Table of Contents
Advertisement
3.
In [Select GPS device], select [GPS receiver].
4.
Take the picture.
Caution
Precautions when using GP-E2
Before use, check the countries and regions where use of GPS is allowed, and
follow local regulations.
Update the GP-E2 firmware to Ver. 2.0.0 or later.
Firmware updating requires an interface cable. For updating instructions, visit the
Canon website.
GP-E2 cannot be connected to the camera with a cable.
The camera does not record the shooting direction.
For details on [Set up], refer to the GP-E2 Instruction Manual.
585
Advertisement
Table of Contents
