment will have the same effect as using a commercially available color temperature conversion filter or color compensating filter. Each color can be corrected to one of nine levels. This function is for advanced users who understand the use of color temperature conversion and color compensating filters and their effects.
Page 103 White Balance Correction White Balance Auto Bracketing With just one shot, three images with different color tones can be recorded simultaneously. Based on the color temperature of the current white balance setting, the image will be bracketed with a blue/amber bias and magenta/green bias.
Page 104: Auto Correction Of Brightness And Contrast
Auto Correction of Brightness and Contrast N If the image comes out dark or the contrast is low, the brightness and contrast can be corrected automatically. This function is called Auto Lighting Optimizer. The default setting is [Standard]. In [ A ] mode, [Standard] is set automatically. Select [ z 3: Auto Lighting Optimizer].
Page 105: Setting Noise Reduction
Setting Noise Reduction N High ISO Speed Noise Reduction This function reduces the noise generated in the image. It is especially effective at high ISO speeds. When shooting at low ISO speeds, the noise in the darker parts of the image (shadow areas) can further be reduced.
Page 106 Setting Noise Reduction Cautions for Setting Multi Shot Noise Reduction If there is significant misalignment in the image due to camera shake, the noise reduction effect may become smaller. If you are handholding the camera, keep it steady to prevent camera shake.
Page 107 Setting Noise Reduction Long Exposure Noise Reduction For images exposed for 1 sec. or longer, noise (dots of light and banding) typical of long exposures can be reduced. Select [ z 5: Long exp. noise reduction]. Set a reduction option. Select an option, then press <...
Page 108 Setting Noise Reduction With [Auto] or [Enable] set, the noise reduction process after the picture is taken may take the same amount of time as that for the exposure. Images may look grainier with the [Enable] setting than with the [Disable] or [Auto] setting.
Page 109: Highlight Tone Priority
Highlight Tone Priority N You can reduce overexposed, clipped highlights. Select [ z 3: Highlight tone priority]. Set an option. [Enable]: Improves gradation in highlights. The dynamic range is expanded from the standard 18% gray to bright highlights. The gradation between the grays and highlights becomes smoother.
Page 110: Correction Of Lens Aberrations Due To Optical Characteristics
Correction of Lens Aberrations due to Optical Characteristics N Peripheral light fall-off is a phenomenon that makes the image corners look darker due to the optical characteristics of the lens. Image distortion due to optical characteristics of the lens is called distortion. Color fringing along subject outlines is called chromatic aberration.
Page 111 When you magnify images, distortion correction is not applied to the images displayed. Images with distortion correction applied will not have the Dust Delete Data (p.121) appended. For details on lenses you can use to shoot movies with distortion correction, visit the Canon website.
Page 112 Correction of Lens Aberrations due to Optical Characteristics Digital Lens Optimizer Depending on shooting conditions, noise may be intensified together with the effects of correction. Image edges may also be emphasized. Adjust Picture Style sharpness or set [Digital Lens Optimizer] to [Disable] as needed before shooting.
Page 113 Correction of Lens Aberrations due to Optical Characteristics Chromatic Aberration Correction [Chromatic aberr corr] is not displayed when [Digital Lens Optimizer] is enabled. Diffraction Correction Depending on shooting conditions, noise may be intensified together with the effects of correction. The higher the ISO speed, the lower the correction amount will be. For movie shooting, [Diffraction correction] will not appear.
Page 114 JPEG images already taken. When using a non-Canon lens, setting the corrections to [Disable] is recommended even if [Correction data available] is displayed. Magnifying the periphery of the image may display parts of the image that will not be recorded.
Page 115: Reducing Flicker
Reducing Flicker N If you shoot an image with a fast shutter speed under a light source such as fluorescent light, the blinking of the light source causes flicker and the image may be vertically unevenly exposed. If continuous shooting is used under these conditions, uneven exposures or colors across the images may result.
Page 116 Reducing Flicker In the [ t ], [ d ], or [ f ] mode, if the shutter speed changes during continuous shooting or if you shoot multiple shots of the same scene at different shutter speeds, the color tone may become inconsistent. To avoid inconsistent color tones, use [ t ], [ s ], or [ a ] mode at a fixed shutter speed.
Page 117: Setting The Color Space
Setting the Color Space N The range of reproducible colors is called “color space”. With this camera, you can set the color space for captured images to sRGB or Adobe RGB. For normal shooting, sRGB is recommended. In [ A ] mode, [sRGB] is set automatically. Select [ z 4: Color space].
Page 118: Card Reminder
Card Reminder You can set the camera not to shoot unless there is a card in the camera. The default setting is [Enable]. Select [ z 1: Release shutter without card]. Select [Disable]. Select [Disable], then press < 0 >. Setting the Image Review Time You can set how long the image is displayed on the screen immediately after shooting.
Page 119: Setting The Metering Timer
Setting the Metering Timer N You can set how long the metering timer runs (which determines the duration of exposure display/AE lock) after it is triggered by an action such as pressing the shutter button halfway. Select [ z 3: Metering timer]. Set a time option.
Page 120: Exposure Simulation
Exposure Simulation N Exposure simulation simulates and displays how the brightness (exposure) of the actual image will look. Select [ z 3: Expo. simulation]. Set an option. Select an option, then press < 0 >. Enable ( g ) The displayed image brightness will be close to the actual brightness (exposure) of the resulting image.
Page 121: Appending Dust Delete Data
Appending Dust Delete Data N Normally, the Self Cleaning Sensor Unit will eliminate most of the dust that may be visible on captured images. However, for the case where visible dust still remains, you can append the Dust Delete Data to the image for erasing the dust spots later.
Page 122 Appending Dust Delete Data Shoot a solid-white object. At a distance of 20–30 cm (0.7–1.0 ft.), fill the screen with a patternless, solid- white object and take a picture. Since the image will not be saved, the data can still be obtained even if there is no card in the camera.
Page 123: A Fully Automatic Shooting (Scene Intelligent Auto)
A Fully Automatic Shooting (Scene Intelligent Auto) [ A ] is a fully automatic mode. The camera analyzes the scene and sets the optimum settings automatically. It can also adjust focus automatically on either the still or moving subject by detecting the motion of the subject (p.126).
Page 124 Fully Automatic Shooting (Scene Intelligent Auto) For moving subjects, the AF point is displayed in blue and tracks subject movement. The camera does not beep. (Servo AF) Take the picture. Press the shutter button completely to take the picture. The image just captured will be displayed for approx.
Page 125 The shutter speed display is blinking. Since it is too dark, taking the picture may result in a blurred subject due to camera shake. Using a tripod or a Canon EL/EX series Speedlite (sold separately, p.177) is recommended. When the external flash was used, the bottom part of the picture came out unnaturally dark.
Page 126: A Full Auto Techniques (Scene Intelligent Auto)
A Full Auto Techniques (Scene Intelligent Auto) Recomposing the Shot Depending on the scene, positioning the subject toward the left or right to include a balanced background will result in a picture with better perspective. In the [ A ] mode, pressing the shutter button halfway to focus on a still subject will lock the focus on that subject.
Page 127 Full Auto Techniques (Scene Intelligent Auto) Scene Icons In the [ A ] shooting mode, the camera detects the scene type and sets everything automatically to suit the scene. The detected scene type is indicated on the upper left of the screen. For icon details, see page 623.
Page 128 Information Display (Still Photo Shooting) For details on the icons displayed for still photo shooting, see page 619. When < g > is displayed in white, it indicates that the image is displayed at the brightness level closely matching that of the actual image to be captured.
Page 129 Cautions for Still Photo Shooting Do not point the camera toward an intense light source, such as the sun or an intense artificial light source. Doing so may damage the image sensor or the camera’s internal components. “General Still Photo Shooting Cautions” are on pages 142–143. Notes for Still Photo Shooting The image’s field of view coverage is approx.
Page 130: Shooting With The Touch Shutter
x Shooting with the Touch Shutter Just by tapping on the screen, you can focus and take the picture automatically. Enable the Touch Shutter. Tap [ y ] on the screen’s bottom left. Each time you tap on the icon, it will toggle between [ y ] and [ x ].
Page 131 Shooting with the Touch Shutter Even if you set the drive mode to < o > or , the camera will still shoot in the single shooting mode. Even if [AF operation] is set to [Servo AF], tapping on the screen will focus on the image with [One-Shot AF].
Page 132: D : Program Ae
d : Program AE The camera automatically sets the shutter speed and aperture to suit the subject’s brightness. This is called Program AE. * [ d ] stands for Program. * AE stands for Auto Exposure. Set the shooting mode to [ d ]. Focus on the subject.
Page 133 Program AE If the “30"” shutter speed and the lowest f/number blink, it indicates underexposure. Increase the ISO speed or use flash. If the “1/8000” shutter speed and the highest f/number blink, it indicates overexposure. Lower the ISO speed or use an ND filter (sold separately) to reduce the amount of light entering the lens.
Page 134: S : Shutter-Priority Ae
s : Shutter-Priority AE In this mode, you set the shutter speed and the camera automatically sets the aperture to obtain the standard exposure matching the brightness of the subject. This is called shutter-priority AE. A faster shutter speed can freeze the action of a moving subject. A slower shutter speed can create a blurred effect, giving the impression of motion.
Page 135 Shutter-Priority AE If the lowest f/number blinks, it indicates underexposure. Turn the < 6 > dial to set a slower shutter speed until the aperture stops blinking or set a higher ISO speed. If the highest f/number blinks, it indicates overexposure. Turn the <...
Page 136: F : Aperture-Priority Ae
f : Aperture-Priority AE In this mode, you set the desired aperture and the camera sets the shutter speed automatically to obtain the standard exposure matching the subject brightness. This is called aperture-priority AE. A higher f/number (smaller aperture hole) will make more of the foreground and background fall within acceptable focus.
Page 137 Aperture-Priority AE If the “30"” shutter speed blinks, it indicates underexposure. Turn the < 6 > dial to set a larger aperture (lower f/number) until the shutter speed blinking stops or set a higher ISO speed. If the “1/8000” shutter speed blinks, it indicates overexposure.
Page 138: A : Manual Exposure
a : Manual Exposure In this mode, you set both the shutter speed and aperture as desired. To determine the exposure, refer to the exposure level indicator or use a commercially available exposure meter. This method is called manual exposure. * [ a ] stands for Manual.
Page 139 Manual Exposure Exposure Compensation with ISO Auto If the ISO speed is set to [AUTO] for manual exposure shooting, you can set exposure compensation (p.154) as follows: ● Touch the exposure level indicator ● [ z 3: Expo.comp./AEB] ● Quick Control screen If ISO Auto is set, the ISO speed setting will change to obtain the standard exposure with the set shutter speed and aperture.
Page 140: T : Flexible-Priority Ae
t : Flexible-Priority AE In this mode, you can set shutter speed, aperture, and ISO speed manually or automatically and combine these settings with your choice of exposure compensation. Shooting in [ t ] mode, with control over each of these parameters, is equivalent to shooting in [ d ], [ s ], [ f ], or [ a ] mode.
Page 141 Flexible-Priority AE Combinations of Functions in [ t ] Mode Shutter Exposure Shooting Aperture ISO Speed Speed Compensation Mode [AUTO] [AUTO] [AUTO] Available Similar to [ d ] Manual selection [AUTO] Manual [AUTO] Available Similar to [ s ] Manual selection selection [AUTO]...
Page 142 General Still Photo Shooting Cautions Image Quality When you shoot at high ISO speeds, noise (such as dots of light and banding) may become noticeable. Shooting in high temperatures may cause noise and irregular colors in the image. Continuous shooting over an extended period may cause the camera’s internal temperature to rise and affect image quality.
Page 143 General Still Photo Shooting Cautions Images and Display Under low- or bright-light conditions, the displayed image may not reflect the brightness of the captured image. Under low light, noise may be noticeable in image display even at low ISO speeds, but there will be less noise in your shots, because image quality varies between display and captured images.
Page 144: Selecting The Drive Mode
i Selecting the Drive Mode Single and continuous drive modes are provided. You can select the drive mode suiting the scene or subject. Press the button ( 9 ) With an image displayed on the screen, press the button. Select the drive mode item.
Page 145 Selecting the Drive Mode With Servo AF shooting: When [AF operation] is set to [Servo AF], the continuous shooting speed of max. approx. 5.0 shots/sec. will be given priority. In flash photography: With EL or EX series Speedlites, the continuous shooting speed will be max.
Page 146 Selecting the Drive Mode Approx. 8.0 shots/sec. is the maximum < o > high-speed continuous shooting speed (p.144) under these conditions: shooting with a fully charged battery in One-Shot AF mode at a 1/1000 sec. or faster shutter speed and maximum aperture (depending on the lens*), at room temperature (23°C / 73°F), with flicker reduction, Dual Pixel RAW shooting, and Digital Lens Optimizer disabled.
Page 147: Using The Self-Timer
j Using the Self-Timer Use the self-timer when you want to be in the picture such as a commemorative photograph. Press the button ( 9 ) With an image displayed on the screen, press the button. Select the drive mode item.
Page 148 Using the Self-Timer < l > enables you to shoot without touching the camera mounted on a tripod. This prevents camera shake if you shoot still lifes or long exposures. After taking self-timer shots, playing back the image (p.304) to check focus and exposure is recommended.
Page 149: Selecting The Display Speed For High-Speed Continuous Shooting
Selecting the Display Speed for High-Speed Continuous Shooting N High-speed display that switches between your shot and the live image is available when shooting with an RF lens, with [ 2 1: AF operation] set to [Servo AF], and with the drive mode set to < o > [High speed continuous].
Page 150: Silent Live View Shooting
Silent Live View Shooting N You can adjust the camera’s drive and shutter operating characteristics to suit shooting conditions or the lens used. Select [ z 6: Silent LV shoot.]. Set an option. Select an option, then press < 0 >. Mode 1 Enables quieter shooting than with [Disable].
Page 151: Silent Shooting
Silent Shooting N You can shoot silently, using the sensor’s electronic shutter feature, instead of with the mechanical shutter normally used in still photo shooting. This is useful when shooting where the camera must be quiet. Available in , < m >, or < l > drive mode. Select [ z 6: Silent shutter].
Page 152: Selecting The Metering Mode
q Selecting the Metering Mode N You can select one of four methods to measure the subject brightness. In [ A ] mode, evaluative metering is set automatically. Press the < Q > button ( 7 ) With an image displayed, press the <...
Page 153 Selecting the Metering Mode By default, the camera will set the exposure as follows. With [ q ] (Evaluative metering), holding down the shutter button halfway will lock the exposure setting (AE lock) after focus is achieved with One- Shot AF. In the [ w ] (Partial metering), [ r ] (Spot metering), and [ e ] (Center-weighted average metering) modes, the exposure is set at the moment the picture is taken.
Page 154: O Setting The Desired Exposure Compensation
O Setting the Desired Exposure Compensation N Exposure compensation can brighten (increased exposure) or darken (decreased exposure) the standard exposure set by the camera. Exposure compensation can be set in the [ t ], [ d ], [ s ], [ f ], and [ a ] shooting modes.
Page 155: Auto Exposure Bracketing (Aeb)
h Auto Exposure Bracketing (AEB) N By changing the shutter speed, aperture, or ISO speed automatically, you can bracket the exposure up to ±3 stops in 1/3-stop increments for three consecutive shots. This is called AEB. * AEB stands for Auto Exposure Bracketing. Select [ z 3: Expo.comp./AEB].
Page 156 Auto Exposure Bracketing (AEB) If [ z 3: Auto Lighting Optimizer] (p.104) is set to any setting other than [Disable], the effect of AEB may be reduced. < A > blinks in the lower left of the screen during AEB shooting. If the drive mode is set to <...
Page 157: A Locking The Exposure For Shooting (Ae Lock)
A Locking the Exposure for Shooting (AE Lock) N You can lock the exposure when you want to set the focus and exposure separately or when you are to take multiple shots at the same exposure setting. Press the < A > button to lock the exposure, then recompose and take the picture.
Page 158: Bulb: Long (Bulb) Exposures
BULB: Long (Bulb) Exposures In this mode, the shutter stays open as long as you hold down the shutter button completely, and closes when you let go of the shutter button. This photographic technique is called “bulb exposure”. Use bulb exposures for night scenes, fireworks, the heavens, and other subjects requiring long exposures.
Page 159 Long (Bulb) Exposures With [ z 5: Long exp. noise reduction], you can reduce the noise generated during long exposures (p.107). For bulb exposures, using a tripod and bulb timer is recommended. You can also shoot bulb exposures by using Remote Switch RS-60E3 (sold separately, p.176).
Page 160 Long (Bulb) Exposures Set the desired exposure time. Select the hour, minute, or second. Press < 0 > to display < r >. Set the desired number, then press < 0 >. (Returns to < s >.) Select [OK]. Take the picture. Press the shutter button completely, and the bulb exposure will start and continue until the set time elapses.
Page 161: W : Hdr (High Dynamic Range) Shooting
w : HDR (High Dynamic Range) Shooting N You can shoot still photos with clipped highlights and shadows reduced for a high dynamic range of tones even in high-contrast scenes. HDR shooting is effective for landscape and still-life shots. With HDR shooting, three images of different exposures (standard exposure, underexposure, and overexposure) are captured consecutively for each shot and then merged together automatically.
Page 162 HDR (High Dynamic Range) Shooting Effects [ P ] Natural For images preserving a wide tonal range where the highlight and shadow details would otherwise be lost. Clipped highlights and shadows will be reduced. [ A ] Art standard While the clipped highlights and shadows will be reduced more than with [Natural], the contrast will be lower, and the gradation flatter to have the picture look like a painting.
Page 163 HDR (High Dynamic Range) Shooting Set a [Continuous HDR] option. Select an option, then press < 0 >. With [1 shot only], HDR shooting will be canceled automatically after the shooting ends. With [Every shot], HDR shooting continues until the setting in step 2 is set to [Disable HDR].
Page 164 HDR (High Dynamic Range) Shooting RAW HDR images are captured in JPEG 73 image quality. RAW+JPEG HDR images are captured in the specified JPEG image quality. The three images captured to create an HDR image are also in the specified image quality.
Page 165 HDR (High Dynamic Range) Shooting When shooting HDR images with [Auto Image Align] set to [Enable], AF point display information (p.309) and Dust Delete Data (p.121) will not be appended to the image. If you perform handheld HDR shooting with [Auto Image Align] set to [Enable], image periphery will be slightly trimmed and resolution will be slightly lowered.
Page 166: P Multiple Exposures
P Multiple Exposures N As you shoot multiple exposures (2–9), you can see how the images will be merged into a single image. Select [ z 5: Multiple exposure]. Set a [Multiple exposure] option. Select an option, then press < 0 >. To exit shooting multiple exposures, select [Disable].
Page 167 Multiple Exposures Set [Multi-expos ctrl]. Select the desired multiple-exposure control method, then press < 0 >. Additive The exposure of each single image captured is added cumulatively. Based on the [No. of exposures], set a negative exposure compensation. Follow the basic guide below to set the exposure compensation amount.
Page 168 Multiple Exposures Specify the images to save. To save all single exposures and the multiple-exposure image, select [All images] and press < 0 >. To save only the multiple-exposure image, select [Result only] and press < 0 >. Set a [Continue Mult-exp] option. Select an option, then press <...
Page 169 Multiple Exposures Shoot the next exposures. When [On:Func/Ctrl] is set, images captured so far are displayed merged. To display only the current image, press the button repeatedly. Multiple-exposure shooting will end when the set number of exposures are taken.
Page 170 Multiple Exposures The image quality, ISO speed, Picture Style, high ISO speed noise reduction, color space, etc. set for the first single exposure will also be set for the subsequent exposures. If [ z 4: Picture Style] is set to [Auto], [Standard] will be applied for shooting.
Page 171 Multiple Exposures Merging Multiple Exposures with an Image Recorded on the Card You can select a RAW image recorded on the card as the first single exposure. The image data of the selected RAW image will remain intact. Only 1 or F images can be used. JPEG images cannot be selected.
Page 172 Multiple Exposures The ISO speed, Picture Style, high ISO speed noise reduction, color space, etc. set for the first image will also be applied for the subsequent images. If Picture Style is [Auto] for the image selected as the first image, [Standard] will be applied for shooting.
Page 173 Multiple Exposures Are there any restrictions on the image quality? All single exposures and the multiple-exposure image are captured at your specified image quality. All JPEG image quality settings can be selected. Can I merge images recorded on the card? With [Select image for multi.
Page 174: Remote Control Shooting
Remote Control Shooting Wireless Remote Control BR-E1 (sold separately) compatible with ® Bluetooth low energy technology enables remote control shooting up to approx. 5 meters/16.4 feet from the camera. Pairing To use BR-E1, you must first pair (connect and register) the camera and remote control.
Page 175 Remote Control Shooting Take the picture. By pressing the < > button on the remote control, you can also autofocus. To shoot, press the release button on the remote control. For detailed shooting instructions, refer to the BR-E1 instruction manual. You cannot use infrared remote control units such as Remote Controller RC-6.
Page 176: Using A Remote Switch
Using a Remote Switch You can shoot by connecting Remote Switch RS-60E3 (sold separately). For operating instructions, refer to the remote switch instruction manual. Open the terminal cover. Connect the plug to the remote control terminal.
Page 177: D Flash Photography
D Flash Photography EL/EX Series Speedlites for EOS Cameras Using an EL/EX series Speedlite (sold separately) makes flash photography easy. For operation procedures, refer to the EL/EX series Speedlite’s Instruction Manual. This camera is a Type-A camera that can use all the features of EL/EX series Speedlites.
Page 178 Non-Canon Flash Units Sync Speed The camera can synchronize with non-Canon compact flash units at 1/200 sec. and slower speeds. With large studio flash units, the flash duration is longer than that of a compact flash unit and varies depending on the model.
Page 179: Setting The Flash Function
Setting the Flash Function N With an EL/EX series Speedlite having compatible flash function settings, you can use the camera’s menu screen to set the Speedlite’s functions and Custom Functions. Attach the Speedlite to the camera and turn on the Speedlite before setting the flash functions. For details on the Speedlite’s functions, refer to the Speedlite’s Instruction Manual.
Page 180 Setting the Flash Function Flash Firing To enable flash photography, set to [Enable]. To disable flash firing or enable only the AF-assist beam, set to [Disable]. When a Speedlite is attached that supports auto flash firing, you can also configure the following settings to enable automatic firing as needed for shooting conditions.
Page 181 Setting the Flash Function Slow Synchro You can set the flash-sync speed for flash photography in [ f ] aperture- priority AE mode or [ d ] Program AE mode. ] 1/200-30sec. auto The flash sync speed is set automatically within a range of 1/200 sec. to 30 sec.
Page 182 Setting the Flash Function Safety FE To avoid overexposure from the flash firing during the day or at close range, the camera can automatically lower the ISO speed and shoot with standard subject exposure when set to ISO Auto. Flash Function Settings The information displayed, position of display, and available options vary depending on the Speedlite model, its Custom Function settings, the flash mode, and other factors.
Page 183 Setting the Flash Function Flash mode You can select the flash mode to suit your desired flash photography. [E-TTL II flash metering] is the standard mode of EL/EX series Speedlites for automatic flash photography. [Manual flash] is for setting the Speedlite’s [Flash output level] yourself.
Page 184 Setting the Flash Function Wireless functions / Flash ratio control Wireless (multiple) flash photography is possible with radio or optical transmission. For details on wireless flash, refer to the Instruction Manual of a Speedlite compatible with wireless flash photography. With a macro flash (MR-14EX II, etc.) compatible with flash function settings, you can set the flash ratio between flash tubes or flash heads A and B, or use...
Page 185 Setting the Flash Function Shutter synchronization Normally, set this to [First-curtain synchronization] so that the flash fires immediately after the exposure starts. If [Second-curtain synchronization] is set, the flash will be fired right before the shutter closes. When this is combined with a slow shutter speed, you can create a trail of light such as from car headlights at night with a more natural feel.
Page 186 Setting the Flash Function Flash exposure compensation You can set flash exposure compensation up to ±3 stops in 1/3-stop increments. For details, refer to the Speedlite’s Instruction Manual. If flash exposure compensation is set with the Speedlite, you cannot set the flash exposure compensation with the camera.
Page 187 Setting the Flash Function Flash Custom Function Settings For details on the Speedlite’s Custom Functions, refer to the Speedlite’s (sold separately) Instruction Manual. Select [Flash C.Fn settings]. Set the desired functions. Select the number, then press < 0 >. Select an option, then press < 0 >. With an EL/EX series Speedlite, the Speedlite will always fire at full output if the [Flash metering mode] Custom Function is set to [TTL] (autoflash).
Page 188: Shooting Movies
Shooting Movies [Shooting Mode] Settings for Movies To prepare for movie shooting, press the < W > button, then press the button to access the [Shooting mode] screen at left. [ y ] : Scene Intelligent Auto (p.209) [ k ] : Program AE (p.209) [ t ] : Shutter-priority AE (p.210) [ v ] : Aperture-priority AE (p.211)
Page 189: Tab Menus: Movie Shooting
Tab Menus: Movie Shooting Shooting 1 p.192 p.219 p.202 p.205 p.220 Shooting 2 p.245 p.224 p.245 Shooting 3 p.246 p.246 p.247 p.247 p.248 p.249 p.249...
Page 190 Tab Menus: Movie Shooting Shooting 4 p.250 p.250 p.250 p.250 p.236 p.250 p.251 In [ y ] mode, the following screens are displayed. Shooting 1 p.192 p.202 p.205 p.220 Shooting 2 p.224 p.245 p.251...
Page 191: Index To Features: Movie Shooting
Sound recording p.202 Time code p.205 Movie cropping p.219 Movie digital IS p.220 HDR movie p.222 Time-lapse movie p.224 Canon Log p.236 Lens aberration correction p.245 Remote control shooting p.245 Exposure compensation p.246 ISO speed (movie) p.246 Auto Lighting Optimizer p.247...
Page 192: Setting The Movie Recording Quality
Setting the Movie Recording Quality Under the [ z 1: Movie rec quality] tab, select [Movie rec. size] to set the image size, frame rate, and compression method. The movie will be recorded as an MP4 file. The frame rate displayed on the [Movie rec.
Page 193 Setting the Movie Recording Quality If you change the [ 5 3: Video system] setting, also set [ z 1: Movie rec quality] again. Normal playback of 4K, L8 / 7 , and High Frame Rate movies, for example, may not be possible on other devices, because playback is processing-intensive.
Page 194 Setting the Movie Recording Quality Movie-Recording Coverage Image sensor coverage for movies varies depending on movie recording quality and cropped shooting settings and the lens used. With EF-S lenses, movies are cropped around the center of the image. RF or EF lenses: With [ z 1: Movie cropping] set to [Disable] Full HD 4K time-lapse Full HD time-lapse...
Page 195 Setting the Movie Recording Quality Frame rate (fps: frame per second) [ 2 ] 119.9fps/[ 8 ] 59.94fps/[ 6 ] 29.97fps For areas where the TV system is NTSC (North America, Japan, South Korea, Mexico, etc.). For , see page 199. [ 3 ] 100.0fps/[ 7 ] 50.00fps/[ 5 ] 25.00fps For areas where the TV system is PAL (Europe, Russia, China, Australia, etc.).
Page 196 Setting the Movie Recording Quality Movie recording format [ C ] MP4 All movies you shoot with the camera are recorded as movie files in MP4 format (file extension “.MP4”). This file format provides higher compatibility for playback than with MOV.
Page 197 Setting the Movie Recording Quality Cards that Can Record Movies For details on cards that can record at each level of movie recording quality, see page 611. When shooting movies, use a high-capacity card with a writing/reading speed (as specified in card performance requirements) shown in the table on page 611 or higher than the standard specification.
Page 198 Setting the Movie Recording Quality 24.00p Records movies at a frame rate of 24.00 fps. When [Enable] is set, you can select the movie recording quality as follows: HBW , HBX , LBW , or LBX . If you set [Movie rec. size] before setting [24.00p] to [Enable], set [Movie rec.
Page 199 Setting the Movie Recording Quality High Frame Rate You can shoot HD movies at a high frame rate of 119.9 fps or 100.0 fps. This is ideal for shooting movies that will be played back in slow motion. The maximum recording time per movie is 7 min. 29 sec. Movies are recorded as w2W or w3W .
Page 200 Setting the Movie Recording Quality Movie Files Exceeding 4 GB Even if you shoot a movie exceeding 4 GB, you can keep shooting without interruption. Using SD/SDHC cards formatted with the camera If you use the camera to format an SD/SDHC card, the camera will format it in FAT32.
Page 201 Setting the Movie Recording Quality Total Movie Recording Time and File Size Per Minute For details on file sizes and the recording time available at each level of recording quality, see page 612. Movie Shooting Time Limit When shooting non-High Frame Rate movies The maximum recording time per movie is 29 min.
Page 202: Setting The Sound Recording
Setting the Sound Recording You can shoot movies while recording sound with the built-in stereo microphone or an external stereo microphone. You can also freely adjust the sound- recording level. Use [ z 1: Sound recording] to set sound recording functions. Audio is recorded in LPCM format for movies with ALL-I compression and AAC for movies with IPB compression.
Page 203 Setting the Sound Recording Attenuator Automatically suppresses sound distortion caused by loud noises. Even if [Sound rec.] is set to [Auto] or [Manual] for shooting, sound distortion may still result if there is a very loud sound. In such a case, setting it to [Enable] is recommended.
Page 204 Setting the Sound Recording Sounds from Wi-Fi operations may be captured with built-in or external microphones. During sound recording, using the wireless communication function is not recommended. When connecting an external microphone or headphones to the camera, be sure to insert the plug all the way in. The camera’s built-in microphone will also record the operation sound and mechanical sound of the camera during shooting.
Page 205: Setting The Time Code
Setting the Time Code As movies are recorded, a time code is also recorded automatically to keep track of the time for synchronization. Time codes are constantly recorded in hours, minutes, seconds, and frames. They are mainly used when movies are edited. To set up the time code, use [ z 1: Time code].
Page 206 Setting the Time Code Movie Recording Count You can select how time is displayed on the movie shooting screen. Rec time Displays the time that has elapsed since you started shooting the movie. Time code Displays the time code during movie recording. Movie Playback Count You can select how time is displayed on the movie playback screen.
Page 207 Setting the Time Code HDMI Time code Time codes can be added to movies as you record them to an external device via HDMI. No time code is added to HDMI video output. Adds a time code to HDMI video output. When [On] is set, [Rec Command] is displayed.
Page 208 Setting the Time Code Drop Frame The time code will not match the actual time when frames are counted in the time code if the frame rate is set to 2 (119.9 fps), 8 (59.94 fps), or 6 (29.97 fps). The discrepancy is corrected automatically when [Enable] is set.
Page 209: Shooting Movies
k Shooting Movies y / k Autoexposure Shooting When the shooting mode is set to [ y ] or [ k ], autoexposure control will take effect to suit the scene’s current brightness. Set the shooting mode to [ y ] or [ k ].
Page 210 Shooting Movies t Shutter-Priority AE [ t ] mode enables you to set your preferred shutter speed for movies. ISO speed and aperture are set automatically to suit the brightness and obtain standard exposure. Set the shooting mode to [ t ]. Set the desired shutter speed (1).
Page 211 Shooting Movies v Aperture-Priority AE [ v ] mode enables you to set your preferred aperture for movies. ISO speed and shutter speed are set automatically to suit the brightness and obtain standard exposure. Set the shooting mode to [ v ]. Set the desired aperture (1).
Page 212 Shooting Movies Notes for [ y ], [ k ], [ t ], and [ v ] Modes In the [ y ] mode, the scene icon for the scene detected by the camera is displayed on the upper left of the screen (p.623). You can lock the exposure (AE lock) by pressing the <...
Page 213 Shooting Movies M Manual Exposure Shooting You can manually set the shutter speed, aperture, and ISO speed for movie shooting. Using manual exposure to shoot movies is for advanced users. Set the shooting mode to [ M ]. Set the ISO speed. Press the <...
Page 214 Shooting Movies For movie shooting, the ISO speed cannot be expanded to L (equivalent to ISO 50). When switching from still photo shooting to movie shooting, check the camera settings again before shooting movies. During movie shooting, avoid changing the shutter speed or aperture. Doing so may record the changes in the exposure or create more noise at high ISO speeds.
Page 215 Shooting Movies ISO Speed in [ M ] Mode In [ M ] mode, you can set the ISO speed manually or select [AUTO] to set it automatically. For details on the ISO speed, see page 614. Shutter Speed Available shutter speeds in [ t ] (shutter-priority AE) and [ M ] (manual exposure) modes vary depending on the frame rate of your specified movie recording quality.
Page 216 Shooting Movies Still Photo Shooting Still photos cannot be taken during movie shooting. To take still photos, stop recording and change the [Shooting mode] setting to still photos (p.70) first. Information Display (Movie Shooting) For details on the icons displayed for movie shooting, see page 621.
Page 217 Cautions for Movie Shooting Do not point the camera toward an intense light source, such as the sun or an intense artificial light source. Doing so may damage the image sensor or the camera’s internal components. If you shoot something that has fine detail, moire or false colors may result.
Page 218 Notes for Movie Shooting Each time you shoot a movie, a new movie file is created on the card. The movie’s field of view coverage for shooting 4K, Full HD, and HD movies is approx. 100%. You can also focus by pressing the button. To enable starting or stopping movie shooting by pressing the shutter button completely, set [Fully-press] for [ 5 4: V btn function] to [Start/ stop mov rec].
Page 219: Movie Cropping
Movie Cropping N With RF or EF lenses, movies can be cropped around the center of the image, as if using a telephoto lens. Shooting movies with EF-S lenses has the same effect as this movie cropping feature. Select [ z 1: Movie cropping]. Select [Enable].
Page 220: Movie Digital Is
Movie Digital IS In-camera image stabilization electronically corrects camera shake during movie shooting. This function is called “Movie digital IS”. With Movie digital IS, images can be stabilized even when using a lens without Image Stabilizer. When using a lens with built-in optical Image Stabilizer, set the lens’s Image Stabilizer switch to <...
Page 221 (the subject momentarily looks out of focus) due to the effects of the Movie digital IS. When using a TS-E lens, fish-eye lens, or non-Canon lens, setting Movie digital IS to [Disable] is recommended. Since Movie digital IS magnifies the image, the image looks more grainy.
Page 222: Shooting Hdr Movies
Shooting HDR Movies You can shoot high dynamic range movies that retain detail in highlights of high-contrast scenes. You can specify to shoot HDR movies from the Quick Control screen when using RF or EF lenses with [Movie rec. size] under [ z 1: Movie rec.
Page 223 Minimum ISO speed in [ t ] mode is ISO 400. HDR movie shooting is not available with [ z 1: Movie digital IS], [ z 2: Time-lapse movie], [ z 3: Highlight tone priority], or [Canon Log]. Images may still flicker in HDR movie shooting even when a suitable shutter speed is set.
Page 224: Shooting Time-Lapse Movies
a Shooting Time-lapse Movies Still photos shot at a set interval can be stitched together automatically to create a 4K or Full HD time-lapse movie. A time-lapse movie shows how a subject changes in a much shorter period of time than the actual time it took.
Page 225 Shooting Time-lapse Movies Enable H (3840x2160) The movie is recorded in 4K quality. The aspect ratio is 16:9. The frame rate is 29.97 fps ( 6 ) for NTSC and 25.00 fps ( 5 ) for PAL, and movies are recorded in MP4 ( C ) format with ALL-I ( W ) compression.
Page 226 Shooting Time-lapse Movies Set the number of shots. Select [No. of shots]. Refer to the [ k : Time required] and [ 3 : Playback time] to set the number. Select the digit. Press < 0 > to display < r >. Set the desired number, then press <...
Page 227 Shooting Time-lapse Movies Select the exposure’s setting method. Select [Auto exposure]. Select an option, then press < 0 >. Fixed 1st frame When taking the first shot, metering is performed to set the exposure automatically to match the brightness. The exposure setting for the first shot will be applied to subsequent shots.
Page 228 Shooting Time-lapse Movies Set the beeper. Select [Beep as img taken]. If [Disable] is set, the beeper will not sound for shooting. Check the settings. (1) Time required Indicates the time required to shoot the set number of shots with the set interval.
Page 229 Shooting Time-lapse Movies Read the message. Read the message and select [OK]. Take test shots. As with still photo shooting, set the exposure and shooting functions, then press the shutter button halfway to focus. Press the shutter button completely to take test shots.
Page 230 Shooting Time-lapse Movies Press the movie shooting button. The camera will be ready to start shooting a time-lapse movie. To return to step 13, press the movie shooting button again. Shoot the time-lapse movie. Press the button and check again the “Time required (1)”...
Page 231 Shooting Time-lapse Movies Using a tripod is recommended. Taking test shots as in step 13 and shooting test movies for time-lapse movies beforehand is recommended. Regardless of the [Movie rec. size] setting under [ z 1: Movie rec quality], 4K time-lapse movies are recorded in H6W (NTSC)/ H5W (PAL), and Full HD time-lapse movies are recorded in L 6 W (NTSC)/ L 5 W (PAL).
Page 232 Shooting Time-lapse Movies Do not point the camera toward an intense light source, such as the sun or an intense artificial light source. Doing so may damage the image sensor or the camera’s internal components. If the camera is connected to a computer with the interface cable, or if an HDMI cable is connected to the camera, you cannot select [Enable].
Page 233 Shooting Time-lapse Movies If the shutter speed exceeds the shooting interval (such as for long exposures), or if a slow shutter speed is set automatically, the camera may not be able to shoot at the set interval. Shooting may also be prevented by shooting intervals nearly the same as the shutter speed.
Page 234 Shooting Time-lapse Movies If you start time-lapse movie shooting while the white < s > temperature warning (p.253) is displayed, the image quality of the time-lapse movie may decline. It is recommended that you start time-lapse movie shooting after the white < s > disappears (camera’s internal temperature decreases).
Page 235 Shooting Time-lapse Movies You can use Wireless Remote Control BR-E1 (sold separately, p.174) to start and stop the time-lapse movie shooting. With Wireless Remote Control BR-E1 • First pair the Wireless Remote Control BR-E1 with the camera (p.408). • Set [ z 2: Remote control] to [Enable]. •...
Page 236: Shooting Movies Set To Canon Log
With minimal loss of detail in shadows and highlights, movies retain more visual information across the dynamic range. To work with Canon Log movies in postproduction, you can apply look-up tables (LUTs). LUT data can be downloaded from the Canon website.
Page 237 Shooting Movies Set to Canon Log Set the options as desired. Set [View Assist.], [Color Matrix] [Characteristics], and [HDMI color space]. For details, see pages 239–241. Set up shooting. Set the ISO speed manually (p.242). Set the shutter speed and aperture.
Page 238 [ A ] and [On (10bit)] is set for [ ] (movie C3) mode. YCbCr 4:2:0 (8-bit) color sampling and the Rec. ITU-R BT.709 color space are used when recording with Canon Log to the card, just as in regular movie shooting.
Page 239 ● Setting this feature to [On] does not affect movies recorded to the card, which are recorded using Canon Log. Similarly, HDMI video output has Canon Log characteristics, and View Assist is not used for it. [V.Assist] is displayed on the information display screen when View Assist is used.
Page 240 Shooting Movies Set to Canon Log Color Matrix Using a color matrix, you can specify how colors are reproduced, to plan for postproduction processing. Cinema EOS Original Reproduces [Cinema EOS Original] colors as used on professional Cinema EOS cameras. Neutral Reproduces [Neutral] colors as used on professional Cinema EOS cameras.
Page 241 * Reds, greens, and blues cannot be adjusted separately. HDMI color space [HDMI color space] can be set when [Canon Log] is set to [On (10bit)] and [Color Matrix] to [Neutral]. Choose [BT.709] or [BT.2020] as the color space for HDMI output.
Page 242 Shooting Settings Shooting with ISO Auto is not possible, and if set to ISO Auto when Canon Log is specified, the setting is changed to ISO 400. Set the ISO speed manually. Manually setting the ISO speed to 100–320 will make the dynamic range narrower.
Page 243 General Canon Log Shooting Precautions HDR movies are not available when Canon Log is set. Specifying Canon Log will set [Peripheral illum corr] under [ z 2: Lens aberration correction] to [Disable]. Canon Log 2 and Canon Log 3 are not supported.
Page 244: Menu Function Settings
Menu Function Settings This section describes menus used for shooting movies. [ z 1] Movie recording quality For details on movie recording quality, see page 192. Movie cropping M For details on movie cropping, see page 219. Sound recording For details on sound recording, see page 202. Time code For details on time codes, see page 205.
Page 245 Menu Function Settings [ z 2] Lens aberration correction M Peripheral illumination, distortion, and chromatic aberration can be corrected as you shoot movies. For details on lens aberration correction, see page 110. Time-lapse movie For details on shooting time-lapse movies, see page 224. Remote control shooting When [Enable] is set, you can start or stop movie shooting using Wireless Remote Control BR-E1 (sold separately, p.174).
Page 246 Menu Function Settings [ z 3] M Exposure compensation Exposure compensation is available in a range of ±3 stops, in 1/3- stop increments. For details on exposure compensation, see page 154. k ISO speed settings M ISO speed In [ ] mode, you can set the ISO speed manually.
Page 247 Menu Function Settings H ISO Auto You can set the maximum limit for ISO Auto in 4K movie shooting in [ ], [ ], or [ ] mode or in [ ] mode with ISO Auto. By default, it is set to [Max.:12800]. You can set the maximum limit within [Max.:6400] to [Max.:H2(102400)].
Page 248 Menu Function Settings k Auto slow shutter M You can choose whether to shoot movies that are brighter and less noisy than when set to [Disable] by automatically slowing the shutter speed under low light. Available in [ k ] and [ v ] shooting modes.
Page 249 Menu Function Settings Metering timer M For details on the metering timer, see page 119. k Av 1/8-stop increments M You can set aperture values on a finer scale when shooting movies with an RF lens. Select [Enable] to change the aperture increment from 1/3 stop (or 1/2 stop) to 1/8 stop in [ v ] or [ M ] mode.
Page 250 Picture Style M For details on Picture Styles, see page 88. Canon Log settings M For details on Canon Log, see page 236. High ISO speed noise reduction M For details on High ISO speed noise reduction, see page 105.
Page 251 Menu Function Settings HDMI display You can specify how movies are displayed as they are recorded via HDMI to an external device. Movie output itself is either 4K (3840×2160) or Full HD (1920×1080), depending on the [Movie rec. size] setting. The default setting for HDMI display is [ A + a ].
Page 252 Menu Function Settings For Longer HDMI Output To continue HDMI output for longer than 30 min., select [ A + a ], then set [Auto power off] under [ 5 2: Power saving] to [Disable] (p.377). HDMI output will continue after the screen turns off when the time set in [Display off] elapses.
Page 253 In low light, noise or irregular colors may appear in the image. Movies are recorded almost exactly as they appear on the screen, except in time-lapse movie shooting or with Canon Log View Assist. If you play back a movie with other devices, image or sound quality may decline or playback may not be possible (even if the devices support MP4 format).
Page 254 General Movie Shooting Cautions Recording and Image Quality If you use a card with a slow writing speed, an indicator may appear on the right of the screen during movie shooting. It indicates how much data has not yet been written to the card (remaining capacity of the internal buffer memory).
Page 255 This chapter describes autofocus operation and introduces menu settings on the AF ([ 2 ]) tab. A M icon to the right of a page title indicates that the function is available only in [ t ], [ d ], [ s ], [ f ], [ a ], or [BULB] mode.
Page 256: Tab Menus: Af (Still Photos)
Tab Menus: AF (Still Photos) p.262 p.265 p.276 p.277 p.278 p.279 p.283 p.284...
Page 257 Tab Menus: AF (Still Photos) p.288 p.289 p.290 p.293 p.295 p.296 p.297 p.298 p.299 p.300 Features in [ 2 3], [ 2 4], and [ 2 5] menus are described in the camera’s Help system (p.405).
Page 258 Tab Menus: AF (Still Photos) In [ A ] mode, the following screen is displayed. p.278 p.279 p.263 p.284...
Page 259: Tab Menus: Af (Movies)
Tab Menus: AF (Movies) p.265 p.279 p.286 p.283 p.284...
Page 260 Tab Menus: AF (Movies) p.291 p.292 p.293 p.297 p.298 Features in [ 2 3], [ 2 4], and [ 2 5] menus are described in the camera’s Help system (p.405).
Page 261 Tab Menus: AF (Movies) In [ y ] mode, the following screen is displayed. p.279 p.286 p.284...
Page 262: Selecting The Af Operation
Selecting the AF Operation N You can select the AF operation characteristics to suit the shooting conditions or subject. Select [ 2 1: AF operation]. Select an item. If focus cannot be achieved, the AF point will turn orange. If this occurs, the picture cannot be taken even if the shutter button is pressed completely.
Page 263 Selecting the AF Operation One-Shot AF for Still Subjects (ONE SHOT) Suited for still subjects. When you press the shutter button halfway, the camera will focus only once. When focus is achieved, the AF point will turn green and the beeper will sound. The focus remains locked while you hold down the shutter button halfway, allowing you to recompose the image before taking the picture.
Page 264 Selecting the AF Operation AF-Assist Beam Under low light, the AF-assist beam may be lit continuously when you press the shutter button halfway. This makes it easier to focus with AF. The AF-assist beam does not fire when [ 2 1: AF operation] is set to [Servo AF].
Page 265: Selecting The Af Method
Selecting the AF Method You can select the AF method to suit the shooting conditions or subject. The camera attempts to focus on faces of any people in an AF point or Zone AF frame. In [ A ] mode, [ u +Tracking] is set automatically. For instructions on selecting an AF method, see page 268.
Page 266 Selecting the AF Method : Expand AF area ( Z ) Focusing uses one AF point < S > and points above, below, and to the left and right < w >. Effective for moving subjects, which are difficult to track with 1-point Although Servo AF requires you to focus on a subject initially with an AF point <...
Page 267 Selecting the AF Method : Large Zone AF: Vertical Uses auto selection AF in a vertical Large Zone AF frame to cover a larger area than Zone AF, which makes focusing easier than with 1-point AF/AF point expansion and also effective for moving subjects.
Page 268 Selecting the AF Method Selecting the AF Method M You can select the AF method to suit the shooting conditions or subject. If you prefer to focus manually, see page 281. Select [ 2 1: AF method]. Select an item. To set the AF method, you can also access the AF method screen by pressing the <...
Page 269 Selecting the AF Method u (face)+Tracking: c The camera detects and focuses on human faces. If a face moves, the AF point also moves to track the face. Check the AF point. (an AF point) appears over any face detected.
Page 270 Selecting the AF Method Specifying a Subject for Focus On the screen, tap where you want to focus, whether on a subject or at a certain position. Once the AF point < > achieves focus, the AF point will also move to track the subject if you change the composition or if the subject moves.
Page 271 Selecting the AF Method 1-point AF / Expand AF area ( Z ) / Expand AF area: Around / Zone AF / Large Zone AF: Vertical / Large Zone AF: Horizontal M You can manually set the AF point or Zone AF frame. Here, 1-point AF screens are used as an example.
Page 272 Selecting the AF Method Focus on the subject. Aim the AF point over the subject and press the shutter button halfway. When focus is achieved, the AF point will turn green and the beeper will sound. If focus is not achieved, the AF point will turn orange.
Page 273 Selecting the AF Method Magnified View You can check the focus by magnifying display by approx. 5x or 10x. Magnified view is not possible with [ u +Tracking]. Magnification is centered on the AF point for [1-point AF], [Expand AF area ( Z )], and [Expand AF area: Around] and is centered on the Zone AF frame for [Zone AF], [Large Zone AF: Vertical], and [Large Zone AF: Horizontal].
Page 274 Selecting the AF Method Notes for AF AF Operation Even when focus is achieved, pressing the shutter button halfway will focus again. Image brightness may change during autofocusing. Depending on the subject and shooting conditions, it may take longer to focus, or the continuous shooting speed may decrease. If the light source changes as you shoot, the screen may flicker, and focusing may be difficult.
Page 275 Selecting the AF Method Shooting Conditions that Make Focusing Difficult Subject with low-contrast such as the blue sky, solid-color flat surfaces or when highlight or shadow details are clipped. Subjects in low light. Stripes and other patterns where there is contrast only in the horizontal direction.
Page 276: Setting The Af Point Size
Setting the AF Point Size N For pinpoint focusing, you can set [AF frame size] to [Small]. Select [ 2 1: AF frame size]. Select an item. Only available when [ 2 1: AF operation] is set to [One-Shot AF] and [ 2 1: AF method] is set to [1-point AF].
Page 277: Focusing On People's Eyes
Focusing on People’s Eyes N You can shoot with the subject’s eyes in focus. Select [ 2 1: Eye Detection AF]. Select [Enable]. Aim the camera at the subject. An AF point is displayed around their eye. You can also touch the screen to select an eye.
Page 278: Setting Continuous Af
Setting Continuous AF This function keeps subjects generally in focus. The camera is ready to focus immediately when you press the shutter button halfway. Select [ 2 1: Continuous AF]. Select [Enable]. Enabling this function reduces the number of shots available, because the lens is driven continuously and battery power is consumed.
Page 279: Setting Touch & Drag Af
Setting Touch & Drag AF You can move the AF point or Zone AF frame by touching or dragging on the screen as you look through the viewfinder. Enabling Touch & Drag AF Select [ 2 1: Touch & drag AF settings].
Page 280 Setting Touch & Drag AF Active Touch Area You can specify the area of the screen used for touch and drag operations. Set the active touch area. Select an item. Touching the screen when [ u +Tracking] is set displays a round orange frame <...
Page 281: Mf: Focusing Manually
MF: Focusing Manually If focusing is not possible with autofocus, you can magnify the image and focus manually. Set the lens’s focus mode switch to <MF>. Turn the lens focusing ring to focus roughly. Magnify the image. Press the button, then the <...
Page 282 MF: Focusing Manually Adjust magnification. Each press of the button changes the magnification ratio, as follows. 1x → 5x → 10x Focus manually. While looking at the magnified image, turn the lens focusing ring to focus. After focusing, press < 0 > to return to the normal view.
Page 283 ISO expansion is set. If necessary, lower the ISO speed or set [Peaking] to [Off]. Peaking display shown on the screen is not recorded in images. MF peaking may be hard to discern when Canon Log is set. If necessary, set [View Assist.] to [On].
Page 284 MF: Focusing Manually Focus Guide Setting [Focus guide] to [On] provides a visual guide that shows which direction to adjust focus and the extent of adjustment needed. The guide frame is displayed near any eyes that are detected for the main subject when [ 2 1: AF method] is set to [ u +Tracking] and [ 2 1: Eye Detection AF] is set to [Enable].
Page 285 MF: Focusing Manually Under difficult shooting conditions for AF (p.275), the guide frame may not be displayed correctly. No AF points are displayed while the guide frame is displayed. No adjustment information is detected for apertures darker than f/8 when MP-E 65mm f/2.8 1-5x Macro Photo is used or darker than f/11 for other lenses, as indicated by the Focus Guide appearance.
Page 286: Setting Movie Servo Af
Setting Movie Servo AF With this function enabled, the camera focuses on the subject continuously during movie shooting. Select [ 2 1: Movie Servo AF]. Select [Enable]. When [Enable] is set: ● The camera focuses on the subject continuously even when you are not pressing the shutter button halfway.
Page 287 Setting Movie Servo AF Cautions When [Movie Servo AF] is Set to [Enable] Shooting Conditions that Make Focusing Difficult • A fast-moving subject approaching or moving away from the camera. • A subject moving at a close distance to the camera. •...
Page 288: Customizing Af Functions
Customizing AF Functions N [ 2 3] Tracking sensitivity You can set the subject-tracking sensitivity, which affects responsiveness to interfering objects that move across AF points or subjects that stray from AF points during Servo AF. Standard setting. Suitable for moving subjects in general. Locked on: -2 / Locked on: -1 The camera will try to continue focusing on the subject even if an obstacle cuts across the AF points or if the subject strays from...
Page 289 Customizing AF Functions Acceleration/deceleration tracking Sets the Servo AF tracking sensitivity for subjects that change speed suddenly, as by suddenly moving or stopping. Suited for subjects that move at a steady speed (minor changes in moving speed). -2 / -1 Suited for subjects that move at a steady speed (minor changes in moving speed).
Page 290 Customizing AF Functions AF point auto switching This sets the switching sensitivity of the AF points as they track the subject moving dramatically up, down, left, or right. Takes effect when [ 2 1: AF method] is set to [Face+Tracking], [Expand AF area: Z ], [Expand AF area: Around], [Zone AF], [Large Zone AF: Vertical], or [Large Zone AF: Horizontal].
Page 291 Customizing AF Functions Movie Servo AF track sensitivity You can adjust the tracking sensitivity (to one of seven levels), which affects responsiveness if the subject strays from the AF point during Movie Servo AF, as when interfering objects move across AF points or when you pan.
Page 292 * Lenses supporting slow focus transition during movie shooting USM and STM lenses released in and after 2009 are compatible. For details, refer to the Canon Web site. With certain lenses, even if you adjust the AF speed, the speed may not change.
Page 293 Customizing AF Functions [ 2 4] Lens electronic MF With the USM and STM lenses equipped with electronic manual focusing, you can set whether to use electronic manual focusing after autofocusing in One-Shot AF mode. Select [ 2 4: Lens electronic MF]. Select an item.
Page 294 Customizing AF Functions ] Disable in AF mode Manual focus adjustment is disabled when the lens’s focus mode switch is set to <AF>. With [One-Shot 9 enabled (magnify)], display may not be magnified even if you turn the lens focusing ring while pressing the shutter button halfway immediately after shooting.
Page 295 Customizing AF Functions AF-assist beam firing Enables or disables the AF-assist beam of the camera or an external Speedlite for EOS cameras. Select [ 2 4: AF-assist beam firing]. Select an item. [ON] Enable Enables firing of the AF-assist beam, when needed. [OFF] Disable Disables firing of the AF-assist beam.
Page 296 Customizing AF Functions One-Shot AF release priority You can specify whether to prioritize focus or release timing for One- Shot AF (except when shooting with Touch Shutter). Select [ 2 4: One-Shot AF release prior.]. Select an item. [ ] Focus priority The picture will not be taken until focus is achieved.
Page 297 Customizing AF Functions [ 2 5] Lens drive when AF impossible If focus cannot be achieved with autofocus, you can have the camera keep searching for the precise focus or have it stop searching. Select [ 2 5: Lens drive when AF impossible].
Page 298 Customizing AF Functions Limit AF methods You can limit the AF methods available to those that you will use. For details on AF methods, see page 265. Select [ 2 5: Limit AF methods]. To limit the available AF methods, add a checkmark [ X ] to the ones to display.
Page 299 Customizing AF Functions Orientation linked AF point You can assign AF points or Zone AF frames to different positions based on whether you are shooting vertically or horizontally. Select [ 2 5: Orientation linked AF point]. Select an item. ] Same for both vert/horiz AF points or Zone AF frames in the same position are used for both vertical and horizontal shooting.
Page 300 Customizing AF Functions Initial Servo AF pt for c You can set the initial AF point for Servo AF when the AF method is set to [Face+Tracking]. Select [ 2 5: Initial Servo AF pt for c ]. Select an item. ] Initial AF pt set for c Servo AF starts from the manually set AF point when AF operation is set to [Servo AF] and the AF method is set to [ u +Tracking].
Page 301: Playback
Playback This chapter covers topics related to playback—playing back captured still photos and movies—and introduces menu settings on the Playback ([ x ]) tab. Images shot and saved with another device Normal display or selection on this camera may not be possible for images captured on other cameras, or images from this camera that have been edited or renamed on a computer.
Page 302: Tab Menus: Playback
Tab Menus: Playback Playback 1 p.318 p.317 p.335 p.353 p.357 p.348 p.339 Playback 2 p.346 p.345 p.321 p.331 p.313 p.311 Playback 3 p.307 p.309 p.309 p.305 p.206 p.305 p.316 [ 3 1: RAW image processing] is not shown in [ A ] or [ y ] mode.
Page 303: Index To Features: Playback And Related Operations
Index to Features: Playback and Related Operations Playback Image Transfer Single-image display p.304 Image transfer to a computer/FTP server p.348 Shooting information display p.305 Print order (DPOF) p.353 Grid display p.305 Photobook Set-up p.357 Touch playback p.306 Playback information display p.307 Index display p.310...
Page 304: Image Playback
x Image Playback Single-Image Display Play back the image. Press the < x > button. Select an image. To play back newer images, press the < Z > button, and to play back older images, press the < Y > button. Each time you press the <...
Page 305 Image Playback Shooting Information Display With the shooting information screen displayed, you can press the < W > < X > keys to change the information displayed. You can also customize the information displayed, in [ x 3: Playback information display] (p.307).
Page 306 Image Playback Touch Playback The camera features a touch-screen panel that you can touch to control playback. Supported touch operations are like those used with smartphones and similar devices. First, press the < x > button to prepare for touch playback. Browsing images Jump display Index display...
Page 307: Customizing Playback Information Display
Customizing Playback Information Display You can specify screens and accompanying information displayed during image playback. Select [ 3 3: Playback information display]. Add a checkmark [ X ] next to the number of screens to display. Press the < W > < X > keys to select a number.
Page 308 Customizing Playback Information Display [Brightness] display This histogram is a graph showing the Sample Histograms distribution of the image’s brightness level. The horizontal axis indicates the brightness level (darker on the left and brighter on the right) while the vertical axis indicates how Dark image many pixels exist for each brightness level.
Page 309 Customizing Playback Information Display Highlight Alert When [ 3 3: Highlight alert] is set to [Enable], overexposed, clipped highlights will blink. To obtain more detailed gradation in the blinking areas where you want the gradation to be faithfully reproduced, set the exposure compensation to a negative amount and shoot again for a better result.
Page 310: H Index Display (Multiple-Image Display)
H Index Display (Multiple-Image Display) Search for images quickly with the index display showing 4, 9, 36, or 100 images on one screen. Press the button. During image playback, press the < > button. ] will be displayed on the lower right of the screen.
Page 311: Jump Display (Jumping Through Images)
e Jump Display (Jumping Through Images) In the single-image display, you can turn the < 6 > dial to jump through the images forward or backward according to the jump method set. Select [ x 2: Image jump w/ 6 ]. Select the jump method.
Page 312 Jump Display (Jumping Through Images) Browse by jumping. Press the < x > button. In the single-image display, turn the < 6 > dial. You can browse by the set method. (1) Jump method (2) Playback position To search images by shooting date, select [ g : Date]. To search images by folder, select [ h : Folder].
Page 313: Filtering Images For Playback
t Filtering Images for Playback You can filter image display according to your search conditions. After setting the image search conditions, you can play back and display only the found images. You can also protect, rate, erase, play a slide show, and apply other operations to filtered images.
Page 314 Filtering Images for Playback Apply the search conditions. Press < 0 > and read the message displayed. Select [OK]. The search condition is specified. Display the found images. Press the < 3 > button. Only the images that match the set conditions (filtered) will be played back.
Page 315: Magnifying Images
u Magnifying Images You can magnify your captured images. Magnify the image. During image playback, press the button. The magnified view will appear. The magnified area position (1) and [ 6u ] will be displayed on the lower right of the screen.
Page 316 Magnifying Images Setting the Initial Magnification Ratio and Position If you select [ 3 3: Magnificatn (apx)], you can set the initial magnification ratio and position for the magnified view. 1x (no magnification) The image is not magnified. The magnified view will start with the single-image display.
Page 317: Rotating Images
b Rotating Images You can use this feature to rotate the displayed image to the desired orientation. Select [ 3 1: Rotate image]. Select an image. Press the < Y > < Z > keys to select the image to be rotated. Rotate the image.
Page 318: K Protecting Images
K Protecting Images You can protect important images from being accidentally erased. Protecting a Single Image Select [ 3 1: Protect images]. Select [Select images]. Select an image. Press the < Y > < Z > keys to select the image to be protected. Protect the image.
Page 319 Protecting Images Specifying the Range of Images to be Protected While looking at the images in the index display, you can specify the first and last images for a range to protect all the specified images at once. Select [Select range]. Select [Select range] in [ 3 1: Protect images].
Page 320 Protecting Images Protecting All Images in a Folder or on a Card You can protect all the images in a folder or on a card at once. When you select [All images in folder] or [All images on card] in [ 3 1: Protect images], all the images in the folder or on the card will be protected.
Page 321: Setting Ratings
p Setting Ratings You can rate images on a scale of 1–5 ( l / m / n / o / p ). This function is called rating. Rating a Single Image Select [ 3 2: Rating]. Select [Select images]. Select the image to be rated.
Page 322 Setting Ratings Rating by Specifying the Range While looking at the images in the index display, you can specify the first and last images for a range to rate all the specified images at once. Select [Select range]. Select [Select range] in [ 3 2: Rating].
Page 323 Setting Ratings Rating All Images in a Folder or on a Card You can rate all the images in a folder or on a card at once. Under [ 3 2: Rating], when you select [All images in folder] or [All images on card], all the images in the folder or on the card will be rated.
Page 324: Enjoying Movies
k Enjoying Movies You can play back and enjoy the captured movies mainly in the following three ways. Playback on a Television (p.333) By connecting the camera to a television with an HDMI cable, you can play back the captured still photos and movies on the television.
Page 325: Playing Back Movies
k Playing Back Movies Play back the image. Press the < x > button. Select a movie. Press the < Y > < Z > keys to select the movie to be played back. In the single-image display, the < s1 > icon displayed on the upper left indicates a movie.
Page 326 Playing Back Movies Movie Playback Panel Item Playback Operations 7 Play Pressing < 0 > toggles between playback and stop. Adjusts the slow motion speed by turning the < 5 > 8 Slow motion dial. The slow motion speed is indicated on the upper right of the screen.
Page 327: Editing A Movie's First And Last Scenes
X Editing a Movie’s First and Last Scenes You can edit out the first and last scenes of a movie in approx. 1-sec. increments. Pause movie playback. The movie playback panel will appear. On the movie playback panel, select [ X ]. Specify the part to be edited out.
Page 328 Editing a Movie’s First and Last Scenes Save the edited movie. Select [ W ], then press < 0 >. The save screen will appear. To save it as a new movie, select [New file]. To save it and overwrite the original movie file, select [Overwrite], then press <...
Page 329: I Grabbing A Frame From 4K Movies Or 4K Time-Lapse Movies
I Grabbing a Frame from 4K Movies or 4K Time-Lapse Movies From 4K movies or 4K time-lapse movies, you can select individual frames to save as approx. 8.3-megapixel (3840×2160) JPEG still images. This function is called “Frame Grab (4K frame capture)”. Play back the image.
Page 330 Grabbing a Frame from 4K Movies or 4K Time-Lapse Movies Save the frame. Select [OK] to save the current frame as a JPEG still image. Select the image to display. Check the destination folder and image file number. Select [View original movie] or [View extracted still image].
Page 331: Slide Show (Auto Playback)
Slide Show (Auto Playback) You can play back the images on the card as an automatic slide show. Specify the images to be played back. To play back all the images on the card, go to step 2. If you want to specify the images to be played back in the slide show, filter the images with [ 3 2: Set image search conditions] (p.313).
Page 332 Slide Show (Auto Playback) Start the slide show. Select [Start], then press < 0 >. After [Loading image...] is displayed, the slide show will start. Exit the slide show. To exit the slide show and return to the setting screen, press the < M > button.
Page 333: Viewing Images On A Television
Viewing Images on a Television By connecting the camera to a television with an HDMI cable, you can play back the captured still photos and movies on the television. Using the HDMI Cable HTC-100 (sold separately) is recommended. If the image does not appear on the TV screen, check if the [ 5 3: Video system] is correctly set to [For NTSC] or [For PAL] (depending on the video system of your television).
Page 334 Viewing Images on a Television Adjust movie sound volume with the television. The sound volume cannot be adjusted with the camera. Before connecting or disconnecting the cable between the camera and television, turn off the camera and television. Depending on the television, part of the image displayed may be cut off. Do not connect any other device’s output to the camera’s <...
Page 335: L Erasing Images
L Erasing Images You can either select and erase unnecessary images one by one or erase them in one batch. Protected images (p.318) will not be erased. Once an image is erased, it cannot be recovered. Make sure you no longer need the image before erasing it.
Page 336 Erasing Images Checkmarking [ X ] Images to Be Erased in a Batch By adding checkmarks to the images to be erased, you can erase all those images at once. Select [ 3 1: Erase images]. Select [Select and erase images]. Select an image.
Page 337 Erasing Images Specifying the Range of Images to Be Erased While looking at the images in the index display, you can specify the first and last images for a range to erase all the specified images at once. Select [Select range]. Select [Select range] in [ 3 1: Erase images].
Page 338 Erasing Images Erasing All Images in a Folder or on a Card You can erase all the images in a folder or on a card at once. When [ 3 1: Erase images] is set to [All images in folder] or [All images on card], all the images in the folder or on the card will be erased.
Page 339: R Processing Raw Images With The Camera
R Processing RAW Images with the Camera N You can process 1 or F images with the camera and save them as JPEG images. As the RAW image itself does not change, you can apply different processing conditions to create any number of JPEG images from it.
Page 340 Processing RAW Images with the Camera Set the desired processing conditions. [Use shot settings] Images are processed using image settings at the time of capture. [Customize RAW processing] Press the < W > < X > < Y > < Z > keys to select an item.
Page 341 Processing RAW Images with the Camera Select the image to display. Select [Original image] or [Processed img.]. The selected image will be displayed. Magnified View You can magnify images displayed for [Customize RAW processing] by pressing the button. Magnification varies depending on the [Image quality] setting.
Page 342 Processing RAW Images with the Camera RAW Image Processing Options ] Brightness adjustment You can adjust the image brightness up to ±1 stop in 1/3-stop increments. ] White balance (p.97) You can select the white balance. If you select [ Q ], you can select [Auto: Ambience priority] or [Auto: White priority].
Page 343 Processing RAW Images with the Camera ] Color space (p.117) You can select either sRGB or Adobe RGB. Since the camera screen is not compatible with Adobe RGB, the difference in the image will hardly be perceptible when either color space is set. ] Lens aberration correction ] Peripheral illumination correction (p.111)
Page 344 Processing RAW Images with the Camera ] Chromatic aberration correction (p.113) Chromatic aberrations (color fringing along the subject’s outline) due to the lens characteristics can be corrected. If [Enable] is set, the corrected image will be displayed. If the effect is difficult to discern, magnify the image (p.341).
Page 345: S Resizing Jpeg Images
S Resizing JPEG Images You can resize a JPEG image to make the pixel count lower and save it as a new image. Resizing an image is possible only with JPEG 3 , 4 , and a images. JPEG b and RAW images cannot be resized. Select [ 3 2: Resize].
Page 346: N Cropping Jpeg Images
N Cropping JPEG Images You can crop a captured JPEG image and save it as another image. Cropping an image is possible only with JPEG images. Images shot in RAW cannot be cropped. Select [ x 2: Cropping]. Select an image. Press the <...
Page 347 Cropping JPEG Images Moving the Cropping Frame Press the < V > cross keys to move the frame vertically or horizontally. Move the cropping frame until it covers the desired image area. Correcting the Tilt You can correct image tilt by ±10°. Turn the < 5 > dial to select <...
Page 348: Transferring Images To A Computer/Ftp Server
(p.37) and insert the plug in the digital terminal. Insert the other end of the cable into the computer’s USB terminal (Type-C). As an interface cable, use either the included cable or a genuine Canon cable.
Page 349 Transferring Images to a Computer/FTP Server Set the power switch to < 1 >. When a message to select a program is displayed on the computer, select [EOS Utility]. The EOS Utility screen is displayed on the computer. After the EOS Utility screen appears, do not operate EOS Utility. [Direct transfer] in step 6 on page 351 is not displayed unless the main EOS Utility screen is displayed, which will prevent image transfer to the computer.
Page 350 Transferring Images to a Computer/FTP Server Selecting Images to Transfer Selecting Images Select [ x 1: Image transfer]. Select [Image sel./transfer]. Select a transfer method. Select [Direct transfer] for image transfer to a computer. Select [Sel.Image]. Select the images to transfer. Press the <...
Page 351 Transferring Images to a Computer/FTP Server Transfer the image. Confirm that the main EOS Utility screen is displayed on the computer. Select [Direct transfer], then press < 0 >. Select [OK] on the confirmation dialog to transfer the images to the computer.
Page 352 Transferring Images to a Computer/FTP Server In a Folder Selecting [Folder images not transfer’d] selects all unsent images in the folder. Selecting [Folder images failed transf.] selects all images in the folder for which transfer failed. Selecting [Clear folder transf. history] clears the transfer history of images in the folder.
Page 353: W Digital Print Order Format (Dpof)
W Digital Print Order Format (DPOF) DPOF (Digital Print Order Format) enables you to print images recorded on the card according to your printing instructions such as the image selection, quantity to print, etc. You can print multiple images in one batch or create a print order for a photofinisher.
Page 354 Digital Print Order Format (DPOF) Exit the setting. Press the < M > button. Next, select [Sel.Image] or [Multiple] to specify the images to be printed. RAW images or movies cannot be specified for printing. If you print an image with a large image size using the [Index] or [Both] setting (p.353), the index print may not be printed with certain printers.
Page 355 Digital Print Order Format (DPOF) Specifying Images for Printing Selecting Images Select and specify the images one by one. Press the < M > button to save the print order to the card. Standard / Both Press < 0 > to print a copy of the displayed image.
Page 356 Digital Print Order Format (DPOF) All Images in a Folder Select [Mark all in folder] and select the folder. A print order for one copy of all the images in the folder will be specified. If you select [Clear all in folder] and select the folder, the print order for all the images in the folder will be canceled.
Page 357: Specifying Images For A Photobook
p Specifying Images for a Photobook You can specify up to 998 images to be printed in a photobook. When you use EOS Utility (EOS software) to import images to a computer, the specified images for a photobook will be copied to a dedicated folder.
Page 358 Specifying Images for a Photobook Specifying the Image Range for a Photobook While looking at the images in the index display, you can specify the range (start point to end point) of images to be specified for a photobook at once. Select [Multiple].
Page 359 Specifying Images for a Photobook Specifying All Images in a Folder or on a Card You can specify all the images in a folder or on a card at once for a photobook. Under [ x 1: Photobook Set-up], you can set [Multiple] to [All images in folder] or [All images on card] to specify all the images in the folder or on the card for a photobook.
Page 361: Set-Up
Set-up This chapter describes menu settings on the set-up ([ 5 ]) tab. A M icon to the right of a page title indicates that the function is available only in [ t ], [ d ], [ s ], [ f ], [ a ], or [BULB] mode.
Page 362: Tab Menus: Set-Up
Tab Menus: Set-up Set-up 1 p.365 p.367 p.370 p.372 p.373 Set-up 2 p.376 p.377 p.378 p.379 p.380 p.383 Set-up 3 p.384 p.385 p.386 p.387 p.391 p.395 p.396...
Page 363 Tab Menus: Set-up Set-up 4 p.397 p.402 p.402 p.403 p.406 Set-up 5 p.407 p.411 Set-up 6 p.416 p.417 p.419 p.420 p.422 p.422 p.422 (not shown in movie mode)
Page 364 Tab Menus: Set-up When you are shooting movies, the following screen is displayed for [ 5 4]. p.397 p.402 p.403 p.404 p.406 In [ A ] and [ y ] modes, the following screen is displayed for [ 5 6]. p.416 p.422...
Page 365: Creating And Selecting A Folder
Creating and Selecting a Folder You can freely create and select the folder where the captured images are to be saved. Creating a Folder Select [ 5 1: Select folder]. Select [Create folder]. Select [OK].
Page 366 Creating and Selecting a Folder Selecting a Folder Select a folder on the folder selection screen. Captured images are stored in your selected folder. (1) Number of images in folder (2) Lowest file number (3) Folder name (4) Highest file number Folders A folder can contain up to 9999 images (file number 0001–9999).
Page 367: File Numbering Methods
File Numbering Methods The captured images saved in a folder are BE3B0001.JPG assigned a file number from 0001 to 9999. (Example) You can change how the image files are File number numbered. Select [ 5 1: File numbering]. Set the item. Select [Numbering].
Page 368 File Numbering Methods Continuous When you wish to continue the file numbering sequence even after the card is replaced or a new folder is created. Even after you replace the card or create a new folder, the file numbering continues in sequence up to 9999. This is useful when you want to save images numbered anywhere between 0001 to 9999 on multiple cards or in multiple folders into one folder on a computer.
Page 369 File Numbering Methods Auto Reset When you wish to restart the file numbering from 0001 each time the card is replaced or a new folder is created. When you replace the card or create a folder, the file numbering restarts from 0001 for the new images saved. This is useful if you want to organize images by cards or folders.
Page 370: Renaming Files
Renaming Files File names consist of four alphanumeric characters followed by a four-digit image BE3B0001.JPG (Example) number (p.367) and the file extension. You can change the first four characters. Registering/Changing File Names Select [ 5 1: File name]. Select [Change User setting*]. [User setting1] You can register four characters of your choice.
Page 371 Renaming Files Use the < V > cross keys or < 5 > dial to select a character, then press < 0 > to enter it. By selecting [ ], you can change the input mode. Exit the setting. Press the < M > button, then press [OK].
Page 372: Setting The Auto Rotation Of Vertical Images
Setting the Auto Rotation of Vertical Images You can change the auto rotation setting that straightens images shot in vertical orientation when they are displayed. Select [ 5 1: Auto rotate]. Select an item. On zD Automatically rotates images for display on both the camera and computers.
Page 373: Formatting The Card
Formatting the Card If the card is new or was previously formatted (initialized) by another camera or computer, format the card with this camera. When the card is formatted, all images and data on the card will be erased. Even protected images will be erased, so make sure there is nothing you need to keep.
Page 374 Formatting the Card Format the card in the following cases: The card is new. The card was formatted by a different camera or a computer. The card is full of images or data. A card-related error is displayed (p.607). Low-Level Formatting Perform low-level formatting if the card’s writing or reading speed seems slow or if you want to totally erase the data on the card.
Page 375 Formatting the Card It may not be possible to use SDXC cards formatted with this camera in other cameras. Also note that exFAT-formatted cards may not be recognized by some computer operating systems or card readers. Formatting or erasing data on a card does not completely erase the data. Be aware of this when selling or discarding the card.
Page 376: Setting Eco Mode
Setting Eco Mode Enables you to conserve battery power in shooting mode. When the camera is not in use, the screen darkens to reduce battery consumption. Select [ 5 2: Eco mode]. Select [On]. The screen darkens when the camera is not used for approximately two seconds.
Page 377: Setting Power-Saving Features
Setting Power-Saving Features You can adjust the timing of when the screen, camera, and viewfinder turn off automatically (Display off, Auto power off, and Viewfinder off). Select [ 5 2 : Power saving]. Select an item. Even when [Auto power off] is set to [Disable], the screen will turn off after the time set in [Display off].
Page 378: Adjusting The Screen Brightness
Adjusting the Screen Brightness Screen and viewfinder brightness can be adjusted separately. Select [ 5 2: Disp. brightness]. Make the adjustment. Referring to the gray chart, press the < Y > < Z > keys to adjust the brightness, then press < 0 >. When adjusting viewfinder brightness, look through the viewfinder as you set To check the image’s exposure, referring to the histogram (p.307) is...
Page 379: Adjusting The Screen Color Tone
Adjusting the Screen Color Tone Screen and viewfinder color tone can be adjusted separately. Select [ 5 2: Disp. color tone]. Make the adjustment. Press the < W > < X > keys or turn the < 5 > dial to select an item, then press <...
Page 380: Setting The Date, Time, And Time Zone
Setting the Date, Time, and Time Zone When you turn on the power for the first time or if the date/time/zone have been reset, follow the steps below to set the time zone first. By setting the time zone first, you can simply adjust this setting as needed in the future and the date/time will be updated to match it.
Page 381 Setting the Date, Time, and Time Zone Press the < Y > < Z > keys to select a [Time difference] item (+/-/hour/ minute), then press < 0 >. Press the < W > < X > keys to set it, then press <...
Page 382 Setting the Date, Time, and Time Zone The date, time, and time zone settings may be reset when the camera is stored without the battery, when its battery becomes exhausted, or when it is exposed to below freezing temperatures for a prolonged period. If this happens, set them once again.
Page 383: Setting The Interface Language
Setting the Interface Language Select [ 5 2: Language K ]. Set the desired language.
Page 384: Setting The Video System
Setting the Video System Set the video system of any television used for display. This setting determines the frame rates available when you shoot movies. Select [ 5 3: Video system]. Select an item. NTSC For areas where the TV system is NTSC (North America, Japan, South Korea, Mexico, etc.).
Page 385: Setting The Touch Control Response
Setting the Touch Control Response Select [ 5 3: Touch control]. Select an item. [Standard] is the normal setting. [Sensitive] provides a more reactive touch-screen panel response than [Standard]. To disable touch operations, select [Disable]. Cautions for Touch Control Operations Since the screen is not pressure sensitive, do not use any sharp objects, such as your fingernail or a ballpoint pen, for touch operations.
Page 386: Disabling Beeps For Camera Operations
Disabling Beeps for Camera Operations You can disable beeping when subjects are in focus or for other operations. Select [ 5 3: Beep]. Select an item. Touch The beeper will be silent only for touch operations. Disable Disables beeping when subjects are in focus, when you shoot with the self-timer, and when you use touch operations.
Page 387: Checking The Battery Information
Using a genuine Canon Battery Pack LP-E6N/LP-E6 is recommended. If you use batteries that are not genuine Canon products, the camera’s full performance may not be attained or malfunction may result. The shutter count is the number of still photos taken. (Movie shooting is not counted.)
Page 388 Checking the Battery Information Registering Batteries to the Camera You can register up to six LP-E6N/LP-E6 batteries to the camera. To register multiple batteries to the camera, follow the procedure below for each battery. Press the button. With the battery info.
Page 389 Checking the Battery Information Labeling Batteries with Serial Numbers It is convenient to label registered LP-E6N/LP-E6 battery packs with their serial numbers, using commercially available labels. On a label approx. 25×15 mm, write the serial number (1). Apply the label. Set the power switch to <...
Page 390 Checking the Battery Information Checking the Remaining Capacity of a Registered Battery You can check the remaining capacity of batteries not currently in use, as well as their last date of use. Look for the serial number. Refer to the battery’s serial number label and look for the battery’s serial number (1) on the battery history screen.
Page 391: Sensor Cleaning
f Sensor Cleaning Self-cleaning of the front of the sensor is performed whenever you set the power switch to < 2 >. You can also activate sensor cleaning manually. Activating Immediate Cleaning Select [ 5 3: Sensor cleaning]. Select [Clean now f ]. Select [OK] on the confirmation dialog.
Page 392 Sensor Cleaning Setting Auto Cleaning Select [Auto cleaning f ]. Select an item. Press the < Y > < Z > keys to select an item, then press < 0 >. For best results, clean with the camera in a stable position on a desk or other flat surface.
Page 393 Dust that could not be removed by automatic cleaning can be removed manually with a commercially available blower or similar tool. The image sensor is extremely delicate. If the sensor needs to be cleaned directly, having it done by a Canon Service Center is recommended. Select [Clean manually].
Page 394 If the battery level becomes low while cleaning the sensor, the beeper will sound as a warning. Stop cleaning the sensor. If a smudge that cannot be removed with a blower remains, having the sensor cleaned by a Canon Service Center is recommended.
Page 395: Setting The Hdmi Output Resolution
Setting the HDMI Output Resolution Set the image output resolution used when the camera is connected to a television or external recording device with an HDMI cable. Select [ 5 3: HDMI resolution]. Select an item. Auto The images will automatically be displayed at the optimum resolution matching the connected television.
Page 396: Raw Playback On An Hdr Tv
RAW Playback on an HDR TV You can view RAW images in HDR by connecting the camera to an HDR TV. Select [ 5 3: HDMI HDR output]. Select [On]. Image operations such as RAW processing are not available during HDR display.
Page 397: Customizing Information Displayed When Shooting
Customizing Information Displayed When Shooting You can customize the details and screens of information shown on the camera or in viewfinder when you shoot. Select [ 5 4: Shooting info. disp.]. Customizing Information on the Screen Select [Screen info. settings]. Select screens.
Page 398 Customizing Information Displayed When Shooting Customizing Information in the Viewfinder Select [VF info/toggle settings]. Select screens. Press the < W > < X > keys to select screens of information to show in the viewfinder. For screens you prefer not to display, press <...
Page 399 Customizing Information Displayed When Shooting Vertical Viewfinder Display You can select how viewfinder information is displayed when you are shooting still photos vertically. Select [VF vertical display]. Select an item. Information is automatically rotated, making it easier to read. Information is not automatically rotated.
Page 400 Customizing Information Displayed When Shooting Setting the Histogram You can select the content and display size of the histogram. Select [Histogram disp]. Select an item. Select the content ([Brightness] or [RGB]) and display size ([Large] or [Small]). Press the < M > button to confirm the setting.
Page 401 Customizing Information Displayed When Shooting Clearing Settings You can restore [Shooting info. disp.] defaults. Select [Reset]. Select [OK].
Page 402: Setting A Priority For Shooting Display Performance
Setting a Priority for Shooting Display Performance You can select the performance parameter to prioritize in shooting screen display for still photos. Select [ 5 4: Disp. performance]. Select an item. Setting the Viewfinder Display Format You can select the viewfinder display format. Select [ 5 4: VF display format].
Page 403: Setting The Display Mode
Setting the Display Mode You can select the display mode for shooting screens. Select [ 5 4: Display settings]. Select an item. Auto Normally use the screen for display, but switch to the viewfinder when you look through it. Manual You can restrict display to the screen or viewfinder.
Page 404: Customizing Shutter Button Functionality
Customizing Shutter Button Functionality You can set the functions performed by pressing the shutter button halfway or completely during movie shooting. Select [ 5 4: V btn function]. Select an item. Half-press Specify whether pressing the shutter button halfway starts metering, metering and Movie Servo AF, or metering and One-Shot AF.
Page 405: Help
1 Help When [ z Help] is displayed below a menu, you can display a description about the feature by pressing the button. Press it again to exit Help display. To scroll the screen when a scrollbar (1) appears on the right, press the <...
Page 406 Help Help Display Text Size You can change the text size for the Help display. Select [ 5 4: Help text size]. Select an item. Example: [ z 5: High ISO speed NR] Text size: Small Text size: Standard...
Page 407: Setting Wireless Features
Setting Wireless Features You can connect the camera to a smartphone or computer wirelessly and send your shots or control the camera remotely. Select [ 5 5: Wireless communication settings]. Set the item. For details, see Chapter 6, “Wi-Fi (Wireless Communication) Functions”.
Page 408 Setting Wireless Features Shooting with a Remote Control By pairing the camera via Bluetooth with Wireless Remote Control BR- E1 (sold separately, supporting Bluetooth low energy technology), you can shoot remotely up to approx. 5 m/16.4 ft. from the camera. Pairing To use BR-E1, you must first pair (connect and register) the camera and remote control.
Page 409 Setting Wireless Features Select [Pairing]. Select [Pairing]. Press and hold the < > button and < > button on the BR-E1 simultaneously for 3 sec. or more. Pairing now begins. When pairing is complete, BR-E1 is registered on the camera. When shooting still Set up the camera for remote shooting.
Page 410 Setting Wireless Features Canceling the Pairing Before pairing with a different BR-E1, clear the information about the connected remote control. Select [ 5 5: Wireless communication settings]. Select [Bluetooth function]. Select [Check/clear connection info]. Press the button. Clear the connection information.
Page 411: Geotagging Images
Make sure the GP-E2 firmware is updated to Ver. 2.0.0 or later. Firmware updating requires an interface cable. For updating instructions, visit the Canon website. The cable included with the GP-E2 cannot be used to connect the camera to the GP-E2.
Page 412 Geotagging Images Using a Smartphone The dedicated application Camera Connect (free of charge) must be installed on the smartphone. For details on installing Camera Connect, see page 427. Specifying the smartphone as the GPS device On the smartphone, activate location services. Establish a Bluetooth connection.
Page 413 Geotagging Images Select [Smartphone]. Select [Smartphone] in [Select GPS device]. Location information can now be acquired from the smartphone. To check acquired geotag information (latitude, longitude, elevation, and Coordinated Universal Time (UTC)), select [GPS information display] on the [GPS device settings] screen. Take the picture.
Page 414 Geotagging Images GPS connection display You can check the status of smartphone location information acquisition on the screens for still photo or movie shooting (p.619 and p.621, respectively). ● Gray: Location services are off ● Blinking: Location information cannot be acquired ●...
Page 415 Geotagging Images The smartphone can acquire location information only while it is paired with the camera via Bluetooth. Direction information is not acquired. Acquired location information may not be accurate, depending on traveling conditions or smartphone status. It may take some time to acquire location information from the smartphone after you turn the camera on.
Page 416: R Setting The Multi-Function Lock
R Setting the Multi-Function Lock Specify camera controls to lock when the Multi-function lock is enabled. This can help prevent accidentally changing settings. Select [ 5 6: Multi function lock]. Select camera controls to lock. Press < 0 > to add a checkmark [ X ].
Page 417: W : Registering Custom Shooting Modes
w : Registering Custom Shooting Modes N You can register current camera settings, such as shooting, menu, and Custom Function settings, as Custom shooting modes assigned to < w > to < y > modes. You can register different functions to use when shooting still photos or movies.
Page 418 Registering Custom Shooting Modes My Menu settings will not be registered under Custom shooting modes. You can also change shooting and menu settings in Custom shooting modes.
Page 419: Reverting The Camera To The Default Settings
Reverting the Camera to the Default Settings N The camera’s settings for shooting functions and menu functions can be reverted to their defaults. Select [ 5 6: Clear all camera settings]. Select [OK]. For how to clear all the Custom Function settings, see page 554.
Page 420: Setting Copyright Information
Setting Copyright Information N When you set the copyright information, it will be recorded to the image as Exif information. Select [ 5 6: Copyright information]. Select an item. Enter text. Use the < V > cross keys or < 5 > dial to select a character, then press <...
Page 421 Setting Copyright Information Checking the Copyright Information When you select [Display copyright info.] in step 2, you can check the [Author] and [Copyright] information that you entered. Deleting the Copyright Information When you select [Delete copyright information] in step 2, you can delete the [Author] and [Copyright] information.
Page 422: Checking Other Information
Checking Other Information Downloading instruction manuals To download instruction manuals, select [ 5 6: Manual/software URL] and scan the displayed QR code with a smartphone. Note that scanning QR codes requires an app. Displaying certification logos M Select [ 5 6: Certification Logo Display] to display some of the logos of the camera’s certifications.
Page 423: Wi-Fi (Wireless Communication) Functions
Wi-Fi (Wireless Communication) Functions ® This chapter describes how to send images via Wi-Fi from the camera to a variety of compatible devices, and how to use Web services.
Page 424: What You Can Do Via Wi-Fi (Wireless Communication) Functions
Important Note that Canon cannot be held liable for any loss or damage from erroneous wireless communication settings when using the camera. In addition, Canon cannot be held liable for any other loss or damage caused by use of the camera.
Page 425 LAN) via Wi-Fi to print images. (4) R Send images to a Web service (p.481) Share images with friends or family on social media or the CANON iMAGE GATEWAY online photo service for Canon customers after you complete member registration (free of charge).
Page 426 What You Can Do via Wi-Fi (Wireless Communication) Functions ® Bluetooth Features By pairing the camera with a smartphone compatible with Bluetooth low energy technology (hereafter, “Bluetooth”), you can: ● Establish a Wi-Fi connection from either the camera or smartphone, by itself (p.448, 511) ●...
Page 427: Connecting To A Smartphone Via Wi-Fi
Connecting to a Smartphone via Wi-Fi This section describes how to directly connect the camera to a smartphone via Wi-Fi. Connecting to a smartphone via Wi-Fi enables you to perform the following: ● View images stored in the camera on a smartphone or save viewed images to a smartphone.
Page 428 Connecting to a Smartphone via Wi-Fi Use the latest version of the smartphone OS. Camera Connect can be installed from Google Play or App Store. Google Play or App Store can also be accessed using the QR codes that appear when the camera is paired or connected via Wi-Fi to a smartphone.
Page 429 Connecting to a Smartphone via Wi-Fi Connecting to a Bluetooth-compatible Smartphone via Wi-Fi Steps on the Camera (1) Select [ 5 5: Wireless communication settings]. Select [Wi-Fi settings]. Select [Wi-Fi]. Select [Enable]. After the [Wi-Fi settings] screen appears, press the < M > button to return to the [Wireless communication settings] screen.
Page 430 Connecting to a Smartphone via Wi-Fi Select [Bluetooth function]. Select [Bluetooth function]. Select [Smartphone]. Register [Nickname]. When using the displayed nickname, press the < M > button. You can change the nickname as needed (p.514).
Page 431 Connecting to a Smartphone via Wi-Fi Select [OK]. Select [Pairing]. Select an item. If Camera Connect is already installed, select [Do not display]. If Camera Connect is not installed, select [Android] or [iOS], scan the displayed QR code with the smartphone to access Google Play or App Store and install Camera Connect.
Page 432 Connecting to a Smartphone via Wi-Fi Steps on the Smartphone (1) Enable the Bluetooth function. Start Camera Connect. Select the camera to pair with. If you are using an Android smartphone, go to step 16. Tap on [Pair] (iOS only).
Page 433 Connecting to a Smartphone via Wi-Fi Steps on the Camera (2) Select [OK]. Press < 0 >. Pairing is now complete, and the camera is connected to the smartphone via Bluetooth. A Bluetooth icon appears on the main Camera Connect screen. Pairing or Bluetooth connection is not possible if the camera is connected to a computer or another device with an interface cable.
Page 434 Connecting to a Smartphone via Wi-Fi Steps on the Smartphone (2) Select a Camera Connect function. In iOS, select [Join] when a message is displayed to confirm camera connection. For the Camera Connect functions, see page 444. When a Wi-Fi connection is established, the screen for the selected function will appear.
Page 435 Connecting to a Smartphone via Wi-Fi For how to terminate the Wi-Fi connection, see “Terminating the Wi- Fi Connection” (p.457). Terminating the Wi-Fi connection will switch the camera to the Bluetooth connection. To reconnect via Wi-Fi, see “Reconnecting via Wi-Fi” (p.509). [ q Wi-Fi on] Screen Disconnect,exit Terminates the Wi-Fi connection.
Page 436 Connecting to a Smartphone via Wi-Fi [Bluetooth function] Screen On the [Bluetooth function] screen, you can change or check the Bluetooth function settings. Bluetooth function Select the device to pair with the camera. If you will not use the Bluetooth function, select [Disable].
Page 437 Connecting to a Smartphone via Wi-Fi Stay conn. if off Selecting [Enable] lets you view images on the camera and control it in other ways by connecting via Wi-Fi even if the camera is off. For details, see “Establishing a Wi-Fi Connection When the Camera Is Off”.
Page 438 Connecting to a Smartphone via Wi-Fi Establishing a Wi-Fi Connection When the Camera Is Off Start Camera Connect. Start Camera Connect on a smartphone paired with the camera via Bluetooth. Select [Images on camera]. In the Camera Connect menu, tap on [Images on camera].
Page 439 Connecting to a Smartphone via Wi-Fi Removing a Paired Device’s Registration To pair the camera with a different smartphone, clear the paired device’s registration on the [Bluetooth function] screen (p.436). Steps on the Camera Select [Check/clear connection info]. Press the button. Clear the connection information.
Page 440 Connecting to a Smartphone via Wi-Fi Connecting to a Smartphone via Wi-Fi from the [Wi-Fi function] Menu Steps on the Camera (1) Set Wi-Fi settings to [Enable]. See steps 1–4 on page 429. Select [Wi-Fi function]. Select [Wi-Fi function] on the [Wireless communication settings] screen.
Page 441 Connecting to a Smartphone via Wi-Fi Select an item. If Camera Connect is already installed, select [Do not display]. If Camera Connect is not installed, select [Android] or [iOS] on the screen on the left, scan the displayed QR code with the smartphone, then access Google Play or App Store and install Camera Connect.
Page 442 Connecting to a Smartphone via Wi-Fi Steps on the Smartphone Smartphone’s screen Operate the smartphone to establish a Wi-Fi connection. (sample) Activate the smartphone’s Wi- Fi function, then select the SSID (network name) checked in step 7. For the password, enter the password checked in step 7.
Page 443 Connecting to a Smartphone via Wi-Fi The main window of Camera Connect will be displayed on the smartphone. The Wi-Fi connection to a smartphone is now complete. Operate the camera using Camera Connect. See page 444. For how to terminate the Wi-Fi connection, see “Terminating the Wi- Fi Connection”...
Page 444 Connecting to a Smartphone via Wi-Fi Operating the Camera Using a Smartphone The main functions of Camera Connect are described below. Images on camera Images stored in the camera can be viewed. Images stored in the camera can be saved on a smartphone. Operations such as deletion can be performed on images stored in the camera.
Page 445 Connecting to a Smartphone via Wi-Fi If the Wi-Fi connection is terminated while recording a movie with remote shooting, the following will occur. • Any movie recording in progress in movie shooting mode will continue. • Any movie recording in progress in still photo shooting mode will end. You cannot use the camera to shoot after using Camera Connect to switch from still photo shooting mode to movie shooting mode.
Page 446 Connecting to a Smartphone via Wi-Fi Sending Images to a Smartphone Automatically as You Shoot Your shots can be sent automatically. Before following these steps, make sure the camera and smartphone are connected via Wi-Fi. Select [ 5 5: Wireless communication settings].
Page 447 Connecting to a Smartphone via Wi-Fi Set [Size to send]. Select the image size, then press < 0 >. Take the picture.
Page 448 Connecting to a Smartphone via Wi-Fi Sending Images to a Smartphone from the Camera You can use the camera to send images to a smartphone paired via Bluetooth (Android devices only) or connected via Wi-Fi. (1) Selecting [Send images to smartphone] to Send Images Select [ 5 5: Wireless communication settings].
Page 449 Connecting to a Smartphone via Wi-Fi (2) Sending Images from the Quick Control Screen During Playback Play back the image. Press the < Q > button. Select [ q ]. If you perform this step while connected via Bluetooth, a message is displayed, and the connection switches to a Wi-Fi connection.
Page 450 Connecting to a Smartphone via Wi-Fi (3) Selecting Sending Options and Sending the Images Sending Images Individually Select an image to send. Press the < Y > < Z > keys or turn the < 5 > dial to select an image to send, then press <...
Page 451 Connecting to a Smartphone via Wi-Fi Sending Multiple Selected Images Press < 0 >. Select [Send selected]. Select images to send. Press the < Y > < Z > keys or turn the < 5 > dial to select an image to send, then press <...
Page 452 Connecting to a Smartphone via Wi-Fi Exit image selection. Select [OK]. Select [Size to send]. Set it as necessary. On the displayed screen, select an image size. Select [Send]. Sending a Specified Range of Images Press < 0 >. Select [Send range].
Page 453 Connecting to a Smartphone via Wi-Fi Specify the range of images. Select the first image (start point), then press < 0 >. Select the last image (end point), then press < 0 >. To cancel the selection, repeat this step. You can press the <...
Page 454 Connecting to a Smartphone via Wi-Fi Sending All Images on the Card Press < 0 >. Select [Send all card]. Select [Size to send]. On the displayed screen, select an image size. Select [Send].
Page 455 Connecting to a Smartphone via Wi-Fi Sending Images that Match the Search Conditions Send all the images that match the search conditions set in [Set image search conditions] at once. For details on [Set image search conditions], see “Filtering Images for Playback”...
Page 456 Connecting to a Smartphone via Wi-Fi Ending Image Transfer Sending Images from the Camera When Paired via Bluetooth (Android) Press the < M > button on the image transfer screen. Select [OK] on the screen at left to end image transfer and the Wi-Fi connection.
Page 457 Connecting to a Smartphone via Wi-Fi During the image transfer operation, a picture cannot be taken even if the camera’s shutter button is pressed. The camera cannot be connected to multiple smartphones via Wi-Fi when it is connected to another device via Wi-Fi. You can cancel the image transfer by selecting [Cancel] during the transfer.
Page 458 Connecting to a Smartphone via Wi-Fi Specifying Viewable Images You can specify images viewable on a smartphone by operating the camera. Images can be specified after the Wi-Fi connection is terminated. Select [Wi-Fi function]. Select [Wi-Fi function] on the [Wireless communication settings] screen.
Page 459 Connecting to a Smartphone via Wi-Fi Select [Viewable imgs]. Select an item. Select [OK] to access the setting screen. [All images] All images stored on the card become viewable. [Images from past days] Specify viewable images on the shooting-date basis. Images shot up to nine days ago can be specified.
Page 460 Connecting to a Smartphone via Wi-Fi [Select by rating] Specify viewable images depending on whether a rating is appended (or not appended) or by the type of rating. Once you select the type of rating, the viewable images are set. [File number range] (Select range) Select the first and last images from...
Page 461: Connecting To A Computer Via Wi-Fi
Connecting to a Computer via Wi-Fi This section describes how to connect the camera to a computer via Wi-Fi and perform camera operations using EOS software or other dedicated software. Install the latest version of EOS software or other dedicated software on the computer before setting up a Wi-Fi connection.
Page 462 Connecting to a Computer via Wi-Fi Select [Register a device for connection]. Check the SSID (network name) and password. Check the SSID (1) and password (2) displayed on the camera screen. In [Wi-Fi settings], if you set [Password] to [None], the password will not be displayed or required.
Page 463 Connecting to a Computer via Wi-Fi Steps on the Camera (2) Select [OK]. The following message is displayed. “******” represents the last six digits of the MAC address of the camera to be connected. Steps on the Computer (2) Start EOS Utility. In EOS Utility, click [Pairing over Wi-Fi/LAN].
Page 464 Connecting to a Computer via Wi-Fi Steps on the Camera (2) Establish a Wi-Fi connection. Select [OK]. [ D Wi-Fi on] Screen Disconnect,exit Terminates the Wi-Fi connection. Confirm set. You can check the settings. Error details When a Wi-Fi connection error occurs, you can check the details of the error.
Page 465 Connecting to a Computer via Wi-Fi If the Wi-Fi connection is terminated while recording a movie with remote shooting, the following will occur. • Any movie recording in progress in movie shooting mode will continue. • Any movie recording in progress in still photo shooting mode will end. Operations using the camera are not possible after you use EOS Utility to switch from still photo shooting mode to movie shooting mode.
Page 466 Connecting to a Computer via Wi-Fi Sending Images to a Computer Automatically With the dedicated software Image Transfer Utility 2, you can send images on the camera to a computer automatically. Steps on the Computer (1) Connect the computer and access point and start Image Transfer Utility 2.
Page 467 Connecting to a Computer via Wi-Fi Select [OK]. Connect to an access point via Wi- Establish a Wi-Fi connection between the camera and the access point connected to the computer. For connection instructions, see “Wi- Fi Connection via Access Points” (p.496).
Page 468 Connecting to a Computer via Wi-Fi Sending Images on the Camera to a Computer Automatically On the [Wi-Fi settings] screen, select [Auto send images to computer]. Select [Image sending options]. Select what to send. If you select [Selected imgs] in [Range to send], specify the images to send on the [Select images to send] screen.
Page 469: Connecting To A Printer Via Wi-Fi
Connecting to a Printer via Wi-Fi This section describes how to print images by directly connecting the camera to a printer via Wi-Fi. For printer operating instructions, refer to the printer user manual. Establishing a Wi-Fi Connection Set Wi-Fi settings to [Enable]. See steps 1–4 on page 429.
Page 470 Connecting to a Printer via Wi-Fi Check the SSID (network name) and password. Check the SSID (1) and password (2) displayed on the camera screen. In [Wi-Fi settings], if you set [Password] to [None], the password will not be displayed or required. For details, see page 533.
Page 471 Connecting to a Printer via Wi-Fi Wi-Fi connection is possible with Wi-Fi printers supporting PictBridge (Wireless LAN). To establish a Wi-Fi connection via an access point, see “Wi-Fi Connection via Access Points” (p.496).
Page 472 Connecting to a Printer via Wi-Fi Printing Images Printing Images Individually Select the image to be printed. Press the < Y > < Z > keys or turn the < 5 > dial to select an image to print, then press < 0 >. You can press the <...
Page 473 Connecting to a Printer via Wi-Fi Printing by Specifying the Options Press < 0 >. Select [Print order]. Set the printing options. For the setting procedures, refer to “Digital Print Order Format (DPOF)” (p.353). If the print order is complete before establishing a Wi-Fi connection, go to step 4.
Page 474 Connecting to a Printer via Wi-Fi Print the image. When [OK] is selected, printing starts. With a Wi-Fi connection to a printer established, a picture cannot be taken even if the camera’s shutter button is pressed. Movies cannot be printed. Before printing, be sure to set the paper size.
Page 475 Connecting to a Printer via Wi-Fi Print Settings The screen display and setting options vary depending on the printer. Also, certain settings may not be available. For details, refer to the printer’s instruction manual. Print setting screen (1) Sets the date or file number imprinting to on or off (p.477). (2) Sets the printing effects (p.477).
Page 476 Connecting to a Printer via Wi-Fi [ Q ] Setting the Paper Size Select the size of the paper in the printer. [ Y ] Setting the Paper Type Select the type of the paper in the printer. [ U ] Setting the Page Layout Select the page layout.
Page 477 Connecting to a Printer via Wi-Fi Setting the Date/File Number Imprinting Select [ I ]. Select what to print. Setting the Printing Effects (Image Optimization) Contents displayed on the screen vary depending on the printer. Select [ E ]. Select printing effects. Option Printing Effect Printing effects differ depending on the printer.
Page 478 Connecting to a Printer via Wi-Fi Setting the Number of Copies Select [ R ]. Select the number of copies to print. The [Default] setting for printing effects and other options are the printer’s own default settings as set by the printer’s manufacturer. Refer to the printer’s instruction manual to find out what the [Default] settings are.
Page 479 Connecting to a Printer via Wi-Fi Cropping the Image Set cropping immediately before printing. Changing other print settings after you crop images may require you to crop the images again. On the print setting screen, select [Cropping]. Set the cropping frame size, position, and aspect ratio. The image area within the cropping frame will be printed.
Page 480 Connecting to a Printer via Wi-Fi Depending on the printer, the cropped image area may not be printed as you specified. The smaller you make the cropping frame, the grainier the picture will look in the print. Handling Printer Errors If printing does not resume after you resolve a printer error (no ink, no paper, etc.) and select [Continue], operate the buttons on the printer.
Page 481: Sending Images To A Web Service
For CANON iMAGE GATEWAY instructions and setting details, refer to the help information for CANON iMAGE GATEWAY. If you also intend to use Web services other than CANON iMAGE GATEWAY, you must have an account with the services you intend to use.
Page 482 Sending Images to a Web Service Registering CANON iMAGE GATEWAY Link the camera and CANON iMAGE GATEWAY by adding CANON iMAGE GATEWAY as a destination Web service on the camera. You will need to enter an email address used on your computer or smartphone.
Page 483 Sending Images to a Web Service Establish a Wi-Fi connection. Go to step 7 on page 498 (PBC mode), step 7 on page 502 (PIN mode), or step 7 on page 505 (manually). Enter your email address. Enter your email address, then select [OK].
Page 484 Access the page in the notification message. Follow the instructions to complete the settings on the camera web link settings page. Steps on the Camera (2) Add CANON iMAGE GATEWAY as a destination. Select [ CANON iMAGE GATEWAY is now added.
Page 485 Registering Other Web Services Steps on the Computer or Smartphone Configure the Web service you want to use. Visit the CANON iMAGE GATEWAY website and access the camera web link settings page. Follow the on-screen instructions to complete settings for Web services you want to use.
Page 486 Sending Images to a Web Service Establishing a Wi-Fi Connection Select [Wi-Fi function]. Select [Wi-Fi function] on the [Wireless communication settings] screen. Select a Web service. If the history (p.509) is displayed, switch the screen with the < Y > < Z > keys.
Page 487 Sending Images to a Web Service Sending Images to a Web Service You can share images with your family and friends by sending images from the camera to a Web service registered on the camera or by sending Web links of the online albums. Sending Images Individually Select an image to send.
Page 488 Sending Images to a Web Service Sending Multiple Selected Images Press < 0 >. Select [Send selected]. Select the images to send. Press the < Y > < Z > keys or turn the < 5 > dial to select an image to send, then press <...
Page 489 Sending Images to a Web Service Select [Size to send]. When YouTube is selected as the destination, [Size to send] is not displayed. On the displayed screen, select an image size. Select [Send]. On the screen after images are sent, select [OK] to end the Wi-Fi connection.
Page 490 Sending Images to a Web Service Sending a Specified Range of Images Specify the range of images to send all the images in the range at once. Press < 0 >. Select [Send range]. Specify the range of images. Select the first image (start point). Select the last image (end point).
Page 491 Sending Images to a Web Service Select [Size to send]. On the displayed screen, select an image size. Select [Send]. On the screen after images are sent, select [OK] to end the Wi-Fi connection. When the [Terms of use] screen is displayed, thoroughly read the message, then select [I Agree].
Page 492 Sending Images to a Web Service Select [Size to send]. Set it as necessary. On the displayed screen, select an image size. Select [Send]. On the screen after images are sent, select [OK] to end the Wi-Fi connection. When the [Terms of use] screen is displayed, thoroughly read the message, then select [I Agree].
Page 493 Sending Images to a Web Service Sending Images that Match the Search Conditions Send all the images that match the search conditions set in [Set image search conditions] at once. For [Set image search conditions], refer to “Filtering Images for Playback”...
Page 494 Sending Images to a Web Service Select [Send]. On the screen after images are sent, select [OK] to end the Wi-Fi connection. When the [Terms of use] screen is displayed, thoroughly read the message, then select [I Agree]. To scroll the screen, use the < W > <...
Page 495 With a Wi-Fi connection to a Web service established, a picture cannot be taken even if the camera’s shutter button is pressed. When sending an image to a Web service other than CANON iMAGE GATEWAY, a send error message may not be displayed even if the image has not been sent to the Web service successfully.
Page 496: Wi-Fi Connection Via Access Points
Wi-Fi Connection via Access Points This section describes how to join a Wi-Fi network via an access point. Checking the Type of Access Point Determine whether the access point for the Wi-Fi connection is compatible with WPS (Wi-Fi Protected Setup), as described in the access point instruction manual or other documentation.
Page 497 Wi-Fi Connection via Access Points Establishing a Wi-Fi Connection with WPS (PBC Mode) First, check the position of the WPS button and how long to press it. It may take approx. one minute to establish a Wi-Fi connection. If multiple access points are active nearby and you cannot establish a Wi-Fi connection, try to establish the connection in [WPS (PIN mode)].
Page 498 Wi-Fi Connection via Access Points Select [Register a device for connection]. When [ q ] (Connect to smartphone) is selected, the screen on the left is displayed. If Camera Connect is already installed, select [Do not display]. Select [Switch network]. Displayed when [ q ], [ D ], or [ l ] is selected.
Page 499 Wi-Fi Connection via Access Points Select [WPS (PBC mode)]. Select [OK]. Connect to the access point via Wi- Press the access point’s WPS button. Select [OK]. Select [Auto setting]. Select [OK] to access the setting screen for the Wi-Fi function. If [Auto setting] results in an error or if you want to specify the settings manually, see page 535.
Page 500 Go to step 9 on page 442. Remote control (EOS Utility)] Go to step 8 on page 463. Print from Wi-Fi printer] Go to step 8 on page 470. Registering CANON iMAGE GATEWAY Go to step 7 on page 483.
Page 501 Wi-Fi Connection via Access Points Establishing a Wi-Fi Connection with WPS (PIN Mode) First, check how to enter a PIN code on the access point. It may take approx. one minute to establish a Wi-Fi connection. Set Wi-Fi settings to [Enable]. See steps 1–4 on page 429.
Page 502 Wi-Fi Connection via Access Points When [ q ] (Connect to smartphone) is selected, the screen on the left is displayed. If Camera Connect is already installed, select [Do not display]. Select [Switch network]. Displayed when [ q ], [ D ], or [ l ] is selected.
Page 503 Wi-Fi Connection via Access Points Specify the PIN code at the access point. At the access point, specify the PIN code displayed on the camera screen. Once you have entered the PIN code, select [OK]. Connect to the access point via Wi- Select [OK].
Page 504 Wi-Fi Connection via Access Points Establishing a Wi-Fi Connection Manually Establish a Wi-Fi connection by selecting the SSID (or ESS-ID) of the access point for a Wi-Fi connection from a list of active access points nearby. Selecting the Access Point Set Wi-Fi settings to [Enable].
Page 505 Wi-Fi Connection via Access Points Select [Switch network]. Displayed when [ q ], [ D ], or [ l ] is selected. Select the access point. Press the < W > < X > keys to select the access point to connect to via Wi- Fi from the list of access points.
Page 506 Wi-Fi Connection via Access Points Entering the Access Point Password Enter the password specified for the access point. For details on the specified password, refer to the access point’s instruction manual. The screens displayed in steps 8 to 9 below vary depending on the authentication and encryption specified for the access point.
Page 507 Wi-Fi Connection via Access Points Setting the IP Address Select [Auto setting]. Select [OK] to access the setting screen for the Wi-Fi function. If [Auto setting] results in an error or if you want to specify the settings manually, see page 535. Specify the settings for the Wi-Fi function (p.500).
Page 508 Wi-Fi Connection via Access Points Send To Screen A screen to select a destination may be displayed depending on the Web service. To register destinations or to specify the settings, you must use a computer. For more information, refer to the EOS Utility Instruction Manual.
Page 509: Reconnecting Via Wi-Fi
Reconnecting via Wi-Fi Follow these steps to reconnect to devices or Web services with registered connection settings. Select [Wi-Fi function]. Select [Wi-Fi function] on the [Wireless communication settings] screen. Select an item. Select the item to connect to via Wi-Fi from the displayed history.
Page 510 Reconnecting via Wi-Fi [ D ] Computer On the computer, start the EOS software. If the computer’s connection destination has been changed, restore the setting to connect via Wi-Fi to the camera or the same access point as the camera. When directly connecting the camera to a computer via Wi-Fi, “_ ...
Page 511 Reconnecting via Wi-Fi Connecting to a Bluetooth-connected Smartphone via Wi-Fi Start Camera Connect. Tap on the Camera Connect icon on the smartphone to start the application. Select a Camera Connect function. Select the Camera Connect function you want to use. A Wi-Fi connection will be automatically established.
Page 512 Reconnecting via Wi-Fi Registering Multiple Connection Settings You can register up to 20 connection settings for the Wi-Fi function. Select [Wi-Fi function]. Select [Wi-Fi function] on the [Wireless communication settings] screen. Select an item. When the screen on the left appears, press the <...
Page 513: Changing Or Deleting Connection Settings
Changing or Deleting Connection Settings Change or delete connection settings saved on the camera. To change or delete the connection settings, terminate the Wi-Fi connection first. Select [Wi-Fi function]. Select [Wi-Fi function] on the [Wireless communication settings] screen. Select an item. When the screen on the left appears, press the <...
Page 514 Displayed when [ q ] (Connect to smartphone) is selected. Settings will appear at the bottom of the screen. Erase connection information You can delete connection settings saved on the camera. For Web services, visit the CANON iMAGE GATEWAY website to delete the connection settings.
Page 515: Clearing Wireless Communication Settings To Default
Clearing Wireless Communication Settings to Default All wireless communication settings can be deleted. By deleting the wireless communication settings, you can prevent their information from being exposed when you lend or give your camera to other people. Select [Clear settings]. Select [OK].
Page 516: View Info Screen
View Info Screen On the [View info] screen, you can check error details and the camera’s MAC address. Select [Wi-Fi function]. Select [Wi-Fi function] on the [Wireless communication settings] screen. Select an item, then press the button. The [View info] screen will appear.
Page 517: Responding To Error Messages
Responding to Error Messages When an error occurs, display the details of the error by following one of the procedures below. Then, eliminate the cause of the error by referring to the examples shown in this chapter. On the [View info] screen, press < 0 > (p.516). Select [Error details] on the [Wi-Fi on] screen.
Page 518 Responding to Error Messages 11: Connection target not found In the case of [ q ], is Camera Connect running? Establish a connection using Camera Connect (p.442). In the case of [ l ], is the power of the printer on? Turn on the printer.
Page 519 Responding to Error Messages 21: No address assigned by DHCP server What to check on the camera On the camera, IP address is set to [Auto setting]. Is this the correct setting? If no DHCP server is used, specify the settings after setting the IP address to [Manual setting] on the camera (p.535).
Page 520 Responding to Error Messages 22: No response from DNS server What to check on the camera On the camera, does the DNS server’s IP address setting match the server’s actual address? Set the IP address to [Manual setting]. Then, on the camera, set the IP address that matches the address of the DNS server used (p.531, 535).
Page 521 Responding to Error Messages 23: Device with same IP address exists on selected network What to check on the camera Do the camera and another device connected via Wi-Fi to the same network have the same IP address? Change the camera’s IP address to avoid using the same address as another device on the network.
Page 522 Responding to Error Messages 61: Selected SSID wireless LAN network not found Are any obstacles blocking the line of sight between the camera and the antenna of the access point? Move the antenna of the access point to a position clearly visible from the point of view of the camera (p.528).
Page 523 Responding to Error Messages 63: Wireless LAN authentication failed Are the camera and the access point set to use the same authentication method? The camera supports the following authentication methods: [Open system], [Shared key], and [WPA/WPA2-PSK] (p.496). Are the camera and the access point set to use the same password for authentication? The setting is case-sensitive, so check upper- and lower-case characters.
Page 524 Responding to Error Messages 65: Wireless LAN connection lost Are any obstacles blocking the line of sight between the camera and the antenna of the access point? Move the antenna of the access point to a position clearly visible from the point of view of the camera (p.528). The Wi-Fi connection was lost for some reason, and the connection cannot be restored.
Page 525 Responding to Error Messages 68: Cannot connect to wireless LAN terminal. Retry from the beginning. Did you hold down the access point’s WPS (Wi-Fi Protected Setup) button for the specified period of time? Hold down the WPS button for the period of time specified in the access point’s instruction manual.
Page 526 Is the network connected? Check the connection status of the network. 126: Could not connect to server CANON iMAGE GATEWAY is under maintenance or load is concentrated temporarily. Try connecting to the Web service again later. 127: An error has occurred A problem other than error code number 121 to 126 occurred while the camera is connected to the Web service.
Page 527 Responding to Error Messages 151: Transmission canceled Automatic image transfer to the computer was somehow interrupted. To resume automatic image transfer, set the camera’s power switch to < 2 >, and then set it to < 1 >. 152: Card’s write protect switch is set to lock Is the card’s write-protect switch set to the locked position? Slide the card’s write-protect switch to the writing position.
Page 528: Wireless Communication Function Notes
Wireless Communication Function Notes If the transmission rate drops, the connection is lost, or other problems occur when using the wireless communication functions, try the following corrective actions. Distance Between the Camera and the Smartphone If the camera is too far from the smartphone, a Wi-Fi connection may not be established even when Bluetooth connection is possible.
Page 529 Wireless Communication Function Notes Cautions for Using Multiple Cameras When connecting multiple cameras to one access point via Wi-Fi, make sure the cameras’ IP addresses are different. When multiple cameras are connected to one access point via Wi- Fi, the transmission rate drops. When there are multiple IEEE 802.11b/g/n (2.4 GHz band) access points, leave a gap of five channels between each Wi-Fi channel to reduce radio wave interference.
Page 530: Security
Security If security settings have not been properly set, the following problems may occur. Transmission monitoring Third parties with malicious intent may monitor the Wi-Fi transmissions and attempt to acquire the data you are sending. Unauthorized network access Third parties with malicious intent may gain unauthorized access to the network you are using to steal, modify, or destroy information.
Page 531: Checking Network Settings
Checking Network Settings Windows Open the Windows [Command Prompt], then type ipconfig/all and Enter press the < > key. In addition to the IP address assigned to the computer, the subnet mask, gateway, and DNS server information are also displayed. Mac OS In Mac OS X, open the [Terminal] application, enter ifconfig -a, Return...
Page 532: [Wireless Communication Settings] Screen
[Wireless communication settings] Screen On the [Wireless communication settings] screen, you can change the wireless communication function settings. Select [ 5 5: Wireless communication settings]. Wi-Fi settings See the next page. Wi-Fi function The following Wi-Fi functions are available: Communicate with smartphone Remote control (EOS Utility) Print from Wi-Fi printer Send images to Web service...
Page 533: [Wi-Fi Settings] Screen
[Wi-Fi settings] Screen Wi-Fi You can set whether to [Enable] or [Disable] the wireless communication function. When the use of electronic devices and wireless devices is prohibited, such as on board airplanes or in hospitals, set it to [Disable]. Password Set to [None] to allow a Wi-Fi connection to be established without a password (except when connecting to an access...
Page 534: Virtual Keyboard Operation
Virtual Keyboard Operation (7) (8) (9) Input area, for entering text Switch input modes Cursor keys, for moving in the Space input area Delete a character in the input Current no. of characters/no. area available Change the type of keyboard Keyboard Finish the text entry Press the <...
Page 535: Setting The Ip Address Manually
Setting the IP Address Manually Set up the IP address settings manually. The items displayed vary depending on the Wi-Fi function. Select [Manual setting]. Select [OK]. Select an item. Select an item to access the screen for numerical input. To use a gateway, select [Enable], then select [Address].
Page 536 Setting the IP Address Manually Select [OK]. When you have completed setting the necessary items, select [OK]. If you are not sure what to enter, see “Checking Network Settings” (p.531), or ask the network administrator or another person knowledgeable about the network.
Page 537: Wi-Fi/Bluetooth Status Display
Wi-Fi/Bluetooth Status Display Wireless communication status can be checked on the camera screen and LCD panel. Wi-Fi function Bluetooth function Wireless signal strength Wireless LCD Panel Communication status Wi-Fi function signal Wi-Fi function strength Wi-Fi: Disable Not displayed connected Wi-Fi: Enable Connecting (Blinking) Connected...
Page 538 Wi-Fi/Bluetooth Status Display Bluetooth Function Indicator Bluetooth Connection Screen LCD Panel function status Bluetooth connected Other than [Disable] Bluetooth not connected Bluetooth not [Disable] Not displayed Not displayed connected...
Page 539: Custom Functions / My Menu
Custom Functions / My Menu You can fine-tune camera functions and change the functionality of buttons and dials to suit your shooting preferences with Custom Functions and control customization. You can also add menu items and Custom Functions that you adjust frequently to My Menu tabs.
Page 540: Tab Menus: Customization
Tab Menus: Customization C.Fn1 p.542 p.542 p.543 p.543 p.544 p.545 p.546 C.Fn2 p.547 p.547 p.548 C.Fn3 p.548 p.548 p.549 p.549...
Page 541 Tab Menus: Customization C.Fn4 p.555 p.555 p.561 p.555 C.Fn5 p.550 p.551 p.551 p.552 p.553 C.Fn6 p.554...
Page 542: Custom Function Settings
Custom Function Settings N You can customize camera features on the [ 8 ] tab to suit your shooting preferences. Any settings you change from default values are displayed in blue. C.Fn1 Exposure level increments Sets 1/2-stop increments for the shutter speed, aperture, exposure compensation, AEB, flash exposure compensation, etc.
Page 543 Custom Function Settings Bracketing auto cancel Specify whether AEB and white balance bracketing settings are canceled when you set the power switch to < 2 > or switch to movie recording. [ON] Enable [OFF] Disable Bracketing sequence The AEB shooting sequence and white balance bracketing sequence can be changed.
Page 544 Custom Function Settings Number of bracketed shots The number of shots taken with AEB and white balance bracketing can be changed from the default of 3 shots, to 2, 5, or 7 shots. When [ 8 1: Bracketing sequence] is set to [0, -, +], the bracketed shots will be taken as shown in the table below.
Page 545 Custom Function Settings Safety shift If the subject brightness changes and the standard exposure cannot be obtained within the autoexposure range, the camera will automatically change the manually selected setting to obtain the standard exposure. When set to [Shutter speed/Aperture], applies to [ s ] and [ f ] mode. When set to [ISO speed], applies to [ d ], [ s ], and [ f ] mode.
Page 546 Custom Function Settings Same exposure for new aperture Maximum aperture may decrease (the lowest f/number may increase) in [ a ] mode (manual exposure shooting) with ISO speed set manually (except when set to ISO Auto) if you 1. Change lenses, 2. Attach an extender, or 3. Use a zoom lens with a variable maximum aperture.
Page 547 Custom Function Settings C.Fn2 Set shutter speed range You can set the shutter speed range. In [ t ], [ s ] and [ a ] mode, you can set the shutter speed manually within your specified range. In [ d ] and [ f ] mode, or in [ t ] mode with shutter speed set to [AUTO], the shutter speed is set automatically within your specified range (except for movie shooting).
Page 548 Custom Function Settings AE lock metering mode after focus For each metering mode, you can set whether to lock the exposure (AE lock) after achieving focus with One-Shot AF by pressing the shutter button halfway. The exposure will be locked while you keep pressing the shutter button halfway.
Page 549 Custom Function Settings Focus ring rotation RF lens focusing ring turning direction can be reversed. ] Normal ] Reverse direction RF lens MF focus ring sensitivity RF lens focusing ring sensitivity can be set. ] Varies with rotation speed ] Linked to rotation degree C.Fn4 For details on the [ 8 4] tab, see “Customizing Operations”...
Page 550 Custom Function Settings C.Fn5 Add cropping information Adding cropping information displays vertical lines for your specified aspect ratio, so that you can compose shots as if shooting with a medium- or large- format camera (6×6 cm, 4×5 inch, and so on). When you shoot, instead of cropping images recorded to the card, the camera adds aspect ratio information to images for cropping in Digital Photo Professional (EOS software).
Page 551 Custom Function Settings Default Erase option You can set the default option in the erase menu (p.335) accessed by pressing the < L > button during image playback or review after shooting. You can simply press < 0 > to erase the image immediately. [ ] [Cancel] selected [ ] [Erase]/[Erase 1 +JPEG] selected ] [Erase 1 ] selected...
Page 552 Custom Function Settings Retract lens on power off This is to set the lens retraction mechanism for when a gear-driven STM lens (such as EF40mm f/2.8 STM) is attached to the camera. You can set whether to retract the extended lens automatically when the camera’s power switch is set to <...
Page 553 Custom Function Settings Add IPTC information Registering IPTC (International Press Telecommunications Council) information to the camera from EOS Utility (EOS software) enables you to record (add) this information to JPEG/RAW still photos at the time of shooting. This is helpful in file management and other tasks using the IPTC information.
Page 554 Custom Function Settings C.Fn6 Clear all Custom Functions (C.Fn) Selecting [ 8 6: Clear all Custom Func. (C.Fn)] clears all Custom Function settings. Customized operations for [ 8 4] are not cleared if you perform [ 8 6: Clear all Custom Func. (C.Fn)]. Note that although information added using [ 8 5: Add IPTC information] is retained, the setting changes to [Disable].
Page 555: Customizing Operations
Customizing Operations N You can assign frequently used functions to camera buttons or dials according to your preferences for easy operations. Select an item on the [ 8 4] tab. [Customize buttons]: Assign functions to buttons, such as < V > or . [Customize dials]: Assign functions to dials, such as <...
Page 556 Customizing Operations Functions Available for Buttons Function Metering and AF start AF stop AE lock, AF stop AF point selection Direct AF point selection Set AF point to center Direct AF method selection* One-Shot AF z Servo AF* Touch & drag AF Eye Detection AF* Focus guide Metering start...
Page 557 Customizing Operations...
Page 558 Customizing Operations Function Dial function settings Short press: LCD illumination Long press: LCD information switching Short press: LCD information switching Long press: LCD illumination LCD panel illumination LCD panel information switching Shooting mode settings Switch to Custom shooting mode Depth-of-field preview* Reset selected item in Fv mode* Reset Tv/Av/ O /ISO in Fv mode* Quick Control screen...
Page 559 Customizing Operations < > stands for “AF stop button” provided on super telephoto lenses equipped with Image Stabilizer.
Page 560 Customizing Operations Functions Available for Dials Function Shutter speed setting in M mode Aperture setting in M mode Set ISO speed ( 5 during metering) Change aperture (hold metering button) Change shutter speed (hold metering button) Set ISO speed (hold metering button) Exposure compensation (hold metering button) Change aperture value Change shutter speed...
Page 561 Customizing Operations Customizing the M-Fn (Multi-Function) Bar Select [ 8 4: Customize M-Fn bar]. Select [ z ] (for use when shooting) or [ x ] (for use during playback). You can assign different functions to each. Select a function to assign. Selecting [ z ] (for shooting) or [ x ] (for playback) displays a screen of available functions.
Page 562 Customizing Operations Assign functions to swiping < m > or tapping each end. Selecting [ ] (swipe), [ ] (tap left end), or [ ] (tap right end) displays a screen to assign functions. Select options to assign to each operation.
Page 563 Customizing Operations Full Cover Setting When [Full cover setting] is enabled, you can access the M-Fn bar customization screen by fully covering < m >. ● To configure this setting, press the button on the screen in step 2.
Page 564 Customizing Operations Functions Available for the M-Fn Bar Function Change value/selected item ISO speed ISO speed Auto ISO speed Custom ISO speed (***) Change value/selected item White balance selection Auto: Ambience 89 White White balance Color temperature setting Custom white balance: (***) White balance shift/bracketing Change value/selected item Magnify / reduce...
Page 565: Tab Menus: My Menu
Tab Menus: My Menu p.566 p.569 p.569 p.570...
Page 566: Registering My Menu
Registering My Menu N Under My Menu tab, you can register menu items and Custom Functions whose settings you change frequently. Creating and Adding My Menu Tab Select [Add My Menu tab]. Select [OK]. You can create up to five My Menu tabs by repeating steps 1 and 2.
Page 567 Registering My Menu Select [Select items to register]. Register the desired items. Select the item to be set, then press < 0 >. Select [OK] on the confirmation dialog. You can register up to six items. To return to the screen in step 2, press the <...
Page 568 Registering My Menu Delete tab You can delete the current My Menu tab. Select [Delete tab] to delete the [MY MENU*] tab. Rename tab You can rename the My Menu tab from [MY MENU*]. Select [Rename tab]. Enter text. Press the < L > button to delete any unnecessary characters.
Page 569 Registering My Menu Deleting all My Menu tabs / Deleting all items You can delete all the created My Menu tabs or My Menu items registered under them. Delete all My Menu tabs You can delete all My Menu tabs you created. When you select [Delete all My Menu tabs], all the tabs from [MY MENU1] to [MY MENU5] will be deleted and the [ 9 ] tab will revert to its default.
Page 570 Registering My Menu Menu Display Settings You can select [Menu display] to set the menu screen that is to appear first when you press the < M > button. Normal display Displays the last displayed menu screen. Display from My Menu tab Displays with the [ 9 ] tab selected.
Page 571: Reference
Reference This chapter provides reference information on camera features.
Page 572: Software Overview
Software Overview You can download the latest version of EOS software or other dedicated software from the Canon website. Downloading and Installing the Software When using EOS software or other dedicated software, use the latest version available. To download it, you will need to enter the serial number on the bottom of the camera.
Page 573 Follow the on-screen instructions to install the software. Downloading the Software Instruction Manuals Software Instruction Manuals (PDF files) can be downloaded from the Canon Web site to your computer. Software Instruction Manual Download Site www.canon.com/icpd To view the Instruction Manuals (PDF files), an Adobe PDF viewing software such as Adobe Acrobat Reader DC (most recent version recommended) is required.
Page 574: Importing Images To A Computer
Importing Images to a Computer You can use EOS software to import images from the camera to a computer. There are two ways to do this. Importing by Connecting the Camera to the Computer Install the software (p.572) Connect the camera to the computer.
Page 575 Importing Images to a Computer Importing Images with a Card Reader You can use a card reader to import images to a computer. Install the software (p.572) Insert the card into the card reader. Use Digital Photo Professional to import the images. Refer to the Digital Photo Professional Instruction Manual.
Page 576: Charging A Battery In The Camera
LCD panel, and a protective circuit stops charging. In this case, unplug the power cord, reattach the battery, and wait a few minutes before plugging it in again. If the problem persists, contact your dealer or nearest Canon Service Center.
Page 577 Charging a Battery in the Camera If the access lamp does not light up, try unplugging the USB power adapter and plugging it in again. The charging time required and the amount charged vary depending on ambient temperature and remaining capacity. If the battery’s remaining capacity (p.387) is approx.
Page 578: Using A Battery Grip
Using a Battery Grip Featuring buttons and dials for vertical shooting, Battery Grip BG-E22 (sold separately) is an EOS R accessory that can power the camera with two batteries and charge LP-E6N via a USB power adapter (sold separately). Remove the contact covers.
Page 579 Using a Battery Grip Remove the battery compartment cover. Turn the camera off and remove the cover. With the cover off, remove the battery (p.43). Attach the cover to the battery grip. To remove the cover, slide the lever to release it, following the attachment procedure in reverse.
Page 580 Using a Battery Grip Remove the battery magazine. When reattaching the battery compartment cover to the camera, attach it opened to at least 90°. Do not touch the camera or battery grip contacts.
Page 581 Using a Battery Grip Attaching Batteries Attach the batteries. Insert the batteries as shown. When only one battery is used, it can be inserted in either position. To secure the batteries, push in the direction of the arrows until they click into place.
Page 582 Using a Battery Grip When attaching batteries, make sure the electrical contacts are clean. Wipe off any dirt on the contacts with a soft cloth. Attach batteries after attaching the battery grip to the camera. If the battery grip is attached to the camera with batteries already attached, it may prevent correct display of battery check results.
Page 583 Using a Battery Grip Attach the battery magazine. Guide the end of the cord out of the cord hole. Connect the DC coupler to the AC adapter. Securely connect the DC coupler’s plug to the connector of AC Adapter AC-E6 (sold separately). Connect the power cord.
Page 584 Using a Battery Grip Button and Dial Operations To use the buttons and dials, turn the vertical-grip operation switch (4) to The buttons and dials are used the same way as corresponding buttons and dials on the camera. ( 1 ) ( 2 ) ( 3 ) ( 4 )
Page 585 Using a Battery Grip Using a Flash with a PC Sync Cord The PC terminal enables you to use flash units with a PC sync cord. The PC sync cord can be used regardless of polarity. When configuring settings, use approx.
Page 586 Using a Battery Grip Charging Batteries in the Battery Grip Using USB Power Adapter PD-E1, you can charge LP-E6N batteries without removing them from the battery grip. You can also charge a single LP-E6N battery at one time. Or, you can charge the battery grip by itself.
Page 587 In this case, unplug the power cord, reattach the battery, and wait a few minutes before plugging it in again. If the problem persists, contact your dealer or nearest Canon Service Center. If the charge lamp does not light up, try unplugging the USB power adapter and plugging it in again.
Page 588: Troubleshooting Guide
● If the battery’s remaining capacity (p.387) is 94% or higher, the battery will not be recharged. ● Do not use any battery other than genuine Canon Battery Pack LP- E6N/LP-E6. The charger’s lamp blinks at high speed. ● If (1) the battery charger or battery has a problem or (2)
Page 589 In this case, unplug the power cord, reattach the battery, and wait a few minutes before plugging it in again. If the problem persists, contact your dealer or nearest Canon Service Center. The access lamp is not lit during charging with the USB power adapter.
Page 590 When the image recording is complete, the power will turn off automatically. [Does this battery/do these batteries display the Canon logo?] is displayed. ● Do not use any battery other than genuine Canon Battery Pack LP- E6N/LP-E6. ● Remove and install the battery again (p.43). ●...
Page 591 Troubleshooting Guide Shooting-Related Problems The lens cannot be attached. ● To attach EF or EF-S lenses, you will need a mount adapter. The camera cannot be used with EF-M lenses. No images can be shot or recorded. ● Make sure the card is properly inserted (p.44). ●...
Page 592 Troubleshooting Guide The image is out of focus or blurred. ● Set the lens’s focus mode switch to < > (p.50, 53). ● Press the shutter button gently to prevent camera shake (p.56). ● With a lens equipped with an Image Stabilizer, set the IS switch to <...
Page 593 The maximum burst displayed does not change when you switch cards, even if you switch to a high-speed card. The maximum burst shown in the table on page 609 is based on Canon’s testing card. (The faster the card’s writing speed, the higher the actual maximum burst will be.) For this reason, the maximum burst displayed may...
Page 594 Troubleshooting Guide ISO 100 cannot be set. ISO speed expansion cannot be selected. Check the [ISO speed range] setting under [ z 3: z ISO speed ● settings]. ● When [ z 3: Highlight tone priority] is set to [Enable] or [Enhanced], the available ISO speed range is ISO 200–40000 for still photo shooting.
Page 595 Troubleshooting Guide Using flash in [ f ] or [ d ] mode lowers the shutter speed. Under [ z 2: External Speedlite control], set [Slow synchro] to ● [1/200-1/60sec. auto] or [1/200 sec. (fixed)] (p.181). The flash does not fire. ●...
Page 596 Troubleshooting Guide High-speed sync is not available in [ f ] or [ d ] mode. Under [ z 2: External Speedlite control], set [Slow synchro] to ● [1/200-30sec. auto] or [1/200-1/60sec. auto] (p.181). Remote control shooting is not possible. ●...
Page 597 Troubleshooting Guide Movie shooting stops by itself. ● If the card’s writing speed is slow, movie shooting may stop automatically. For cards that can record movies, see page 611. To find out the card’s writing speed, refer to the card manufacturer’s website, etc.
Page 598 Still photos cannot be taken during movie shooting. Before taking still photos, stop shooting the movie, then select a shooting mode for still photos. 10-bit HDMI output is not available with Canon Log. ● No HDMI output is produced by the camera when set to [On (10bit)]...
Page 599 Troubleshooting Guide Problems with Wireless Features Wi-Fi function cannot be set. ● If the camera is connected to a computer or another device with an interface cable, Wi-Fi functions cannot be set. Disconnect the interface cable before setting any functions (p.426). A device connected with an interface cable cannot be used.
Page 600 Troubleshooting Guide Cannot pair with a smartphone. ● A previously paired smartphone cannot be paired with the camera again if the camera’s registration is retained on the smartphone. In such a case, remove the camera’s registration retained in the Bluetooth settings on the smartphone and try pairing again (p.439). Operation Problems I cannot change the setting with <...
Page 601 Troubleshooting Guide Display Problems The menu screen shows fewer tabs and items. ● In [ A ] mode, some tabs and items are not displayed. Tabs and items on the menu screen also vary for still photos and movies. The display starts with [ 9 ] My Menu or the [ 9 ] tab alone is displayed.
Page 602 Troubleshooting Guide The shooting date and time displayed are incorrect. ● Make sure the correct date and time are set (p.380). ● Check the time zone and daylight saving time (p.380). The date and time are not in the image. ●...
Page 603 Troubleshooting Guide Playback Problems Part of the image blinks in black. ● [ 3 3: Highlight alert] is set to [Enable] (p.309). A red box is displayed on the image. ● [ 3 3: AF point disp.] is set to [Enable] (p.309). During image playback, the AF points are not displayed.
Page 604 Troubleshooting Guide Operation sound and mechanical sound can be heard during movie playback. ● If you operate the camera’s dials or lens during movie shooting, the operation sound will also be recorded. Using the Directional Stereo Microphone DM-E1 (sold separately) is recommended (p.202). The movie appears to freeze momentarily.
Page 605 Troubleshooting Guide My card reader does not recognize the card. ● Depending on the card reader used and the computer’s operating system, SDXC cards may not be correctly recognized. In such a case, connect your camera to the computer with the interface cable, then import the images to the computer using EOS Utility (EOS software).
Page 606 Troubleshooting Guide Sensor Cleaning Problems The shutter makes a sound during sensor cleaning. ● Under [ 5 3: Sensor cleaning], when you select [Clean now f ], the shutter will make a mechanical sound during the cleaning, but no picture will be recorded to the card (p.391). Automatic sensor cleaning does not work.
Page 607: Error Codes
Communication between the devices is faulty. Check the camera, lens, or mount adapter contacts. C lean the electrical contacts on the camera, lens, and mount adapter, use a Canon lens, or reinstall the battery (p.30, 43). Card cannot be accessed. Reinsert/change card or format card with camera.
Page 608: Performance Data
Performance Data Still Photo Shooting Number of Possible Shots (Approx. number of shots) Room Temperature Low Temperature Temperature (23°C / 73°F) (0°C / 32°F) Possible shots • Based on using the screen and a fully charged battery pack (LP-E6N), with [ 5 4: Disp.
Page 609 31.3 17.3 1180 • The number of possible shots is based on Canon’s testing standards and an 32 GB card. • The maximum burst during continuous shooting is based on Canon’s standard testing SD card (Standard: 32 GB, High-speed: UHS-II 32 GB) and testing standards (<...
Page 610 Performance Data Pixel Count When Still Photo Cropping/Aspect Ratio is Set (Approx. pixels) Image Full-frame (3:2) 1.6x (crop) Quality 3 / 1 / F 6720x4480 (30.1 megapixels) 4176x2784 (11.6 megapixels) 4464x2976 (13.3 megapixels) – 3360x2240 (7.5 megapixels) – 2400x1600 (3.8 megapixels) 2400x1600 (3.8 megapixels) Image 1:1 (aspect ratio)
Page 611 Performance Data Movie Shooting Cards that Can Record Movies Movie Recording Quality SD Card UHS-II, Video Speed Class 60 or higher 65B4 UHS-I, UHS Speed Class 3 or higher UHS-I, UHS Speed Class 3 or higher SD Speed Class 10 or higher UHS-I, UHS Speed Class 3 or higher 65B4 65B4...
Page 612 Performance Data Total Movie Recording Time and File Size Per Minute (Approx.) Total Possible Recording Time on Movie Recording Card File size Quality 8 GB 32 GB 128 GB 2 min. 8 min. 35 min. 3444 MB/min. 8 min. 35 min. 2 hr.
Page 613 Performance Data Total Possible Time for Time-lapse Movie Shooting (Approx.) Time-lapse Movie Shooting Room Low Temperature Temperature (0°C / 32°F) Interval Screen Auto Off (23°C / 73°F) Disable 4 hr. 30 min. 4 hr. 2 sec. Enable 7 hr. 10 min. 6 hr.
Page 614 Performance Data ISO Speed in Movie Shooting In [ y ] Mode For HD/Full HD and High Frame Rate movies, ISO speed is automatically set in a range of ISO 100–25600. For 4K movies, ISO speed is automatically set in a range of ISO 100–12800.
Page 615 Performance Data In [ M ] Mode For HD/Full HD and High Frame Rate movies with ISO speed set to [AUTO], it is automatically set in a range of ISO 100–25600. For 4K movies with ISO speed set to [AUTO], ISO speed is automatically set in a range of ISO 100–12800.
Page 616 Performance Data Image Playback Resize Options by Original Image Quality Available Resize Settings Original Image Quality * Only b is available for images shot with [ z 1: z Cropping/aspect ratio] set to [1.6x (crop)]. Size for Resized Images (Approx. pixels) Image Full-frame (3:2) 1.6x (crop)
Page 617: Information Display
Information Display LCD Panel Still photo/movie standby screen 1 (1) Multi-function lock (2) Shooting mode (3) Battery level (10) (4) Flash exposure compensation (11) (5) Exposure compensation (12) (6) Bluetooth function (7) Wi-Fi function (13) (8) Shutter speed (9) Aperture (10) Movie Av 1/8-stop increments (11) Exposure level indicator/Exposure compensation amount/ AEB range...
Page 618 Movie standby screen 2 (1) AF method (2) Movie digital IS (3) Image size (4) White balance (5) Canon Log (6) Movie recording time available (7) Frame rate Movie recording in progress (1) Elapsed recording time (2) Recording in progress/External...
Page 619 Information Display Still Photo Shooting Screen Each time you press the button, the information display will change. Viewfinder display positions vary for some items. The display will show only the settings currently applied. (12) (13) (14) (15) (16) (17) (18)
Page 620 Information Display (32) (33) (24) (34) (25) (35) (26) (36) (27) (28) (37) (38) (29) (39) (30) (40) (41) (31) (24) Flash ready/Flash off/FE lock/ (32) Focus distance display High-speed sync (33) Bluetooth function (25) Silent shutter (34) Exposure simulation (26) Touch shutter (35) Magnify button (27) AE lock...
Page 621 Information Display Movie Shooting Screen Each time you press the button, the information display will change. Viewfinder display positions vary for some items. The display will show only the settings currently applied. (12) (13) (14) (15) (16) (17) (18) (19)
Page 622 (33) (27) (28) (34) (22) Sound-recording level indicator (28) Aperture (manual) (29) Exposure level indicator (23) Canon Log (30) Bluetooth function (24) AE lock (31) ISO speed (25) Shutter speed (32) Highlight tone priority (26) View Assist (33) Exposure compensation...
Page 623 Information Display Scene Icons In [ A ] or [ y ] shooting mode, the camera detects the type of scene, and all settings are configured accordingly. The detected scene type is indicated on the upper left of the screen. Portrait* Non-Portrait Subject...
Page 624 Information Display *4: The icon of the scene selected from the detectable scenes will be displayed. *5: Displayed when all the following conditions apply: The shooting scene is dark, it is a night scene, and the camera is mounted on a tripod.
Page 625 Information Display Playback Screen Basic information display for still photos (10) (11) (12) (13) (14) (15) Wi-Fi function Already sent to a computer/ smartphone Wi-Fi signal strength (10) Rating Battery level (11) Image protection Playback No./Total images/ Number of found images (12) Folder number-File number Shutter speed (13) Image quality/Edited image/...
Page 626 Information Display Detailed information display for still photos (10) (11) (12) (13) (14) (15) (16) (17) Aperture (10) Histogram (Brightness/RGB) Shutter speed (11) ISO speed Shooting mode/Multiple (12) Highlight tone priority exposure/Time-lapse movie (13) Scroll bar White balance (14) Flash exposure compensation/ Auto Lighting Optimizer Bounce/HDR shooting/Multi Shot Noise Reduction...
Page 627 Detailed information display for movies Movie playback Frame Rate Picture Style: Settings HDR movie/Movie digital IS Canon Log: Characteristics Recording time Movie recording format Compression rate Movie recording size During movie playback, “*, *” will be displayed for [Fineness] and...
Page 628 The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Canon Inc. is under license. Other trademarks and trade names are those of their respective owners. All other trademarks are the property of their respective owners.
Page 629 About MPEG-4 Licensing “This product is licensed under AT&T patents for the MPEG-4 standard and may be used for encoding MPEG-4 compliant video and/or decoding MPEG-4 compliant video that was encoded only (1) for a personal and non-commercial purpose or (2) by a video provider licensed under the AT&T patents to provide MPEG-4 compliant video.
Page 630 Canon accessories. Therefore, using this product with genuine accessories is highly recommended. Canon shall not be liable for any damage to this product and/or accidents such as malfunction, fire, etc. caused by the failure of non-genuine Canon accessories (e.g., a leakage and/or explosion of a battery). Please note that...
Page 633: Index
4, 9, 36, or 100 images ...... 310 Orientation linked AF point ..... 299 4K frame capture ....... 329 Out of focus ........54 8bit (Canon Log) ........ 238 Recomposing ......... 126 10bit (Canon Log) ......238 Touch & drag AF ......279 10- or 2-sec.
Page 634 Autofocus 9 AF Holding the camera ......55 Camera shake ........125 Auto Lighting Optimizer ..... 104 Canon Log ......... 236 Auto power off ........377 Card requirements ......197, 611 Auto reset .......... 369 Cards ......10, 30, 44, 373, 611 Av (Aperture-priority AE) ....
Page 635 Index Custom shooting mode...... 417 Dust Delete Data ....... 121 Custom white balance ....... 100 Eco mode .......... 376 D+ ............109 Electronic level ........397 Date/time ........... 380 Erasing images ........335 Daylight saving time ......381 Err (error codes) ........ 607 DC Coupler ........
Page 636 Index File size ......200, 609, 612 For editing (ALL-I)......195 Filter effect (Monochrome) ....94 Formatting (card initialization) ... 373 Fine Detail ........... 89 Frame Grab ........329 Fine (Image-recording quality)..... 75 Frame rate ......... 195, 384 Fineness (Sharpness) ......93 Free run ..........
Page 637 Index High dynamic range 9 HDR Jump display (image browsing) ..311 Magnifying images ......315 High Frame Rate ....... 199 Manual reset ........369 High ISO speed noise reduction ..105 Manual rotation ....... 317 Highlight alert........309 Playback ......... 301 Highlight tone priority ......
Page 638 Index Jump display........311 Malfunction ........588 Manual exposure ....... 138 Manual focus ........255 Landscape ........... 89 Manual focusing ........ 281 Language........... 383 Manual reset ........369 Large (image-recording quality)... 75 Maximum burst ........77 Large Zone AF ......267, 271 Medium (image-recording quality) ..
Page 639 High ISO speed ......105 Movie Servo AF ....286, 291, 292 Long exposures ......107 Movie Servo AF tracking Non-Canon flash units ....... 178 sensitivity ........291 Normal (Image-recording quality) ..75 Movie shooting button ....209 NTSC ......... 195, 384 Playback .........
Page 640 Index Program AE ........132 Program shift ........133 PAL ..........195, 384 Protecting images ......318 Partial metering ......... 152 Part names .......... 31 PC terminal ........585 Quick Control ........68 Peripheral illumination Quick control dial ......... 59 correction ........
Page 641 Index Scene Intelligent Auto ......123 Shooting range ........400 Screen ........... 30, 47 Shutter button ........56 Adjusting angle ......47, 55 Shutter button functions..... 404 Brightness ........378 Shutter-priority AE ......134 Color tone ........379 Shutter synchronization ..... 185 Electronic level .......
Page 642 USB (digital) terminal... 32, 348, 574 Camera access point mode .... 508 Camera Connect ....427, 444 User Def..........90 CANON iMAGE GATEWAY .... 481 UTC (Coordinated Universal Time) ... 415 Clearing wireless communication settings ........... 515 Communicating with a Vari-angle screen ......
Page 643 Index Manual setting ......535 SSID ....... 441, 462, 470 MAC address ......496, 516 Switch network ....498, 502, 505 Network ......441, 462, 470 Use with EOS software ....461 Network settings ......531 Auto send ........466 Nickname ........
Page 644 The descriptions in this Instruction Manual are current as of May 2018. For information on the compatibility with any products introduced after this date, contact any Canon Service Center. For the latest version Instruction Manual, refer to the Canon Web site.

Canon EOS R Advanced User's Manual

Introduction

Preparation and Basic Operations

Shooting

Shooting Still Photos

BULB: Long (Bulb) Exposures

Shooting Movies

Af

Playback

Set-Up

Wi-Fi (Wireless Communication) Functions

[Wireless Communication Settings] Screen

[Wi-Fi Settings] Screen

Custom Functions / My Menu

Reference

Quick Links

Related Manuals for Canon EOS R

Summary of Contents for Canon EOS R