Table of Contents
Advertisement
46: For the data session, error code received from FTP server
What to check on the FTP server
The connection was terminated by the FTP server.
• Restart the FTP server.
Do the user rights for the FTP server allow reading, writing, and log access?
• Configure the FTP server's user rights to allow reading, writing, and log access.
Do user rights allow access to the target folder on the FTP server?
• Configure the user rights for access to the target folder on the FTP server to allow
saving images from the camera.
Is the FTP server on?
• Turn on the FTP server. The server may have been turned off because of an
energy-saving mode.
Is the hard disk of the FTP server full?
• Increase available space on the hard disk.
47: Image file transfer completion not confirmed by FTP server
This error occurs from a failure to receive confirmation from the FTP server that
image file transfer is complete for some reason.
• Restart the FTP server and camera and send the images again.
48: Security of the connection to the target server cannot be verified.
If you trust this server and connect, set [Trust target server] to
[Enable].
This error occurs from a failure to confirm security of the target server connection
when connecting via FTPS.
• Confirm that the certificate is set correctly.
• Change [Trust target server] to [Enable] if you prefer to trust target servers
regardless of certificate settings.
608
Advertisement
Table of Contents
