Table of Contents
Advertisement
Checking and Deleting Multiple Exposures During
Shooting
To view the multiple-exposure image so far, check exposure, and see how the images are
merged, you can press the <
of exposures (when [On:Func/Ctrl] is set, but not with [On:ContShtng]).
Pressing the <
> button will display the operations possible during multiple-exposure
shooting.
Option
Return to previous
screen
Undo last image
Save and exit
Exit without saving
Caution
During multiple-exposure shooting, you can only play back multiple-exposure
images.
FAQ
Are there any restrictions on the image quality?
All single exposures and the multiple-exposure image are captured at your specified
image quality.
Can I merge images recorded on the card?
With [Select image for multi. expo.], you can select the first single exposure from the
images recorded on the card (
recorded on the card.
> button before you finish shooting your specified number
The screen before you pressed the <
Deletes the last image you shot (enabling you to replace it by shooting again).
The number of remaining exposures will increase by 1.
With [Save source imgs: All images], saves all single exposures and the
multiple-exposure image created so far and exits multiple-exposure shooting.
With [Save source imgs: Result only], saves only the multiple-exposure
image created so far and exits multiple-exposure shooting.
Exits the multiple-exposure shooting without saving the image.
). Note that you cannot merge multiple images already
Description
> button will reappear.
228
Advertisement
Table of Contents
