Canon EOS R5 Advanced User's Manual

Table of Contents

Quick Links

Download this manual

Advanced User Guide

CT2-D091-A

Table of Contents

Troubleshooting

Summary of Contents for Canon EOS R5

Page 2 Contents Introduction..........9 Package Contents.
Page 3 M: Manual Exposure......... . . 119 BULB: Long (Bulb) Exposures.
Page 4 Canon Log Settings........
Page 5 Selecting the AF Method........390 Continuous AF.
Page 6 Slide Show........... 557 Setting Image Search Conditions.
Page 7 Security........... . . 720 Checking Network Settings.
Page 8 Battery Information..........789 Copyright Information.
Page 9 Also be aware that certain public performances, exhibitions, etc. may prohibit photography even for private enjoyment. Connecting other devices Use the included interface cable or a Canon cable when connecting the camera to a computer or other device. When connecting an interface cable, also use the included cable protector ( •...
Page 10 ) or HDMI cable. If you purchased a Lens Kit, check that the lenses are included. Be careful not to lose any of these items. No software CD-ROM is included. Software ( ) can be downloaded from the Canon website.
Page 11 Caution When you need Lens Instruction Manuals, download them from the Canon website The Lens Instruction Manuals (PDF files) are for lenses sold individually. Note that when purchasing the Lens Kit, some of the accessories included with the lens may...
Page 12 The Instruction Manual included with the camera provides basic instructions for the camera and Wi-Fi functions. Advanced User Guide Complete instructions are provided in this Advanced User Guide. For the latest Advanced User Guide, refer to the following website. https://cam.start.canon/C003/ Lens/Software Instruction Manual Download from the following website. https://cam.start.canon/ Note...
Page 13 Quick Start Guide Insert the battery ( Upon purchase, charge the battery to start using ( Insert the card ( You can insert two cards. Attach the lens ( Align the red mount index on the lens with the red mount index on the camera to attach the lens.
Page 14 Set the lens’s focus mode switch to < > ( Set the power switch to < > ( Flip out the screen ( When the date/time/zone setting screen is displayed, see Date/Time/ Zone.
Page 15 Set the shooting mode to [ Press the < > button, then turn the < > dial to select [ All the necessary camera settings will be set automatically. Focus on the subject ( An AF point [ ] appears over any face detected. Press the shutter button halfway, and the camera will focus on the subject.
Page 16 Review the picture. The image just captured will be displayed for approx. 2 sec. on the screen. To display the image again, press the < > button (...
Page 17 About This Guide Icons in This Guide Basic Assumptions for Operational Instructions and Sample Photos Icons in This Guide Indicates the Main dial. < > Indicates Quick control dial 1. < > Indicates Quick control dial 2. < > Indicates the Multi-controller. <...
Page 18 Basic Assumptions for Operational Instructions and Sample Photos Before following any instructions, make sure the power switch is set to < > and the Multi-function lock feature is off ( It is assumed that all the menu settings and Custom Functions are set to their defaults. Illustrations in this guide show the camera with the RF24-105mm F4 L IS USM lens attached as an example.
Page 19 Compatible Cards The following cards can be used with the camera regardless of capacity. If the card is new or was previously formatted (initialized) by another camera or computer, format it with this camera ( CFexpress cards * Type-B compatible SD/SDHC/SDXC memory cards UHS-II and UHS-I cards supported.
Page 20 Safety Instructions Be sure to read these instructions in order to operate the product safely. Follow these instructions to prevent injury or harm to the operator of the product or others. WARNING: Denotes the risk of serious injury or death. Keep the product out of the reach of young children.
Page 21 Observe the following instructions when using a battery charger. • Periodically remove any dust buildup from the power plug and power outlet using a dry cloth. • Do not plug in or unplug the product with wet hands. • Do not use the product if the power plug is not fully inserted into the power outlet. •...
Page 22 CAUTION: Follow the cautions below. Otherwise physical injury or property damage may result. Do not fire the flash near the eyes. It may hurt the eyes. Do not look at the screen or through the viewfinder for prolonged periods of time. This may induce symptoms similar to motion sickness.
Page 23 If you accidentally drop the camera into water or are concerned that moisture (water), dirt, dust, or salt may have gotten inside it, promptly consult the nearest Canon Service Center. Never leave the camera near anything having a strong magnetic field such as a magnet or electric motor.
Page 24 If you have not used the camera for some time or if there is an important shoot such as a foreign trip coming up, have the camera checked by your nearest Canon Service Center or check the camera yourself and make sure it is working properly.
Page 25 Lens After detaching the lens from the camera, put down the lens with the rear end up and attach the rear lens cap to avoid scratching the lens surface and electrical contacts (1).
Page 26 Besides dust entering the camera from outside, in rare cases, lubricant from the camera’s internal parts may adhere to the front of the sensor. If smudges are visible on images, have the sensor cleaned by a nearest Canon Service Center. Battery Tips for using the battery and charger Store in a cool, dry, well-ventilated location.
Page 27 Part Names Attaching the Strap Using the Cable Protector...
Page 28 < > button Movie shooting button < > Main dial < > Multi-function button Shutter button < > LCD panel info switching/illumination button Self-timer lamp/AF-assist beam Remote control sensor Grip (battery compartment) (10) DC coupler cord hole (11) Depth-of-field preview button (12) Contacts (13)
Page 29 (10) (11) (12) (21) (13) (22) (14) (23) (15) (24) (16) (25) (17) (18) (19) (20)
Page 30 Eyecup Viewfinder eyepiece < > Menu button Speaker Terminal cover LCD panel < > Multi-function lock button < > Quick control dial 2 < > AF start button (10) < > Multi-controller (can also be pressed straight in) (11) < >...
Page 31 Dioptric adjustment knob Accessory positioning hole Screen Tripod socket Serial number (body number) < > AE lock button < > AF point selection button Strap mount Card slot cover (10) Card eject button (11) Card slot 2 (12) Card slot 1 (13) Battery compartment cover lock (14)
Page 32 LCD Panel Information Display Information displayed varies depending on camera status. For icon details, see Information Display. Viewfinder information display Information displayed varies depending on camera status. Battery Charger LC-E6 Charger for Battery Pack LP-E6NH/LP-E6N/LP-E6 ( Battery slot Charge lamp Power plug...
Page 33 Battery Charger LC-E6E Charger for Battery Pack LP-E6NH/LP-E6N/LP-E6 ( Charge lamp Battery pack slot Power cord Power cord socket...
Page 34 Attaching the Strap Pass the end of the strap through the strap mount from the bottom, then pass it through the strap buckle as shown. Pull the strap to take up any slack and make sure the strap will not loosen from the buckle.
Page 35 Using the Cable Protector When connecting the camera to a computer, use the included interface cable or a Canon cable. When connecting an interface cable, also use the included cable protector. Using the cable protector helps prevent accidental disconnection and terminal damage.
Page 36 Using a slim cable...
Page 37 Using a thick cable (3) Included interface cable Using a slim cable Using a thick cable...
Page 38 Using a slim cable Using a thick cable...
Page 39 Using a slim cable Using a thick cable (4) HDMI cable (sold separately)
Page 40 Using an optional Canon interface cable When using an optional Canon interface cable, pass the cable through the clamp (5) as shown before attaching the clamp to the cable protector. Caution Using the camera when the interface cable is connected without the cable protector may damage the digital terminal.
Page 41 Software Software Overview Downloading and Installing EOS Software or Other Dedicated Software Downloading the Software Instruction Manual Software Overview This section summarizes software used with EOS cameras. Note that downloading and installing the software requires an internet connection. The software cannot be downloaded or installed in environments without an internet connection.
Page 42 Downloading and Installing EOS Software or Other Dedicated Software Always install the latest version of the software. Update any previous versions that are installed by overwriting them with the latest version. Caution Do not connect the camera to a computer before you install the software. The software will not be installed correctly.
Page 43 Download the software. Connect to the internet from a computer and access the following Canon website. https://cam.start.canon/ Select your country or region of residence and download the software. Depending on the software, you may need to enter the camera’s serial number.
Page 44 Downloading the Software Instruction Manual Software Instruction Manuals (PDF files) can be downloaded from the Canon website to your computer, etc. Software Instruction Manual download site https://cam.start.canon/...
Page 45 Preparation and Basic Operations This chapter describes preparatory steps before you start shooting and the basic camera operations. • Charging the Battery • Inserting/Removing Batteries • Inserting/Removing Cards • Using the Screen • Turning on the Power • Attaching/Detaching RF Lenses •...
Page 46 Charging the Battery Detach the protective cover provided with the battery. Fully insert the battery into the charger. Do the opposite to remove the battery.
Page 47 Recharge the battery. For LC-E6 As shown by the arrow, fl ip out the battery charger’s prongs and insert the prongs into a power outlet. For LC-E6E Connect the power cord to the charger and insert the plug into a power outlet.
Page 48 Upon purchase, the battery is not fully charged. Charge the battery before use. Charge the battery on the day before or on the day it is to be used. Charged batteries gradually lose their charge, even when they are not used. After charging the battery, remove it and disconnect the charger from the power outlet.
Page 49 Inserting/Removing Batteries Insertion Removal Insert a fully charged Battery Pack LP-E6NH (or LP-E6N/LP-E6) in the camera. Insertion Slide the battery compartment cover lock and open the cover. Insert the battery. Insert the end with the electrical contacts. Insert the battery until it locks in place.
Page 50 Close the cover. Press the cover until it snaps shut. Caution You cannot use batteries other than Battery Pack LP-E6NH/LP-E6N/LP-E6.
Page 51 Removal Open the cover and remove the battery. Press the battery lock lever as shown by the arrow and remove the battery. To prevent short-circuits, always attach the included protective cover ) to the battery.
Page 52 Inserting/Removing Cards Insertion Formatting the Card Removal This camera accepts two cards. Recording is possible as long as there is at least one card in the camera. With two cards inserted, you can select one card to record to, or you can record the same image to both cards at once ( Caution Make sure the SD card’s write-protect switch (1) is set upward to enable...
Page 53 Insert the card. Card 1 (CFexpress card) Card 2 (SD card) The card in the rear card slot is [ ] (CFexpress card), and the one in front of it is [ ] (SD card). CFexpress card: With the card label facing you, insert the open side of the card (2) into the card slot.
Page 54 Close the cover. Close the cover and slide it in the direction shown by the arrows until it snaps shut.
Page 55 Set the power switch to < > ( (3) Card selection icon (4) Card 1 (CFexpress card) (5) Card 2 (SD card) Shooting screen ( ) or Quick Control screen ( ) accessed by pressing the < > button shows which cards are loaded. Cards labeled with [ ] are selected for recording.
Page 56 Formatting the Card If the card is new or was previously formatted (initialized) by another camera or computer, format the card with this camera (...
Page 57 Removal Open the cover. Set the power switch to < >. Check that the access lamp (1) is off, then open the cover. If [Saving...] is displayed on the screen, close the cover. Remove the card. CFexpress card: Press the card eject button (2) to eject the card. SD card: Gently press the card in, then release it to eject it.
Page 58 Note The number of shots available varies depending on remaining card capacity and settings such as image quality and ISO speed. Setting [ : Release shutter without card] to [Disable] will prevent you from forgetting to insert a card ( Caution When the access lamp is lit or blinking, it indicates that images are being written to, read from, or erased from the card, or data is being transferred.
Page 59 Using the Screen You can change the direction and angle of the screen. Flip out the screen. Rotate the screen. When the screen is out, you can tilt it up or down or rotate it to face the subject. Indicated angles are only approximate. Face it toward you.
Page 60 Caution Avoid forcing the screen into position as you rotate it, which puts undue pressure on the hinge. When a cable is connected to a camera terminal, the rotation angle range of the flipped-out screen will be limited. Note Keep the screen closed and facing the camera body when the camera is not in use. You can protect the screen.
Page 61 Turning on the Power Setting the Date, Time, and Time Zone Changing the Interface Language Automatic Sensor Cleaning Battery Level Indicator < > The camera turns on. < > The camera is turned off and does not function. Set the power switch to this position when not using the camera.
Page 62 Changing the Interface Language To change the interface language, see Language.
Page 63 Automatic Sensor Cleaning Whenever the power switch is set to < >, the sensor is cleaned automatically (which may make a faint sound). During the sensor cleaning, the screen will display ]. To enable automatic sensor cleaning when the power switch is set to < >...
Page 64 Battery Level Indicator When the power switch is set to < >, the battery level will be indicated. Display Level (%) 100–70 69–50 49–20 19–10 9–1 Note Doing any of the following will exhaust the battery faster: • Pressing the shutter button halfway for a prolonged period. •...
Page 65 Attaching/Detaching RF Lenses Attaching a Lens Detaching a Lens Caution Do not look at the sun directly through any lens. Doing so may cause loss of vision. When attaching or detaching a lens, set the camera’s power switch to < >.
Page 66 Attaching a Lens Remove the caps. Remove the rear lens cap and the body cap by turning them as shown by the arrows. Attach the lens. Align the red mount index on the lens with the red mount index on the camera and turn the lens as shown by the arrow until it clicks in place.
Page 67 Set the lens’s focus mode switch to < >. < > stands for autofocus. < > stands for manual focus. Autofocus will not operate. For RF lenses without a focus mode switch, set to [AF] or [MF] in the camera menu, in [ : Focus mode].
Page 68 Detaching a Lens While pressing the lens release button, turn the lens as shown by the arrow. Turn the lens until it stops, then detach it. Attach lens caps to the lens you removed.
Page 69 Attaching/Detaching EF/EF-S Lenses Attaching a Lens Detaching a Lens All EF and EF-S lenses can be used by attaching an optional Mount Adapter EF-EOS R. The camera cannot be used with EF-M lenses. Attaching a Lens Remove the caps. Remove the rear lens cap and the body cap by turning them as shown by the arrows.
Page 70 Attach the lens to the adapter. Align the red or white mount index on the lens with the corresponding mount index on the adapter and turn the lens as shown by the arrow until it clicks into place. (1) Red index (2) White index Attach the adapter to the camera.
Page 71 Set the lens’s focus mode switch to < >. < > stands for autofocus. < > stands for manual focus. Autofocus will not operate. Remove the front lens cap.
Page 72 Detaching a Lens While pressing the lens release button, turn the adapter as shown by the arrow. Turn the lens until it stops, then detach it. Detach the lens from the adapter. Hold down the lens release lever on the adapter and turn the lens counterclockwise.
Page 73 Using the Viewfinder Look through the viewfinder to activate it. You can also restrict display to either the screen or viewfinder ( Adjusting the Viewfinder Turn the dioptric adjustment knob. Turn the knob left or right to make the viewfinder display look sharp. Caution The viewfinder and screen cannot be activated at the same time.
Page 74 Basic Operations Holding the Camera Shutter Button < > Main Dial < > Quick Control Dial 1 < > Quick Control Dial 2 < > Multi-Controller < > Button < >: Multi-Function Button < >: AF Start Button < >: Multi-Function Lock Button <...
Page 75 Holding the Camera Viewing the screen as you shoot As you shoot, you can tilt the screen to adjust it. For details, see Using the Screen. (1) Normal angle (2) Low angle (3) High angle Shooting through the viewfinder To obtain sharp images, hold the camera still to minimize camera shake. (1) Horizontal shooting (2) Vertical shooting 1.With your right hand, hold the camera firmly by the camera grip.
Page 76 Shutter Button The shutter button has two steps. You can press the shutter button halfway. Then you can further press the shutter button completely. Pressing halfway This activates autofocusing and the automatic exposure system that sets the shutter speed and aperture value. The exposure value (shutter speed and aperture value) is displayed on the screen, in the viewfinder, or on the LCD panel for 8 sec.
Page 77 Note The camera will still pause before taking a picture if you press the shutter button completely without pressing it halfway first, or if you press the shutter button halfway and immediately press it completely. Even during menu display or image playback, you can return to shooting standby by pressing the shutter button halfway.
Page 78 < > Main Dial (1) After pressing a button, turn the < > dial. Press a button such as < > or < >, then turn the < > dial. If you press the shutter button halfway, the camera will go back to shooting standby. Used for operations such as setting the ISO speed, drive mode, AF operation, white balance, and flash exposure compensation.
Page 79 < > Quick Control Dial 1 (1) After pressing a button, turn the < > dial. Press a button such as < > or < >, then turn the < > dial. If you press the shutter button halfway, the camera will go back to shooting standby. Used for operations such as selecting the ISO speed, drive mode, AF operation, white balance, and flash exposure compensation.
Page 80 < > Quick Control Dial 2 (1) After pressing a button, turn the < > dial. Press a button such as < >, then turn the < > dial. If you press the shutter button halfway, the camera will go back to shooting standby. Used for operations such as switching between main tabs on the menu screen.
Page 81 < > Multi-Controller < > is an eight-direction key with center button. To use it, press lightly with the tip of your thumb. Used for operations such as white balance correction, AF point/magnifying frame movement in still photo shooting or movie recording, magnifying frame movement during playback, or Quick Control settings.
Page 82 < > Button You can set the shooting mode. Press the < > button, then turn the < > dial to select a shooting mode. To switch between shooting still photos and recording movies, press the < > button and then the < >...
Page 83 < >: Multi-Function Button By pressing the < > button and turning the < > dial, you can set the ISO speed ), drive mode ( ), AF operation ( ), white balance ( ), and flash exposure compensation ( To select the AF area or AF method, press the <...
Page 84 < >: AF Start Button Equivalent to pressing the shutter button halfway (except in [ ] mode).
Page 85 < >: Multi-Function Lock Button With [ : Multi function lock] configured ( ), you can press the < > button to prevent settings from being changed by accidentally touching the Main dial, Quick Control dials, Multi-controller, control ring, or touch-screen panel. Press the < >...
Page 86 < > LCD Panel Info Switching/Illumination Button Each press of the < > button changes the information on the LCD panel. Illuminate the LCD panel by holding down the < > button ( Access the [Screen brightness] setting by pressing the < >...
Page 87 < > Control Ring By default, exposure compensation can be set by turning the control ring of RF lenses or mount adapters while pressing the shutter button halfway in [ ], [ ], [ ], [ ], or [ mode. Otherwise, you can assign a different function to the control ring by customizing operations in [ : Customize dials] (...
Page 88 < >: Info Button Each press of the < > button changes the information shown. The following sample screens are for still photos.
Page 89 Menu Operations and Settings Menu Screen in [ ] Mode Menu Screen in [ ]/[ ]/[ ] Mode Menu Setting Procedure Dimmed Menu Items < > button < > button < > button Screen < > Quick control dial 1 <...
Page 90 Menu Screen in [ ] Mode In [ ] mode, some tabs and menu items are not displayed.
Page 91 Menu Screen in [ ]/[ ]/[ ]/[ ]/[ ] Mode Main tabs Secondary tabs Menu items : Shooting : Autofocus : Playback : Wireless features : Set-up : Custom Functions (10) : My Menu (11) Menu settings...
Page 92 Menu Setting Procedure Display the menu screen. Press the < > button to display the menu screen. Select a tab. Each time you turn the < > dial, the main tab (group of functions) will switch. You can also switch tabs by pressing the < >...
Page 93 Select an option. Turn the < > dial to select an option. The current setting is indicated in blue. Set an option. Press < > to set it. Exit the setting. Press the < > button to return to shooting standby. Note The description of menu functions hereafter assumes that you have pressed the <...
Page 94 Dimmed Menu Items Example: When Highlight tone priority has been set Dimmed menu items cannot be set. The menu item is dimmed if another function setting is overriding it. You can see the overriding function by selecting the dimmed menu item and pressing <...
Page 95 Quick Control You can directly and intuitively select and set the settings displayed. Press the < > button ( Select a setting item and set your preferred option. To select an item, turn the < > dial or press < >...
Page 96 Touch-Screen Operation Tapping Dragging Tapping Sample screen (Quick Control) Use your finger to tap (touch briefly and then remove your finger from) the screen. For example, when you tap [ ], the Quick Control screen appears. By tapping [ you can return to the preceding screen. Note To have the camera beep for touch operations, set [ : Beep] to [Enable] ( Responsiveness to touch operations can be adjusted in [ : Touch control] (...
Page 97 Dragging Sample screen (Menu screen) Slide your finger while touching the screen.
Page 98 Shooting Mode This chapter describes shooting modes. • A+: Fully Automatic Shooting (Scene Intelligent Auto) • A+: Fully Automatic Techniques (Scene Intelligent Auto) • Fv: Flexible-Priority AE • P: Program AE • Tv: Shutter-Priority AE • Av: Aperture-Priority AE • M: Manual Exposure •...
Page 99 A+: Fully Automatic Shooting (Scene Intelligent Auto) ] is a fully automatic mode. The camera analyzes the scene and sets the optimum settings automatically. It can also adjust focus automatically on either the still or moving subject by detecting the motion of the subject ( Set the shooting mode to [ Press the <...
Page 100 Focus on the subject. Press the shutter button halfway to focus. You can also focus by tapping a person’s face or another subject on the screen (Touch AF) when [ : Continuous AF] is set to [Disable]. Under low light, the AF-assist beam ( ) is automatically activated if needed.
Page 101 Note AF operation (One-Shot AF or Servo AF) is set automatically when you press the shutter button halfway. Note that AF operation cannot be switched during shooting. ] mode makes the colors look more impressive in nature, outdoor, and sunset scenes.
Page 102 (autofocus). The shutter speed display is blinking. Since it is too dark, taking the picture may result in a blurred subject due to camera shake. Using a tripod or a Canon EL/EX series Speedlite (sold separately, ) is recommended. The bottom of pictures taken with flash is unnaturally dark.
Page 103 A+: Fully Automatic Techniques (Scene Intelligent Auto) Recomposing the Shot Shooting Moving Subjects Scene Icons Recomposing the Shot Depending on the scene, positioning the subject toward the left or right to include a balanced background will result in a picture with better perspective. Pressing the shutter button halfway to focus on a still subject will lock the focus on that subject.
Page 104 Shooting Moving Subjects After you press the shutter button halfway and a blue AF point appears, the camera detects subject movement and focuses using Servo AF. Keep the subject on the screen as you hold down the shutter button halfway, and at the decisive moment, press the shutter button completely.
Page 105 Scene Icons The camera detects the scene type and sets everything automatically to suit the scene. The detected scene type is indicated in the upper left of the screen. For icon details, see Scene Icons.
Page 106 Fv: Flexible-Priority AE In this mode, you can set shutter speed, aperture value, and ISO speed manually or automatically and combine these settings with your choice of exposure compensation. Shooting in [ ] mode, with control over each of these parameters, is equivalent to shooting in [ ], [ ], [ ], or [...
Page 107 Set the amount of exposure compensation. Turn the < > dial and select the exposure level indicator. [ appears to the left of the exposure level indicator. Turn the < > dial to set the option. To reset the setting to [±0], press the < >...
Page 108 Note Values for shutter speed, aperture value, and ISO speed that are set to [AUTO] are underlined. You can set shutter speed, aperture value, and ISO speed to [AUTO] and exposure compensation amount to [±0] in step 2 or 3 by holding down the < >...
Page 109 P: Program AE The camera automatically sets the shutter speed and aperture value to suit the subject’s brightness. * [ ] stands for Program. * AE stands for Auto Exposure. Set the shooting mode to [ ]. Press the < >...
Page 110 Check the display. As long as the exposure value is not blinking, standard exposure will be obtained. Take the picture. Compose the shot and press the shutter button completely. Caution If the “30"” shutter speed and the lowest aperture value blink, it indicates underexposure.
Page 111 Note Differences between [ ] and [ ] modes ] mode limits available functions and sets the AF method, metering mode, and many other functions automatically to prevent bad shots. In contrast, [ ] mode only sets the shutter speed and aperture value automatically, and you can freely set the AF method, metering mode, and other functions.
Page 112 Tv: Shutter-Priority AE In this mode, you set the shutter speed and the camera automatically sets the aperture value to obtain the standard exposure matching the brightness of the subject. A faster shutter speed can freeze the action of a moving subject. A slower shutter speed can create a blurred effect, giving the impression of motion.
Page 113 Set the desired shutter speed. Turn the < > dial to set it. Focus on the subject. Press the shutter button halfway. The aperture value is set automatically. Check the display and shoot. As long as the aperture value is not blinking, the standard exposure will be obtained.
Page 114 Note Shutter speed display For example, “0"5” indicates 0.5 sec. and “15"”, 15 sec. Shutter speeds from “8000” to “4” on the LCD panel indicate the denominator of the fractional shutter speed.
Page 115 Av: Aperture-Priority AE Depth-of-Field Preview In this mode, you set the desired aperture value and the camera sets the shutter speed automatically to obtain the standard exposure matching the subject brightness. A higher f/ number (smaller aperture hole) will make more of the foreground and background fall within acceptable focus.
Page 116 Set the desired aperture value. Turn the < > dial to set it. Focus on the subject. Press the shutter button halfway. The shutter speed is set automatically. Check the display and shoot. As long as the shutter speed is not blinking, the standard exposure will be obtained.
Page 117 Note Aperture value display The higher the value, the smaller the aperture opening will be. The aperture value displayed varies depending on the lens. If no lens is attached to the camera, “F00” will be displayed for the aperture.
Page 118 Depth-of-Field Preview Press the depth-of-field preview button to stop down the lens to the current aperture value setting and check the area in focus (depth of field). Note The larger the aperture value, the wider the area in focus, from the foreground to the background.
Page 119 M: Manual Exposure Exposure Compensation with ISO Auto In this mode, you set both the shutter speed and aperture value as desired. To determine the exposure, refer to the exposure level indicator or use a commercially available exposure meter. ] stands for Manual. Set the shooting mode to [ Press the <...
Page 120 Focus on the subject. Press the shutter button halfway. Check the exposure level mark [ ] to see how far the current exposure level is from the standard exposure level. (1) Standard exposure index (2) Exposure level mark Set the exposure and take the picture. Check the exposure level indicator and set the desired shutter speed and aperture value.
Page 121 Note In [ ] mode with ISO Auto, [ ] (evaluative metering), and [ : AE lock meter. mode after focus] set to the default setting ( ), holding down the shutter button halfway locks the ISO speed after the camera focuses with One-Shot AF. When ISO Auto is set, you can press the <...
Page 122 BULB: Long (Bulb) Exposures Bulb Timer In this mode, the shutter stays open as long as you hold down the shutter button completely, and closes when you let go of the shutter button. Use bulb exposures for night scenes, fireworks, astrophotography, and other subjects requiring long exposures. Set the shooting mode to [ Press the <...
Page 123 Take the picture. The exposure will continue for as long as you keep the shutter button pressed completely. Elapsed exposure time is displayed on the LCD panel. Caution Do not point the camera toward an intense light source, such as the sun or an intense artificial light source.
Page 124 Select [ : Bulb timer]. Select [Enable]. Select [Enable], then press the < > button. Set the exposure time. Select an option (hours : minutes : seconds). Press < > to display [ ]. Set a value, then press < >.
Page 125 Select [OK]. Take the picture. After you press the shutter button completely, the bulb exposure continues for your specified time. ] and the exposure time are displayed on the LCD panel during bulb timer shooting. To clear the timer setting, select [Disable] in step 2. Caution Bulb exposure stops if you press the shutter button completely and release it during the timer.
Page 126 Shooting and Recording This chapter describes shooting and recording and introduces menu settings on the shooting ([ ]) tab. • Still Photo Shooting • Movie Recording...
Page 127 Still Photo Shooting To prepare for still photo shooting, press the < > button, then press the < > button to access the [Shooting mode] screen shown here. to the right of titles indicates functions only available in [ ], [ ], [ ], [ ], [ ], or...
Page 128 • HDR Mode • Focus Bracketing • Interval Timer Shooting • Shutter Mode • Releasing Shutter without Card • Image Stabilizer (IS Mode) • Shooting with the Touch Shutter • Image Review • High-Speed Display • Metering Timer • Exposure Simulation •...
Page 129 Tab Menus: Still Photo Shooting Shooting 1 Image quality Dual Pixel RAW Cropping/aspect ratio Shooting 2 Expo.comp./AEB ISO speed settings HDR PQ settings Auto Lighting Optimizer Highlight tone priority Anti-flicker shoot. External Speedlite control...
Page 130 Shooting 3 White balance Custom White Balance WB Shift/Bkt. Color space (5) Picture Style • Picture Style Selection • Picture Style Customization • Picture Style Registration Clarity Lens aberration correction Shooting 4 Long exp. noise reduction High ISO speed NR Dust Delete Data...
Page 131 Shooting 5 Multiple exposure HDR Mode Focus bracketing Shooting 6 Interval timer Bulb timer Shutter mode Release shutter without card...
Page 132 Shooting 7 IS (Image Stabilizer) mode Touch Shutter Image review High speed display Metering timer Expo. simulation Shooting info. disp. Shooting 8 VF display format Disp. performance Caution : IS (Image Stabilizer) mode] is not displayed in [ ], [ ], [ ], [ ], [ or [...
Page 133 In [ ] mode, the following screens are displayed. Shooting 1 Image quality Dual Pixel RAW Cropping/aspect ratio Shooting 2 Interval timer Release shutter without card...
Page 134 Shooting 3 IS (Image Stabilizer) mode Touch Shutter Image review Shooting info. disp. VF display format Disp. performance Shooting 4 Movie rec quality Sound recording...
Page 135 Image Quality RAW Images Guide to Image Quality Settings Maximum Burst for Continuous Shooting You can select the pixel count and the image quality. JPEG and HEIF image quality options include , and RAW image quality options include Select [ : Image quality].
Page 136 Set the image quality. Standard/Auto switch card/Record to multiple For RAW images, turn the < > dial, and for JPEG images, turn the < > dial. Press < > to set it. Record separately When [ Record func.] in [ : Record func+card/folder sel.] is set to [Rec.
Page 137 Note HEIF can be specified when [HDR shooting ] in [ : HDR PQ settings] is set to [Enable]. You can convert these images to JPEG images after shooting ( is set if you set both RAW and JPEG/HEIF to [ Two versions of each shot are recorded at your specified image quality when you have selected both RAW and JPEG/HEIF.
Page 138 RAW images captured by this camera. If a previous version of DPP Ver. 4.x is installed on your computer, obtain and install the latest version of DPP from the Canon website to update it ( ), which will overwrite the previous version.
Page 139 Guide to Image Quality Settings Still photo file size / Number of possible shots / Maximum burst for continuous shooting for details on file size, number of shots available, maximum burst, and other estimated values.
Page 140 Maximum Burst for Continuous Shooting The approximate maximum burst is displayed at the upper left of the shooting screen and lower right of the viewfinder. Note If the maximum burst is displayed as “99”, it indicates that you can shoot 99 or more shots continuously.
Page 141 Dual Pixel RAW Shooting images with this feature enabled produces special Dual Pixel RAW images containing dual pixel information from the image sensor. This is called Dual Pixel RAW shooting. When processing these images on the camera, you can adjust the images by applying portrait relighting ( ) and background clarity ( When processing the images in Digital Photo Professional software for EOS cameras, you...
Page 142 Caution Startup takes longer when the power switch is set to < > or the camera resumes operation from auto power off. Continuous shooting speed is slower when you shoot with Dual Pixel RAW ( Maximum burst is also lower. ] and [ ] drive modes are not available.
Page 143 Still Photo Cropping/Aspect Ratio Normally with RF or EF lenses, images are captured at the sensor size of approx. 36.0×24.0mm in full-frame shooting, but in cropped shooting, you can isolate and magnify the center of the image approx. 1.6 (APS-C size) as if using a telephoto lens, or you can set an aspect ratio as needed before shooting.
Page 144 Select how the shooting area is displayed. On the screen in step 2, press the < > button. Select the type of display, then press < >. Caution image quality options are not available when [1.6x (crop)] is set, or with EF-S lenses. Shooting with [1.6x (crop)] and image quality set to produces images, respectively.
Page 145 Take the picture. Setting examples When is set When is set or an EF-S lens is used When is set When is set...
Page 146 When [1.6x (crop)] is set or an EF-S lens is used, an image magnified approx. 1.6× is displayed. When [1:1 (aspect ratio)], [4:3 (aspect ratio)], or [16:9 (aspect ratio)] is set, the image within the black masked or outlined area is captured. Caution Areas outside the cropped area are not recorded in RAW shooting when [1.6x (crop)] is set, or with EF-S lenses.
Page 147 Auto Exposure Bracketing (AEB) In exposure bracketing, three consecutive images are captured at different exposures within your specified range of up to ±3 stops (in 1/3-stop increments) by automatically adjusting the shutter speed, aperture value, or ISO speed. * AEB stands for Auto Exposure Bracketing. Select [ : Expo.comp./AEB].
Page 148 Take the picture. Standard exposure Decreased exposure Increased exposure Three bracketed shots are taken, according to the specified drive mode, in this sequence: Standard exposure, decreased exposure, and increased exposure. AEB will not be automatically canceled. To cancel AEB, follow step 2 to turn off the AEB range display.
Page 149 ISO Speed Settings for Still Photos ISO Speed Range When Set Manually ISO Speed Range Used with ISO Auto Minimum Shutter Speed for ISO Auto Set the ISO speed (image sensor’s sensitivity to light) to suit the ambient light level. In [ mode, ISO speed is set automatically.
Page 150 Note ISO speed can also be set in the ISO speed item by pressing the < > button with an image displayed on the screen. Can also be set on the [ISO speed] screen in [ ISO speed settings]. To expand the available ISO speed range from L (equivalent to ISO 50) to H (equivalent to ISO 102400), adjust [ISO speed range] in [ ISO speed settings] (...
Page 151 ISO Speed Range When Set Manually You can set the manual ISO speed setting range (minimum and maximum limits). You can set the minimum limit within L (equivalent to ISO 50) to ISO 51200, and the maximum limit within ISO 100 to H (equivalent to ISO 102400). Select [ ISO speed settings].
Page 152 Set [Maximum]. Select the [Maximum] box, then press < >. Select the ISO speed, then press < >. Select [OK].
Page 153 ISO Speed Range Used with ISO Auto You can set the automatic ISO speed range for ISO Auto within ISO 100–51200. The minimum can be set within ISO 100–25600 and the maximum within ISO 200–51200, in 1- stop increments. Select [Auto range]. Set [Minimum].
Page 154 Set [Maximum]. Select the [Maximum] box, then press < >. Select the ISO speed, then press < >. Select [OK]. Note The [Minimum] and [Maximum] settings will also function as the minimum and maximum speeds for ISO speed safety shift (...
Page 155 Minimum Shutter Speed for ISO Auto To prevent shutter speeds from being set too low automatically, you can set the minimum shutter speed for ISO Auto. This is effective in [ ] or [ ] mode when shooting subjects in motion with a wide-angle lens, or when using a telephoto lens.
Page 156 Set the desired minimum shutter speed. Auto If you select [Auto], turn the < > dial to set the difference relative to standard speed (toward Slower or Faster), then press < >. Manual If you select [Manual], turn the < >...
Page 157 HDR PQ Settings PQ in HDR PQ refers to the gamma curve of the input signal for displaying HDR images. HDR PQ settings enable the camera to produce HDR images conforming to the PQ specification defined in ITU-R BT.2100 and SMPTE ST.2084. (Actual display depends on monitor performance.) Shots are captured as HEIF or RAW images.
Page 158 Set [HDR assist disp: shooting]. On the screen, converted images are displayed that resemble how the images would look on an HDR display device. Select [Exposure prior. (mid-tones)] or [Tones prior. (highlights)]. ] Exposure prior. (mid-tones) Provides reference display that emphasizes exposure of subjects (such as people) with intermediate brightness.
Page 159 Set [HDR assist disp: playback]. Converted images are displayed on the screen for playback, giving an impression similar to how they would appear on an HDR display device. Select [Exposure prior. (mid-tones)] or [Tones prior. (highlights)]. ] Exposure prior. (mid-tones) Provides reference display that emphasizes exposure of subjects (such as people) with intermediate brightness.
Page 160 Caution Expanded ISO speeds (L, H) are not available in HDR shooting. Some scenes may look different from how they appear on an HDR display device. Histograms of images captured with [HDR shooting ] set to [Enable] are not based on images as converted for HDR assist display. Image areas shown in gray in the histogram roughly indicate signal values that are not used.
Page 161 Auto Lighting Optimizer Brightness and contrast can be corrected automatically if shots look dark or contrast is too low or high. In [ ] mode, [Standard] is set automatically. Select [ : Auto Lighting Optimizer]. Set a correction option. Caution Noise may increase and apparent resolution may change, under some shooting conditions.
Page 162 Note images, face lighting can be adjusted in [ : RAW processing (RAW/DPRAW)] ( To enable [ : Auto Lighting Optimizer] to be set even in [ ] and [ ] modes, press the < > button in step 2 to clear the checkmark [ ] for [Disabled in M or B modes].
Page 163 Highlight Tone Priority You can reduce overexposed, clipped highlights. Select [ : Highlight tone priority]. Set an option. [Enable]: Improves gradation in highlights. The gradation between the grays and highlights becomes smoother. [Enhanced]: Reduces overexposed highlights even more than [Enable], under some shooting conditions. Caution Noise may increase slightly.
Page 164 Anti-Flicker Shooting Uneven exposure and color may result if you shoot at fast shutter speeds under flickering light sources such as fluorescent lights, due to uneven vertical exposure. Anti-flicker shooting enables you to take pictures when exposure and colors are less affected by flickering.
Page 165 Caution When [Enable] is set and you shoot under a flickering light source, the shutter- release time lag may become longer. Also, the continuous shooting speed may become slower, and the shooting interval may become irregular. Flicker at a frequency other than 100 Hz or 120 Hz cannot be detected. Also, if the flickering frequency of the light source changes during continuous shooting, effects of the flicker cannot be reduced.
Page 166 Shooting with Speedlites EL/EX Series Speedlites for EOS Cameras Canon Speedlites Other Than the EL/EX Series Non-Canon Flash Units EL/EX Series Speedlites for EOS Cameras Features of EL/EX series Speedlites (sold separately) can be used in flash photography with the camera.
Page 167 Note The Speedlite will automatically fire an AF-assist beam as needed, if autofocusing is difficult under low light. You can also set flash exposure compensation on the Quick Control screen ( ) or in the [Flash function settings] setting of [ : External Speedlite control] ( The camera can turn on certain Speedlites automatically when the camera is turned on.
Page 168 Canon Speedlites Other Than the EL/EX Series With an EZ/E/EG/ML/TL series Speedlite set to A-TTL or TTL autoflash mode, the flash can be fired at full output only. Set the camera’s shooting mode to [ ] or [ ] and adjust the aperture value before shooting.
Page 169 Non-Canon Flash Units Sync speed The camera can synchronize with non-Canon compact flash units at up to 1/250 sec. (or up to 1/200 sec. with [ : Shutter mode] set to [Mechanical]). With large studio flash units, the flash duration is longer than that of a compact flash unit and varies depending on the model.
Page 170 Flash Function Settings Flash Firing E-TTL Balance E-TTL II Flash Metering Continuous Flash Control Slow Synchro Flash Function Settings Flash Custom Function Settings Clearing Flash Function Settings/Clearing All Speedlite Custom Functions Functions of EL/EX Series Speedlites compatible with flash function settings can be set via a camera menu screen.
Page 171 Select an option. Flash Firing To enable flash photography, set to [Enable]. To enable only the AF-assist beam of the Speedlite, set to [Disable].
Page 172 E-TTL Balance You can set your preferred appearance (balance) for flash shots. This setting enables you to adjust the ratio of ambient light to Speedlite light output. Set the balance to [Ambience priority] to lower the proportion of flash output and uses ambient light to produce lifelike shots with a natural mood.
Page 173 E-TTL II Flash Metering Set to [Eval (FacePrty)] for flash metering suitable for shots of people. The continuous shooting speed for high-speed continuous shooting is slower than when [Evaluative] or [Average] is selected. Set to [Evaluative] for flash metering that emphasizes firing in continuous shooting. If [Average] is set, the flash exposure will be averaged for the entire metered scene.
Page 174 Continuous Flash Control Set to [E-TTL each shot] to perform flash metering for each shot. Set to [E-TTL 1st shot] to perform flash metering for only the first shot before continuous shooting. The flash output level for the first shot is applied to all subsequent shots. Useful when prioritizing continuous shooting speed without recomposing shots.
Page 175 Slow Synchro You can set the flash-sync speed for flash photography in [ ] or [ ] mode. Note that the maximum flash synchronization speed varies depending on the [ : Shutter mode] setting. It is 1/250 sec. when set to [Elec. 1st-curtain] and 1/200 sec. when set to [Mechanical]. : 1/250-30sec.
Page 176 Flash Function Settings The information displayed on the screen, position of display, and available options vary depending on the Speedlite model, its Custom Function settings, the flash mode, and other factors. For details on the Speedlite’s functions, refer to the Speedlite’s Instruction Manual. Sample display Flash mode Wireless functions/...
Page 177 Flash mode You can select the flash mode to suit your desired flash photography. [E-TTL II flash metering] is the standard mode of EL/EX series Speedlites for automatic flash photography. [Manual flash] is for setting the Speedlite’s [Flash output level] yourself. [CSP] (Continuous shooting priority mode) is available when using a compatible Speedlite.
Page 178 Wireless functions You can use radio or optical wireless transmission to shoot with wireless multiple-flash lighting. For details on wireless flash, refer to the Instruction Manual of a Speedlite compatible with wireless flash photography. Firing ratio control (RATIO) With a macro flash, you can set the firing ratio control. For details on firing ratio control, refer to the Instruction Manual of the macro flash.
Page 179 Shutter synchronization Normally, set this to [First-curtain synchronization] so that the flash fires immediately after the shooting starts. Set to [Second-curtain synchronization] and use low shutter speeds for natural-looking shots of subject motion trails, such as car headlights. Set to [High-speed synchronization] for flash photography at higher shutter speeds than the maximum flash sync shutter speed.
Page 180 Flash exposure bracketing Speedlites equipped with flash exposure bracketing (FEB) can change the external flash output automatically as three shots are taken at once.
Page 181 Flash Custom Function Settings For details on the Speedlite’s Custom Functions, refer to the Instruction Manual of the Speedlite. Select [Flash C.Fn settings]. Set the desired functions. Select the number. Select an option. Caution With an EX series Speedlite, the Speedlite will always fire at full output if the [Flash metering mode] Custom Function is set to [TTL flash metering] (autoflash).
Page 182 Clearing Flash Function Settings/Clearing All Speedlite Custom Functions Select [Clear settings]. Select the settings to be cleared. Select [Clear flash settings] or [Clear all Speedlite C.Fn's]. Select [OK] on the confirmation screen to clear all flash settings or Custom Function settings.
Page 183 White Balance White Balance ] Auto White Balance ] Custom White Balance ] Color Temperature White balance (WB) is for making the white areas look white. Normally, the Auto [ (Ambience priority) or [ ] (White priority) setting will obtain the correct white balance. If natural-looking colors cannot be obtained with Auto, you can select the white balance to match the light source or set it manually by shooting a white object.
Page 184 Select a white balance setting. Turn the < > dial to make a selection. Note For [ ] and [ ] setting instructions, see ] Auto White Balance. To set your preferred color temperature, select [ ] in [ : White balance], then turn the <...
Page 185 White Balance The human eye adapts to changes in lighting so that white objects look white under all kinds of lighting. Digital cameras determine white from the color temperature of lighting and, based on this, apply image processing to make color tones look natural in your shots.
Page 186 ] Auto White Balance With [ ] (Ambience priority), you can slightly increase the intensity of the image’s warm color cast when shooting a tungsten-light scene. If you select [ ] (White priority), you can reduce the intensity of the image’s warm color cast.
Page 187 Caution Precautions when set to [ ] (White priority) The warm color cast of subjects may fade. When multiple light sources are included in the scene, the warm color cast of the picture may not be reduced. When using flash, the color tone will be the same as with [ ] (Ambience priority).
Page 188 ] Custom White Balance With custom white balance, you can manually set the white balance for the specific light source of the shooting location. Make sure to perform this procedure under the light source at the actual location of the shoot. Shoot a white object.
Page 189 Import the white balance data. Turn the < > dial to select the image captured in step 1, then press < >. Select [OK] to import the data. Select [ : White balance]. Select the custom white balance. Select [ Caution If the exposure obtained in step 1 differs greatly from the standard exposure, a correct white balance may not be obtained.
Page 190 Note Instead of shooting a white object, you can also shoot a gray card or standard 18% gray reflector (commercially available).
Page 191 ] Color Temperature A value can be set representing the white balance color temperature. Select [ : White balance]. Set the color temperature. Select [ Turn the < > dial to set a color temperature, then press < >. The color temperature can be set from approx. 2500K to 10000K in 100K increments.
Page 192 White Balance Correction White Balance Correction White Balance Auto Bracketing You can correct the white balance that is set. This adjustment will have the same effect as using a commercially available color temperature conversion filter or color compensating filter. White Balance Correction Select [ : WB Shift/Bkt.].
Page 193 Set the white balance correction. Sample setting: A2, G1 Use < > to move the “■” mark on the screen to your preferred position. B is for blue, A for amber, M for magenta, and G for green. White balance is corrected in the direction you move the mark. On the right of the screen, [Shift] indicates the direction and correction amount, respectively.
Page 194 White Balance Auto Bracketing White balance bracketing enables you to capture three images at once with different color tones. Setting the white balance bracketing amount In step 2 for White Balance Correction, when you turn the < > dial, the “■” mark on the screen will change to “■...
Page 195 Note The images will be bracketed in the following sequence: 1. Standard white balance, 2. Blue (B) bias, and 3. Amber (A) bias, or 1. Standard white balance, 2. Magenta (M) bias, and 3. Green (G) bias. You can also set white balance correction and AEB together with white balance bracketing.
Page 196 Color Space The range of reproducible colors is called the “color space.” For normal shooting, sRGB is recommended. In [ ] mode, [sRGB] is set automatically. Select [ : Color space]. Set a color space option. Select [sRGB] or [Adobe RGB], then press < >.
Page 197 Picture Style Selection Picture Style Characteristics Symbols Just by selecting a preset Picture Style, you can obtain image characteristics effectively matching your photographic expression or the subject. In [ ] mode, [ ] (Auto) is set automatically. Select [ : Picture Style]. Select a Picture Style.
Page 198 Picture Style Characteristics Auto The color tone will be adjusted automatically to suit the scene. The colors will look vivid for blue skies, greenery and sunsets, particularly in nature, outdoor, and sunset scenes. Note If the desired color tone is not obtained with [Auto], use another Picture Style. Standard The image looks vivid, sharp, and crisp.
Page 199 User Def. 1–3 You can add a new style based on presets such as [Portrait] or [Landscape] or a Picture Style file, then adjust it as needed ( ). With any User Defined Picture Style that has not yet been registered, pictures will be taken with the same characteristics settings as with the default settings of [Standard].
Page 200 Symbols Icons on the Picture Style selection screen represent [Strength], [Fineness], and [Threshold] for [Sharpness] as well as [Contrast] and other parameters. The numbers indicate the values for these settings specified for the respective Picture Style. Sharpness Strength Fineness Threshold Contrast Saturation Color tone...
Page 201 Picture Style Customization Settings and Effects Monochrome Adjustment You can customize any Picture Style by changing it from the default settings. For details on customizing [Monochrome], see Monochrome Adjustment. Select [ : Picture Style]. Select a Picture Style. Select the Picture Style to adjust, then press the < >...
Page 202 Select an option. Select an option, then press < >. For details on settings and effects, see Settings and Effects. Set the effect level. Adjust the effect level, then press < >. Press the < > button to save the adjusted setting and return to the Picture Style selection screen.
Page 203 Note For movie recording, [Fineness] and [Threshold] for [Sharpness] cannot be set (not displayed). By selecting [Default set.] in step 3, you can restore the parameter settings of the respective Picture Style to the defaults. To shoot with the Picture Style you adjusted, first select the adjusted Picture Style, then shoot.
Page 204 Monochrome Adjustment Filter effect With a filter effect applied to a monochrome image, you can make white clouds or green trees stand out more. Filter Sample Effects N:None Normal black-and-white image with no filter effects. Ye:Yellow Blue sky will look more natural, and white clouds will look crisper. Or:Orange The blue sky will look slightly darker.
Page 205 Picture Style Registration You can select a base Picture Style such as [Portrait] or [Landscape], adjust it as desired, and register it under [User Def. 1] – [User Def. 3]. Useful when creating several Picture Styles with different settings. Picture Styles that you have registered on the camera using EOS Utility (EOS software, can also be modified here.
Page 206 Press < >. With [Picture Style] selected, press < >. Select a base Picture Style. Select the base Picture Style, then press < >. Also select styles this way when adjusting styles registered to the camera with EOS Utility (EOS software). Select an option.
Page 207 Set the effect level. Adjust the effect level, then press < >. For details, see Picture Style Customization. Press the < > button to save the adjusted setting and return to the Picture Style selection screen. The base Picture Style will be indicated on the right of [User Def. *]. Blue style names in [User Def.
Page 208 Clarity You can adjust image clarity, as determined by the contrast of image edges. Set toward the negative end to make images look softer or toward the positive end for a sharper appearance. Select [ : Clarity]. Set the effect level. Caution Setting clarity may darken or lighten the areas around boundaries in high-contrast images.
Page 209 Lens Aberration Correction Peripheral Illumination Correction Distortion Correction Digital Lens Optimizer Chromatic Aberration Correction Diffraction Correction Vignetting, image distortion, and other issues may be caused by lens optical characteristics. The camera can compensate for these phenomena by using [Lens aberration correction]. Select [ : Lens aberration correction].
Page 210 Select a setting. Confirm that the name of the attached lens and (except for diffraction correction) [Correction data available] are displayed. If [Correction data not available] or [ ] is displayed, see Digital Lens Optimizer. Caution Not available when shooting multiple exposures. Peripheral Illumination Correction Vignetting (dark image corners) can be corrected.
Page 211 Distortion Correction Distortion (image warping) can be corrected. Caution To correct distortion, the camera captures a narrower image area than the area seen in viewfinder shooting, which crops the image a little and slightly lowers the apparent resolution. Applying distortion correction may change the angle of view slightly. The amount of image cropped may vary between still photos and movies.
Page 212 Digital Lens Optimizer Various aberrations from lens optical characteristics can be corrected, along with diffraction and low-pass filter-induced loss of resolution. If [Correction data not available] or [ ] is displayed by [Digital Lens Optimizer], you can use EOS Utility to add the lens correction data to the camera. For details, refer to the EOS Utility Instruction Manual.
Page 213 Chromatic Aberration Correction Chromatic aberration (color fringing around subjects) can be corrected. Note [Chromatic aberr corr] is not displayed when [Digital Lens Optimizer] is set to [Standard] or [High].
Page 214 General precautions for lens aberration correction Lens aberration correction cannot be applied to existing JPEG images. When using a non-Canon lens, setting the corrections to [Disable] is recommended even if [Correction data available] is displayed. Magnifying the periphery of the image may display parts of the image that will not be recorded.
Page 215 Note General notes for lens aberration correction Effects of lens aberration correction vary by lens and shooting conditions. Also, the effect may be difficult to discern depending on the lens used, shooting conditions, etc. If the correction is difficult to discern, magnifying and checking the image after shooting is recommended.
Page 216 Long Exposure Noise Reduction Noise that tends to occur in long exposures at shutter speeds of one sec. or slower can be reduced. Select [ : Long exp. noise reduction]. Set a reduction option. Auto For images exposed for 1 sec. or longer, noise reduction is performed automatically if noise typical of long exposures is detected.
Page 217 Caution With [Auto] or [Enable] set, noise reduction after you shoot may take as long as exposure for the shot. Images may look grainier with the [Enable] setting than with the [Disable] or [Auto] setting. [BUSY] is displayed as noise is reduced, and the shooting screen is not displayed until processing is finished, when you can shoot again.
Page 218 High ISO Speed Noise Reduction You can reduce the image noise generated. This function is especially effective when shooting at high ISO speeds. When shooting at low ISO speeds, the noise in the darker parts of the image (shadow areas) can further be reduced. Select [ : High ISO speed NR].
Page 219 Caution Precautions on Multi Shot Noise Reduction If there is significant misalignment in the image due to camera shake, the noise reduction effect may become smaller. Be careful about camera shake in handheld shots. Using a tripod is recommended. If you shoot a moving subject, the moving subject may leave afterimages. Auto image alignment may not function properly with repetitive patterns (lattice, stripes, etc.) or flat, single-tone images.
Page 220 Dust Delete Data Acquisition Preparation Dust Delete Data Appending Dust Delete Data used to erase dust spots can be appended to images in case sensor cleaning leaves dust on the sensor. The Dust Delete Data is used by Digital Photo Professional (EOS software) to erase the dust spots automatically.
Page 221 Select [OK]. After the automatic self-cleaning of the sensor is performed, a message will appear. Although there will be a mechanical sound of the shutter during the cleaning, no picture is taken.
Page 222 Shoot a plain white object. Shoot with a plain white object (such as a new sheet of white paper) filling the screen, at a distance of 20–30 cm (0.7–1.0 ft.). Since the image will not be saved, the data can still be obtained even if there is no card in the camera.
Page 223 Dust Delete Data Appending The camera will append the Dust Delete Data obtained to all shots from now on. Acquiring Dust Delete Data before shooting is recommended. For details about using Digital Photo Professional (EOS software) to erase dust spots automatically, refer to the Digital Photo Professional Instruction Manual.
Page 224 Multiple Exposures Merging Multiple Exposures with a RAW Image Recorded on the Card Checking and Deleting Multiple Exposures During Shooting As you shoot multiple exposures (2–9), you can see how the images will be merged into a single image. Select [ : Multiple exposure].
Page 225 Set [Multiple exposure]. Select an option, then press < >. To exit shooting multiple exposures, select [Disable]. On:Func/Ctrl Convenient when shooting multiple exposures gradually as you check the results. During continuous shooting, the continuous shooting speed will decrease greatly. On:ContShtng Used for continuous multiple exposures of moving subjects.
Page 226 Set [Multi-expos ctrl]. Select a merging option, then press < >. Additive The exposure of each single image captured is added cumulatively. Based on [No. of exposures], set negative exposure compensation. Follow these basic guidelines to set the exposure compensation amount.
Page 227 Set [No. of exposures]. Select the number of exposures, then press < >. Specify the images to save. To save all single exposures and the multiple-exposure image, select [All images] and press < >. To save only the multiple-exposure image, select [Result only] and press <...
Page 228 Set [Continue Mult-exp]. Select an option, then press < >. With [1 shot only], multiple-exposure shooting will be canceled automatically after the shooting ends. With [Continuously], multiple-exposure shooting continues until the setting in step 2 is set to [Disable]. Shoot the first exposure. When [On:Func/Ctrl] is set, the captured image will be displayed.
Page 229 Shoot the next exposures. Images captured so far are displayed merged. For only image display, press the < > button repeatedly. As you shoot, you can view the multiple-exposure image so far, check exposure, and see how the images will be merged by holding down the depth-of-field preview button (or the button assigned to [Depth-of-field preview] in [ : Customize buttons]).
Page 230 Caution The image quality, ISO speed, Picture Style, high ISO speed noise reduction, color space, etc. set for the first single exposure will also be set for the subsequent exposures. If [ : Picture Style] is set to [Auto], [Standard] will be applied for shooting. With [On:Func/Ctrl] and [Additive] set, any noise, irregular colors, banding, or similar issues affecting images displayed as you shoot may look different in the final multiple-exposure image.
Page 231 Select the first image. Turn the < > dial to select the first image, then press < >. Select [OK]. The file number of the selected image will be displayed at the bottom of the screen. Take the picture. When you select the first image, the number of remaining exposures as set with [No.
Page 232 Note You can also select a RAW image used in multiple-exposure shooting. Select [Deselect img] to cancel image selection.
Page 233 Checking and Deleting Multiple Exposures During Shooting To view the multiple-exposure image so far, check exposure, and see how the images are merged, you can press the < > button before you finish shooting your specified number of exposures (when [On:Func/Ctrl] is set, but not with [On:ContShtng]). Pressing the <...
Page 234 How are multiple-exposure files numbered? With the camera set to save all images, multiple-exposure image files are named with the next number after the number of the last single exposure used to create them. Will auto power off take effect during multiple-exposure shooting? During multiple-exposure shooting, auto power off will not take effect.
Page 235 HDR Mode Effects You can shoot still photos with clipped highlights and shadows reduced for a high dynamic range of tones even in high-contrast scenes. HDR shooting is effective for landscape and still-life shots. With HDR shooting, three images of different exposures (standard exposure, underexposure, and overexposure) are captured consecutively for each shot and then merged together automatically.
Page 236 Set [Effect]. Effects for details on the settings and effects. Set [Continuous HDR]. With [1 shot only], HDR shooting is canceled automatically after you finish shooting. With [Every shot], HDR shooting continues until the setting in step 2 is set to [Disable HDR]. Set [Auto Image Align].
Page 237 Specify the images to save. To save the three images captured and the resulting HDR image, select [All images]. To save only the HDR image, select [HDR img only]. Take the picture. When you press the shutter button completely, three consecutive images will be captured, and the HDR image will be recorded to the card.
Page 238 Caution RAW HDR images are captured in JPEG image quality. RAW+JPEG HDR images are captured in the specified JPEG image quality. Expanded ISO speeds (L, H) are not available in HDR shooting. HDR shooting is possible within ISO 100–51200 (varies depending on the settings of [Minimum] and [Maximum] for [ISO speed range]).
Page 239 Effects ] Natural For images preserving a wide tonal range where the highlight and shadow details would otherwise be lost. Clipped highlights and shadows will be reduced. ] Art standard While the clipped highlights and shadows will be reduced more than with [Natural], the contrast will be lower, and the gradation flatter to have the picture look like a painting.
Page 240 Focus Bracketing Focus bracketing enables continuous shooting with the focal distance changed automatically after a single shot. From these images, you can create a single image in focus over a wide area by using an application that supports depth compositing, such as Digital Photo Professional (EOS software).
Page 241 Set [Number of shots]. Specify the number of images captured per shot. Can be set in a range of [2]–[999]. Set [Focus increment]. Specify how much to shift the focus. This amount is automatically adjusted to suit the aperture value at the time of shooting. Larger aperture values increase the focus shift and make focus bracketing cover a wider range under the same focus increment and number of shots.
Page 242 Set [Exposure smoothing]. You can suppress changes in image brightness during focus bracketing by setting [Exposure smoothing] to [Enable], which compensates for differences between the displayed and actual aperture value (effective f/number), which varies by focal position. Take the picture. To save your shots in a new folder, tap [ ] and select [OK].
Page 243 Shooting with a wider angle of view is recommended. After depth compositing, you can crop the image if necessary. For details on lenses compatible with this feature, visit the Canon website. Set [Exposure smoothing] to [Disable] with the following lenses, because they may cause changes in image brightness.
Page 244 Interval Timer Shooting With the interval timer, you can set the shooting interval and number of shots, so that the camera takes individual shots repeatedly according to your interval until your specified number of shots are taken. Select [ : Interval timer]. Select [Enable].
Page 245 Set the shooting interval and number of shots. Select an option to set (hours : minutes : seconds / number of shots). Press < > to display [ ]. Set the desired number, then press < >. (Returns to [ Interval Can be set in a range of [00:00:01]–[99:59:59].
Page 246 Take the picture. First shot is taken and shooting continues according to the interval timer settings. During interval timer shooting, [ ] will blink. After the set number of shots are taken, the interval timer shooting will stop and be automatically canceled. Note Using a tripod is recommended.
Page 247 Caution Do not point the camera toward an intense light source, such as the sun or an intense artificial light source. Doing so may damage the image sensor or the camera’s internal components. Setting the lens’s focus mode switch to < >...
Page 248 Shutter Mode You can choose the method of shutter release. Select [ : Shutter mode]. Select an option. Mechanical Shooting activates the mechanical shutter. Recommended when shooting with the aperture of a bright lens wide open. Elec. 1st-curtain Shooting only activates the second-curtain shutter. Electronic Enables you to shoot without a shutter sound.
Page 249 Zooming during continuous shooting may cause changes in exposure even at the same f/number. For details, refer to the Canon website. [Elec. 1st-curtain] is used for bulb exposures. AEB shooting and flash photography are not available.
Page 250 Releasing Shutter without Card You can set the camera not to shoot unless there is a card in the camera. The default setting is [Enable]. Select [ : Release shutter without card]. Select [Disable].
Page 251 Image Stabilizer (IS Mode) Focal Length Image stabilization by the camera reduces camera shake in still photo shooting. It can provide effective stabilization even when your lens is not equipped with Image Stabilizer. When using a lens equipped with Image Stabilizer, set the lens’s Image Stabilizer switch to <...
Page 252 Select [Still photo IS]. [Always]: Provides constant image stabilization. [Only for shot]: Image stabilization is active only at the moment of shooting. Caution : IS (Image Stabilizer) mode] is not displayed in [ ], [ ], [ ], [ ], [ or [ ] shooting mode when an IS-equipped lens is attached.
Page 253 Select [Focal length]. Set the focal length. Turn the < > dial to select the digit of the focal length. Press < > to display [ ]. Set the desired number, then press < >. (Returns to [ Select [OK]. Caution Set [ : Release shutter w/o lens] to [Enable].
Page 254 Shooting with the Touch Shutter Just by tapping the screen, you can focus and take the picture automatically. Enable the Touch Shutter. Tap [ ] in the lower left of the screen. Each time you tap the icon, it will toggle between [ ] and [ ] (Touch Shutter: Enable) The camera will focus on the spot you tap, then the picture will be...
Page 255 Tap the screen to shoot. Tap the face or subject on the screen. On the point you tap, the camera focuses (Touch AF) with your specified method. When [ ] is set, the AF point turns green when focus is achieved, then the picture is taken automatically.
Page 256 Image Review Review Duration Viewfinder Review Review Duration To keep the image displayed immediately after you shoot, set to [Hold], and if you prefer not to have the image displayed, set to [Off]. Select [ : Image review]. Select [Review duration]. Set a time option.
Page 257 Note When [Hold] is set, images are displayed as long as the time set in the [Display off] option of [ : Power saving].
Page 258 Viewfinder Review Set to [Enable] for viewfinder display of your shots immediately after you shoot. Select [ : Image review]. Select [Viewfinder review]. Select an option. Note [Viewfinder review] settings take effect when [Image review] is set to an option other than [Off].
Page 259 High-Speed Display High-speed display that switches between each shot and the live image is available when shooting with [ : AF operation] set to [Servo AF] and the drive mode set to [ ] [High speed continuous]. Display is more responsive, making it easier to follow fast-moving subjects.
Page 260 Note High-speed display is always used when [ : Shutter mode] is set to [Electronic].
Page 261 Metering Timer You can set how long the metering timer runs (which determines the duration of exposure value display/AE lock) after it is triggered by an action such as pressing the shutter button halfway. Select [ : Metering timer]. Set a time option.
Page 262 Exposure Simulation With exposure simulation, image brightness more closely matches the actual brightness (exposure) of your shots. Select [ : Expo. simulation]. Set an option. Enable ( The displayed image brightness will be close to the actual brightness (exposure) of the resulting image.
Page 263 Shooting Information Display Customizing Information on the Screen Customizing Information in the Viewfinder Viewfinder Vertical Display Grid Histogram Setting Focus Distance Display Clearing Settings You can customize the details and screens of information shown on the screen or in the viewfinder when you shoot.
Page 264 Select [Screen info. settings]. Select screens. Turn the < > dial to select screens of information to show on the camera. For information you prefer not to display, press < > to clear the checkmark [ ]. To edit the screen, press the < >...
Page 265 Edit the screen. Turn the < > dial to select options to show on the screen of information. For items you prefer not to display, press < > to clear the checkmark [ ]. Select [OK] to register the setting.
Page 266 Customizing Information in the Viewfinder Select [ : Shooting info. disp.]. Select [VF info/toggle settings]. Select screens. Turn the < > dial to select screens of information to show on the camera. For information you prefer not to display, press < >...
Page 267 Edit the screen. Turn the < > dial to select options to show on the screen of information. For items you prefer not to display, press < > to clear the checkmark [ ]. Select [OK] to register the setting.
Page 268 Viewfinder Vertical Display You can select how viewfinder information is displayed when you are shooting still photos vertically. Select [ : Shooting info. disp.]. Select [VF vertical display].
Page 269 Select an option. Information is automatically rotated, making it easier to read. Information is not automatically rotated.
Page 270 Grid A grid can be displayed on the screen and viewfinder. Select [ : Shooting info. disp.]. Select [Grid display]. Select an option.
Page 271 Histogram You can select the content and display size of the histogram. Select [ : Shooting info. disp.]. Select [Histogram disp]. Select an option. Select the content ([Brightness] or [RGB]) and display size ([Large] or [Small]).
Page 272 Setting Focus Distance Display You can display focus distance when using RF lenses. In focus distance display, you can select the timing and unit of measurement. Select [ : Shooting info. disp.]. Select [Focus distance disp]. Select the timing of display.
Page 273 Select the unit of measurement. Note For certain RF lenses, magnification is also displayed.
Page 274 Clearing Settings Select [ : Shooting info. disp.]. Select [Reset]. Select [OK].
Page 275 Viewfinder Display Format Select [ : VF display format]. Select an option.
Page 276 Display Performance You can select the performance parameter to prioritize in shooting screen display for still photos. Select [ : Disp. performance]. Select an option.
Page 277 Metering Mode Selection You can select one of four methods to measure the subject brightness. In [ ] mode, evaluative metering is set automatically. Press the < > button ( With an image displayed, press the < > button. Select the metering mode. To select an item, turn the <...
Page 278 Center-weighted average The metering across the screen is averaged, with the center of the screen weighted more heavily. Note By default, the camera will set the exposure as follows. With [ ], holding down the shutter button halfway locks the exposure value (AE lock) after the camera focuses with One-Shot AF.
Page 279 Manual Exposure Compensation Exposure compensation can brighten (increased exposure) or darken (decreased exposure) the standard exposure set by the camera. Exposure compensation is available in [ ], [ ], [ ], [ ], and [ ] modes. For details on exposure compensation when [ ] mode and ISO Auto are both set, see Manual Exposure, and see...
Page 280 Note The exposure compensation amount will remain in effect even after you set the power switch to < >.
Page 281 Exposure Lock (AE Lock) AE Lock Effects You can lock the exposure when you want to set the focus and exposure separately or when you will take multiple shots at the same exposure setting. Press the < > button to lock the exposure, then recompose and take the picture.
Page 282 Recompose and take the picture. When you are to take more pictures while maintaining the AE lock, keep holding down the < > button and press the shutter button to take another picture. Note AE lock is not possible with bulb exposures. AE Lock Effects AF point selection Metering Mode...
Page 283 General Still Photo Shooting Information Display General Still Photo Shooting Precautions Information Display For details on the icons displayed for still photo shooting, see Information Display. Note White display of the [ ] icon indicates that your shots will be about as bright as the image displayed.
Page 284 General Still Photo Shooting Precautions Caution Do not point the camera toward an intense light source, such as the sun or an intense artificial light source. Doing so may damage the image sensor or the camera’s internal components. Image quality When you shoot at high ISO speeds, noise (such as dots of light and banding) may become noticeable.
Page 285 Images and display Under low- or bright-light conditions, the displayed image may not reflect the brightness of the captured image. Although noise may be noticeable in images under low light (even at low ISO speeds), there will be less noise in your shots, due to differences in image quality between displayed and captured images.
Page 286 Tab Menus: Movie Recording • Movie Recording • Movie Recording Quality • Movie Cropping • Sound Recording • Canon Log Settings • HDR Movie Recording • Time-Lapse Movies • Movie Self-Timer • Image Stabilizer (IS Mode) • Shutter Button Function for Movies •...
Page 287 • Other Menu Functions • General Movie Recording Precautions...
Page 288 Tab Menus: Movie Recording Shooting 1 Movie rec quality Movie cropping Sound recording Shooting 2 Exposure comp. ISO speed settings HDR PQ settings Auto Lighting Optimizer Highlight tone priority Av 1/8-stop incr. Auto slow shutter...
Page 289 Shooting 3 White balance Custom White Balance WB correction (4) Picture Style • Picture Style Selection • Picture Style Customization • Picture Style Registration Canon Log settings Clarity Shooting 4 Lens aberration correction High ISO speed NR...
Page 290 Shooting 5 HDR Movie Recording Time-lapse movie Shooting 6 Movie self-timer Remote control...
Page 291 Shooting 7 IS (Image Stabilizer) mode Shutter btn function for movies Metering timer Zebra settings Shooting info. disp. VF display format Shooting 8 Overheat control HDMI display Time code...
Page 292 Movie Recording Autoexposure Recording Shutter-Priority AE Aperture-Priority AE Scene Icons ISO Speed in [ ] Mode Manual Exposure Recording ISO Speed in [ ] Mode Shutter Speed Still Photo Shooting Information Display (Movie Recording) Autoexposure Recording Exposure is controlled automatically to suit the brightness. Set the recording mode to [ ] or [ Press the <...
Page 293 Focus on the subject. Before recording a movie, focus with AF ( ) or manual focus ( By default, [ : Movie Servo AF] is set to [Enable] so that the camera always keeps focusing ( When you press the shutter button halfway, the camera will focus with the current AF method.
Page 294 Record the movie. Press the movie shooting button to start recording a movie. You can also start recording a movie by tapping [ ] on the screen. While the movie is being recorded, the [ REC] icon (1) will be displayed in the upper right of the screen.
Page 295 Shutter-Priority AE ] recording mode enables you to set your preferred shutter speed for movies. ISO speed and aperture values are set automatically to suit the brightness and obtain standard exposure. Set the recording mode to [ Press the < >...
Page 296 Focus and record the movie. Same as steps 2 and 3 for Autoexposure Recording. Caution Avoid adjusting shutter speed while recording movies, which will record changes in exposure. When recording a movie of a moving subject, a shutter speed of approx. 1/25 sec. to 1/125 sec.
Page 297 Aperture-Priority AE ] recording mode enables you to set your preferred aperture value for movies. ISO speed and shutter speed are set automatically to suit the brightness and obtain standard exposure. Set the recording mode to [ Press the < >...
Page 298 Focus and record the movie. Same as steps 2 and 3 for Autoexposure Recording. Caution Avoid adjusting the aperture value while recording movies, which will record changes in exposure caused by aperture adjustment. Note Notes for [ ], [ ], [ ], and [ ] modes You can lock the exposure (AE lock) by pressing the <...
Page 299 Scene Icons In [ ] recording mode, the camera detects the type of scene and sets all settings accordingly. The detected scene type is indicated in the upper left of the screen. For icon details, see Scene Icons.
Page 300 ISO Speed in [ ] Mode ISO speed is set automatically. See ISO Speed in Movie Recording.
Page 301 Manual Exposure Recording You can manually set the shutter speed, aperture value, and ISO speed for movie recording. Set the recording mode to [ Press the < > button, then turn the < > dial to select [...
Page 302 Set the shutter speed, aperture value, and ISO speed. Press the shutter button halfway and check the exposure level indicator. Turn the < > dial to set the shutter speed (1), the < > dial to set the aperture value (2), and the < >...
Page 303 Focus and record the movie. Same as steps 2 and 3 for Autoexposure Recording. Caution ISO speed cannot be expanded to L (equivalent to ISO 50) in movie recording. During movie recording, avoid changing the shutter speed, aperture value, or ISO speed, which may record changes in the exposure or create more noise at high ISO speeds.
Page 304 ISO Speed in [ ] Mode You can set the ISO speed manually or select [ ] to set it automatically. For details on ISO speed, see ISO Speed in Movie Recording.
Page 305 Shutter Speed Available shutter speeds in [ ] and [ ] mode vary depending on the frame rate of your specified movie recording quality. Shutter Speed (Sec.) Frame Rate High Frame Rate Movie Normal Movie Recording HDR Movie Recording Recording 1/4000–1/125 –...
Page 306 Still Photo Shooting Still photo shooting is not supported in movie recording mode. To shoot still photos, stop recording and change the [Shooting mode] setting to still photos first.
Page 307 Information Display (Movie Recording) For details on the icons on the movie recording screen, see Information Display. Caution The remaining time displayed for movie recording is only a guideline. Movie recording may stop before the initially displayed recording time elapses if the red [ ] icon appears due to high internal camera temperature during recording...
Page 308 Movie Recording Quality Movie Recording Size 8K/4K Movie Recording Image Area Cards That Can Record Movies High Frame Rate 4K HQ Mode Movie Files Exceeding 4 GB Total Movie Recording Time and File Size Per Minute Movie Recording Time Limit You can set the image size, frame rate, and compression method in the [Movie rec.
Page 309 Movie Recording Size Image size Aspect Ratio 8192×4320 17:9 7680×4320 16:9 4096×2160 17:9 3840×2160 16:9 1920×1080 16:9 Caution If you change the [ : Video system] setting, also set [ : Movie rec quality] again. Other devices may not play movies such as 8K, 4K, , or High Frame Rate movies normally, because playback is processing-intensive.
Page 310 8K/4K Movie Recording Recording 8K or 4K movies requires a stable card with a fast writing speed. For details, Cards That Can Record Movies. 8K/4K or High Frame Rate movie recording greatly increases the processing load, which may increase the internal camera temperature faster or higher than for regular movies. If ] or a red [ ] icon appears during movie recording, the card may be hot, so stop recording the movie and let the camera cool down before removing the card.
Page 311 Image Area The movie image area varies depending on factors such as movie recording quality and cropped shooting settings and the lens used. RF or EF lenses: With [ : Movie cropping] set to [Disable] (time-lapse) / (time-lapse) / (time-lapse) (8192×4320) / (4096×2160) (7680×4320) /...
Page 312 Frame rate (fps: frames per second) ] 119.9 fps/[ ] 59.94 fps/[ ] 29.97 fps For areas where the TV system is NTSC (North America, Japan, South Korea, Mexico, etc.). For [ ], see High Frame Rate. ] 100.00 fps/[ ] 50.00 fps/[ ] 25.00 fps For areas where the TV system is PAL (Europe, Russia, China, Australia, etc.).
Page 313 Commercially available software may not be able to display RAW movies recorded by this camera. For compatibility information, contact the software manufacturer. To prioritize gradation in highlights, set Canon Log to [On]. This is recommended for Cinema EOS and RAW movies.
Page 314 Cards That Can Record Movies For details on CFexpress cards that can record at each level of movie recording quality, check the Canon website. Card performance requirements for details on SD cards. Test cards by recording a few movies to make sure they can record correctly at your...
Page 315 High Frame Rate You can record 4K movies at a high frame rate of 119.9 fps or 100.0 fps. This is ideal for recording movies that will be played back in slow motion. The maximum recording time per movie is 7 min. 29 sec. Movies are recorded in quality.
Page 316 4K HQ Mode You can record movies at a higher level of quality than normal 4K movies. Movie recording sizes for 4K HQ mode are displayed.
Page 317 Movie Files Exceeding 4 GB Using SD/SDHC cards formatted with the camera If you use the camera to format an SD/SDHC card, the camera will format it in FAT32. With a FAT32-formatted card, if you record a movie and the file size exceeds 4 GB, a new movie file will be created automatically.
Page 318 Total Movie Recording Time and File Size Per Minute For details, see Movie recording.
Page 319 Movie Recording Time Limit When recording non-High Frame Rate movies The maximum recording time per movie is 29 min. 59 sec. Once 29 min. 59 sec. is reached, recording automatically stops. You can start recording a movie again by pressing the movie shooting button (which records the movie as a new file). When recording High Frame Rate movies The maximum recording time per movie is 7 min.
Page 320 Movie Cropping With RF or EF lenses, movies can be cropped around the center of the image, as if using a telephoto lens. Recording movies with EF-S lenses has the same effect as this movie cropping feature. Select [ : Movie cropping]. Select [Enable].
Page 321 Sound Recording Sound Recording/Sound-Recording Level Wind Filter Attenuator You can record movies while recording sound with the built-in monaural microphone or an external stereo microphone. You can also freely adjust the sound-recording level. Use [ : Sound recording] to set sound recording functions. Caution Sounds from Wi-Fi operations may be captured with built-in or external microphones.
Page 322 Note In [ ] mode, the settings available for [ : Sound recording] are [On] or [Off]. Set to [On] for automatic adjustment of the recording level. Audio is also output when the camera is connected to televisions via HDMI, except when [Sound rec.] is set to [Disable].
Page 323 Wind Filter Set to [Enable] to reduce wind noise when there is wind outdoors. Only activated when the camera’s built-in microphone is used. When the wind filter function takes effect, part of the low bass sounds will also be reduced.
Page 324 Attenuator Automatically suppresses sound distortion caused by loud noises. Even if [Sound rec.] is set to [Auto] or [Manual] for recording, sound distortion may still result if there is a very loud sound. In this case, setting it to [Enable] is recommended. Microphone Normally, the built-in microphone records in mono.
Page 325 To work with Canon Log movies in postproduction, you can apply look-up tables (LUTs). LUT data can be downloaded from the Canon website. Select [ : Canon Log settings].
Page 326 Select [On] ( Set the options as desired. [View Assist.], [Color Matrix], [Characteristics], and [Color space].
Page 327 Canon Log Enables 10-bit recording of Canon Log movies to the card. Movies can also be recorded to an external device that supports 10-bit recording. Note YCbCr 4:2:2 (10-bit) color sampling and the BT.709/BT.2020 color space are used in Canon Log recording.
Page 328 When played on the camera, these movies may look darker and have lower contrast than movies recorded with a Picture Style applied, due to Canon Log image characteristics, which are intended to ensure a wide dynamic range. For clearer display that makes it easier to check details, set [View Assist.] to [On].
Page 329 +4: Toward magenta * Reds, greens, and blues cannot be adjusted separately. Color space [Color space] can be set when [Canon Log] is set to [On] and [Color Matrix] to [Neutral]. Choose [BT.709] or [BT.2020] as the color space for HDMI output.
Page 330 Manually setting the ISO speed to 100–320 will make the dynamic range narrower. Canon Log offers a dynamic range of approx. 800% at ISO 400 or higher. ISO 100, 125, 160, 200, 250, and 320 are expanded ISO speeds. [ ] is displayed when...
Page 331 In particular, noise may become more noticeable if you enhance the contrast when color-grading your movies. With Canon Log, skies, white walls, and similar subjects may be affected by noise or uneven gradation, exposure, or colors. Horizontal banding is more likely to occur when recording somewhat dark, flat subjects.
Page 332 HDR Movie Recording You can record high dynamic range movies that retain detail in highlights of high-contrast scenes. Select [ HDR Movie Recording]. Select [Enable]. Record an HDR movie. Record the movie in the same way as normal movie recording. For details on file sizes and the recording time available, see Movie recording.
Page 333 : Time-lapse movie], [ : Highlight tone priority], [ : Canon Log settings], or [ : HDR PQ settings]. Since multiple frames are merged to create an HDR movie, certain parts of the movie may look distorted. This is more noticeable in handheld recording affected by camera shake, so consider using a tripod.
Page 334 Time-Lapse Movies Approx. Time Available for Recording Time-Lapse Movies Still photos captured at your specified interval can be automatically combined to create an 8K, 4K, or Full HD time-lapse movie. A time-lapse movie shows how a subject changes in a much shorter period of time than the actual time it took.
Page 335 Set [Interval]. Select [Interval]. As you set the number, refer to the [ ] time required (1) and [ playback time (2). Select an option (hours : minutes : seconds). Press < > to display [ ]. Set the desired number, then press < >.
Page 336 Set [No. of shots]. Select [No. of shots]. As you set the number, refer to the time required ([ ]) and playback time ([ Select the digit. Press < > to display [ ]. Set the desired number, then press < >.
Page 337 Select [Movie rec. size]. (7680×4320) The movie is recorded in 8K quality. The aspect ratio is 16:9. Additionally, the frame rate is 29.97 fps ( ) for NTSC and 25.00 fps ) for PAL, and movies are recorded in MP4 ( ) format with ALL-I ( ) compression.
Page 338 Set [Auto exposure]. Fixed 1st frame When taking the first shot, metering is performed to set the exposure automatically to match the brightness. The exposure setting for the first shot will be applied to subsequent shots. Other shooting-related settings for the first shot will also be applied for subsequent shots. Each frame Metering is also performed for each subsequent shot to set the exposure automatically to match the brightness.
Page 339 Set [Screen auto off]. Disable Even during time-lapse movie recording, the image will be displayed. (The screen turns off only at the time of shooting.) Note that the screen will turn off when approx. 30 min. elapse after the shooting started. Enable Note that the screen will turn off when approx.
Page 340 Set [Beep as img taken]. Set to [Disable] to prevent the camera from beeping for each shot. Check the settings. Time required (1) Indicates the time required to shoot the set number of shots with the set interval. If it exceeds 24 hours, “*** days” will be displayed. Playback time (2) Indicates the movie recording time (equivalent to the time required for playback) once the movie is created from still photos taken at regular...
Page 341 Read the message. Read the message and select [OK]. Take a test shot. As in still photo shooting, set the exposure and shooting functions, then press the shutter button halfway to focus. Press the shutter button completely to take a test shot, which is recorded to the card as a still photo.
Page 342 Press the movie shooting button. The camera is now ready to start recording a time-lapse movie. To return to step 12, press the movie shooting button again.
Page 343 Record the time-lapse movie. Press the < > button and double-check the Time required (1) and Interval (2) shown on the screen. Press the shutter button completely to start recording the time- lapse movie. AF will not work during time-lapse movie recording. A recording icon “●”...
Page 344 Note Using a tripod is recommended. Taking test shots as in step 12 and recording test movies for time-lapse movies beforehand is recommended. Field of view (coverage) for recording 8K, 4K, and Full HD time-lapse movies is approx. 100%. To cancel time-lapse movie recording in progress, either press the shutter button completely or press the movie shooting button.
Page 345 Caution Do not point the camera toward an intense light source, such as the sun or an intense artificial light source. Doing so may damage the image sensor or the camera’s internal components. Time-lapse movies cannot be recorded when the camera is connected to a computer with the interface cable, or when an HDMI cable is connected.
Page 346 Set [ : Time-lapse movie] to [Disable] if you will connect the camera to a computer with the interface cable and use EOS Utility (EOS software). Options other than [Disable] will prevent the camera from communicating with the computer. Image stabilization is not applied in time-lapse movie recording. Time-lapse movie shooting ends if the power switch is set to <...
Page 347 Approx. Time Available for Recording Time-Lapse Movies For guidelines on how long you can record time-lapse movies (until the battery runs out), Movie recording.
Page 348 Movie Self-Timer Movie recording can be started by the self-timer. Select [ : Movie self-timer]. Select an option. Record the movie. After you press the movie button or tap [ ], the camera displays the number of seconds left before recording and beeps. Note To cancel the self-timer, either tap the screen or press <...
Page 349 Image Stabilizer (IS Mode) IS Mode Movie Digital IS The camera’s IS mode and movie digital IS features reduce camera shake as movies are recorded. They can provide effective stabilization even when your lens is not equipped with Image Stabilizer. When using a lens equipped with Image Stabilizer, set the lens’s Image Stabilizer switch to <...
Page 350 Caution [IS mode] is not displayed when an IS-equipped lens is attached.
Page 351 Movie Digital IS Select [ : IS (Image Stabilizer) mode]. Select a [ Digital IS] option. Off ( Image stabilization with Movie digital IS is disabled. On ( Camera shake will be corrected. The image will be slightly magnified. Enhanced ( Compared to when [On] is set, stronger camera shake can be corrected.
Page 352 With some lenses, even more effective stabilization (indicated by “+” next to the IS icon) is possible when the lens’s IS is used in conjunction with [IS mode] and [Movie digital IS] on the camera. For details on lenses compatible with this feature, visit the Canon website.
Page 353 Shutter Button Function for Movies You can set the functions performed by pressing the shutter button halfway or completely during movie recording. Caution In movie recording, the [Shutter btn function for movies] setting overrides any function assigned to the shutter button in [ : Customize buttons].
Page 354 Select an option. Half-press Specify the function performed by pressing the shutter button halfway. Fully-press Specify the function performed by pressing the shutter button completely. With [Fully-press] set to [Start/stop mov rec], you can start/stop movie recording not only with the movie shooting button but also by pressing the shutter button completely, or by using Remote Switch TC-80N3 (sold separately).
Page 355 Zebra Settings To help you adjust exposure before or during movie recording, you can display a striped pattern over or around image areas of a specified brightness. Select [ : Zebra settings]. Select [Zebra]. Select [On].
Page 356 Select [Zebra pattern]. [Zebra 1]: Displays left-slanting stripes around areas of the specified brightness. [Zebra 2]: Displays right-slanting stripes over areas that exceed the specified brightness. [Zebra 1+2]: Displays both [Zebra 1] and [Zebra 2]. An overlapping zebra pattern is displayed where the [Zebra 1] and [Zebra 2] display areas overlap.
Page 357 : Highlight tone priority] and [ : Picture Style] settings. The maximum brightness value does not reach 100% when Canon Log or an expanded ISO speed is set. Checking the zebra display level in advance is recommended when you will set...
Page 358 Time Code Count Up Start Time Setting Movie Recording Count Movie Play Count HDMI Drop Frame Time codes record the time automatically as movies are recorded. Time codes always record elapsed hours, minutes, seconds, and frames. They are mainly used when movies are edited.
Page 359 Count Up Rec run The time code advances only during movie recording. Time codes in each movie file recorded continue from the last time code in the previous file. Free run The time code keeps advancing, even when you are not recording. Caution When set to [Free run], time codes are not added to High Frame Rate movies that you record.
Page 360 Start Time Setting You can set the initial time of the time code. Manual input setting Enables you to set any starting hour, minute, second, and frame. Reset Resets the time set with [Manual input setting] or [Set to camera time] to “00:00:00.” or “00:00:00:”...
Page 361 Movie Recording Count You can select how time is displayed on the movie recording screen. Rec time During recording standby, displays the available recording time. During recording, displays the time that has elapsed since movie recording began (1). Time code Displays the time code during movie recording (2).
Page 362 Movie Play Count You can select how time is displayed on the movie playback screen. Rec time Displays the recording or playback time during movie playback. Time code Displays the time code during movie playback. Note Time codes are always recorded to movie files (except for High Frame Rate movies set to [Free run]), regardless of the [Movie rec count] setting.
Page 363 HDMI Time code Time codes can be added to movies as you record them to an external device via HDMI. • Off No time code is added to HDMI video output. • On Time codes are added to HDMI video output. When [On] is set, [Rec Command] is displayed.
Page 364 Drop Frame The time code’s frame count will cause a discrepancy between the actual time and the time code if the frame rate is set to (119.9 fps), (59.94 fps), or (29.97 fps). The discrepancy is corrected automatically when [Enable] is set. Enable Corrects the discrepancy automatically by skipping time code numbers (DF: drop frame).
Page 365 Other Menu Functions Exposure comp. Exposure compensation can be adjusted in a range of ±3 stops, in 1/3-stop increments. For details on exposure compensation, see Manual Exposure Compensation. ISO speed settings • ISO speed In [ ] mode, you can set the ISO speed manually. You can also select ISO Auto. •...
Page 366 HDR PQ settings For details on HDR PQ settings, see HDR PQ Settings. Auto Lighting Optimizer Brightness and contrast can be corrected automatically. For details on Auto Lighting Optimizer, see Auto Lighting Optimizer. Highlight tone priority You can reduce overexposed, clipped highlights as you record movies. For details on Highlight tone priority, see Highlight Tone Priority.
Page 367 Auto slow shutter You can choose whether to record movies that are brighter and less affected by image noise than when set to [Disable] by automatically slowing the shutter speed under low light. Available in [ ] or [ ] recording mode. Applies when the frame rate of the movie recording size is •...
Page 368 White balance For details on white balance, see White Balance. Custom White Balance For details on custom white balance, see Custom White Balance. WB correction For details on white balance correction, see White Balance Correction. Picture Style For details on Picture Styles, see Picture Style Selection.
Page 369 Lens aberration correction Peripheral illumination, distortion, chromatic aberration, and diffraction can be corrected as you record movies. For details on lens aberration correction, see Lens Aberration Correction. High ISO speed NR For details on High ISO speed noise reduction, see High ISO Speed Noise Reduction.
Page 370 Remote control By setting to [Enable], you can start or stop movie recording with Remote Controller RC-6 or Wireless Remote Control BR-E1 (both sold separately).
Page 371 Metering timer For details on the metering timer, see Metering Timer. Shooting info. disp. For details on shooting information display, see Shooting Information Display. VF display format For details on the viewfinder display format, see Viewfinder Display Format.
Page 372 Overheat control Set to [On] to conserve battery power and help prevent the camera from overheating while waiting to shoot. As a result, it may enable you to record movies over a longer period. Caution Image quality on the standby screen may differ from image quality on the screen during movie recording.
Page 373 HDMI display You can specify how movies are displayed as they are recorded via HDMI to an external device. Movie output itself corresponds to the [Movie rec. size] setting. The default setting is [ • Enables movie display both on the camera screen and on the other device, via HDMI output.
Page 374 Note By pressing the < > button, you can change the information displayed. Time codes can be added to HDMI video output ( Audio is also output via HDMI, except when [Sound rec.] is set to [Disable].
Page 375 General Movie Recording Precautions Caution Precautions for movie recording Do not point the camera toward an intense light source, such as the sun or an intense artificial light source. Doing so may damage the image sensor or the camera’s internal components. If you record something that has fine detail, moire or false colors may result.
Page 376 Movies are recorded almost exactly as they appear on the screen, except in time-lapse movie recording or with Canon Log View Assist. Video and audio quality of recorded movies may be worse on other devices, and playback may not be possible, even if the devices support MP4 formats.
Page 377 Audio restrictions Note that the following restrictions apply in [ ] mode when [ : Movie rec quality] is set to (NTSC) or (PAL), or when [ Audio compression] is set to [Enable]. • Sound will not be recorded for approx. the last two frames. •...
Page 378 AF/Drive This chapter describes autofocus operation and drive modes and introduces menu settings on the AF [ ] tab. to the right of titles indicates functions only available in [ ], [ ], [ ], [ ], [ ], or ] mode.
Page 379 Tab Menus: AF (Still Photos) AF operation AF method Subject to detect Eye detection Continuous AF Touch & drag AF settings Note When lenses without a focus mode switch are used, [Focus mode] is displayed on the [ 1] tab. MF peaking settings Focus guide AF-assist beam firing...
Page 380 Case 1 Case 2 Case 3 Case 4 Case A Tracking sensitivity Accel./decel. tracking Lens electronic MF One-Shot AF release prior. Switching tracked subjects Lens drive when AF impossible Limit AF methods AF method selection control Orientation linked AF point...
Page 381 Initial Servo AF pt for Focus ring rotation RF lens MF focus ring sensitivity sensitivity- AF pt select In [ ] mode, the following screens are displayed. Subject to detect Eye detection Continuous AF Movie Servo AF Touch & drag AF settings Focus guide AF-assist beam firing...
Page 382 Focus ring rotation RF lens MF focus ring sensitivity sensitivity- AF pt select...
Page 383 Tab Menus: AF (Movie Recording) AF method Subject to detect Eye detection Movie Servo AF Touch & drag AF settings Note When lenses without a focus mode switch are used, [Focus mode] is displayed on the [ 1] tab. MF peaking settings Focus guide...
Page 384 Movie Servo AF speed Movie Servo AF track sens. Lens electronic MF Switching tracked subjects Lens drive when AF impossible Limit AF methods AF method selection control Focus ring rotation RF lens MF focus ring sensitivity sensitivity- AF pt select...
Page 385 In [ ] mode, the following screens are displayed. Subject to detect Eye detection Movie Servo AF Touch & drag AF settings Focus guide Focus ring rotation RF lens MF focus ring sensitivity sensitivity- AF pt select...
Page 386 AF Operation One-Shot AF for Still Subjects Servo AF for Moving Subjects You can select the AF operation characteristics to suit the shooting conditions or subject. Set the lens’s focus mode switch to < >. Select [ : AF operation]. Select an option.
Page 387 Note If focus is not achieved, the AF point will turn orange. With One-Shot AF, shooting is not possible even by pressing the shutter button completely. Recompose the shot and try to focus again. Or, see Shooting Conditions That Make Focusing Difficult.
Page 388 One-Shot AF for Still Subjects This AF operation is suited for still subjects. When you press the shutter button halfway, the camera will focus only once. When focus is achieved, the AF point will turn green and the beeper will sound. The focus remains locked while you hold down the shutter button halfway, allowing you to recompose the image before taking the picture.
Page 389 Servo AF for Moving Subjects This AF operation is suited for moving subjects. While you hold down the shutter button halfway, the camera will keep focusing on the subject continuously. When focus is achieved, the AF point will turn blue. The beeper will not sound even when focus is achieved.
Page 390 Selecting the AF Method AF Method Selecting the AF Method (Face)+Tracking: Subject to Detect Eye Detection Spot AF / 1-Point AF / Expand AF Area: / Expand AF Area: Around / Zone AF / Large Zone AF: Vertical / Large Zone AF: Horizontal Magnified View AF Shooting Tips Shooting Conditions That Make Focusing Difficult...
Page 391 With Servo AF, you can set the initial position for Servo AF ( ). As long as the Area AF frame can track the subject during shooting, focusing will continue. : Spot AF The camera focuses in a narrower area than 1-point AF. : 1-point AF The camera focuses using a single AF point [...
Page 392 : Expand AF area: Focuses using one AF point [ ] and AF points outlined here in blue. Effective for moving subjects, which are difficult to track with 1-point AF. Focusing on your preferred subject is easier than with Zone AF. When Servo AF is used, first you will focus using an AF point [ : Expand AF area: Around Focuses using one AF point [...
Page 393 : Zone AF Uses auto selection AF in Zone AF frames to cover a larger area than Expand AF area, which makes focusing easier than with Expand AF area. Focusing areas are determined not only based on the nearest subject but also based on a variety of other conditions such as faces (of people or animals), subject motion, and subject distance.
Page 394 : Large Zone AF: Horizontal Uses auto selection AF in a horizontal Large Zone AF frame to cover a larger area than Zone AF, which makes focusing easier than with 1-point AF/Expand AF area and also effective for moving subjects. Focusing areas are determined not only based on the nearest subject but also based on a variety of other conditions such as faces (of people or animals), subject motion, and subject distance.
Page 395 Selecting the AF Method You can select the AF method to suit the shooting conditions or subject. If you prefer to focus manually, see Manual Focus. Select [ : AF method]. Select the AF method. Note In [ ] mode, [ +Tracking] is set automatically.
Page 396 (Face)+Tracking: The camera detects and focuses on faces of people or animals. If a face moves, the AF point [ ] also moves to track the face. You can set [ : Eye detection] to [Enable] to shoot with the subject’s eyes in focus ( Check the AF point.
Page 397 Focus and take the picture. Once you press the shutter button halfway and the subject is in focus, the AF point turns green and the camera beeps. An orange AF point indicates that the camera could not focus on subjects. Note Selecting the face of a person or animal manually by tapping the screen or using <...
Page 398 Caution Tapping the screen to focus will focus with [One-Shot AF], regardless of the AF operation setting. If the subject’s face is significantly out of focus, face detection will not be possible. Adjust the focus manually ( ) so that the face can be detected, then perform AF. Objects other than a human face or animal face or body may be detected.
Page 399 Set the AF point. An Area AF frame (1) and AF point (2) are displayed. To move the AF point into position for focusing, press the < > button and then use < >, or tap the screen, then press < >.
Page 400 Subject to Detect You can specify conditions for automatic selection of the main subject to track. Takes effect when the AF method is Face+Tracking, Zone AF, or Large Zone AF (vertical or horizontal). People Prioritizes the faces or heads of people as the main subjects to track. When a person’s face or head cannot be detected, the camera may track all or part of their body.
Page 401 Eye Detection With the AF method set to [ +Tracking], you can shoot with the eyes of people or animals in focus. Select [ : Eye detection]. Select [Enable].
Page 402 Aim the camera at the subject. An AF point is displayed around their eye. To choose an eye to focus on, press the < > button to change the AF point to [ ], then use < >. As you use < >, the AF point changes again to [ You can also tap the screen to choose an eye.
Page 403 Spot AF / 1-Point AF / Expand AF Area: / Expand AF Area: Around / Zone AF / Large Zone AF: Vertical / Large Zone AF: Horizontal You can manually set the AF point or Zone AF frame. Here, 1-point AF screens are used as an example.
Page 404 Move the AF point. Press the < > button, use < > to move the AF point into position for focusing, then press < > (but note that with some lenses, it may not move to the edge of the screen). To center the AF point while using <...
Page 405 Caution The camera continues to switch the active AF point [ ] to track subjects when Zone AF or Large Zone AF (vertical or horizontal) is set to Servo AF, but tracking may not be possible under some shooting conditions, such as when subjects are small.
Page 406 Magnified View To check the focus when the AF method is other than [ +Tracking], magnify display by approx. 6× or 15× by pressing the < > button (or tapping [ Magnification is centered on the AF point for [Spot AF], [1-point AF], [Expand AF area: ], and [Expand AF area: Around] and on the Zone AF frame for [Zone AF], [Large Zone AF: Vertical], and [Large Zone AF: Horizontal].
Page 407 AF Shooting Tips Even when focus is achieved, pressing the shutter button halfway will focus again. Image brightness may change before and after autofocusing. Depending on the subject and shooting conditions, it may take longer to focus, or the continuous shooting speed may decrease. If the light source changes as you shoot, the screen may flicker, and focusing may be difficult.
Page 408 Shooting Conditions That Make Focusing Difficult Subject with low-contrast such as the blue sky, solid-color flat surfaces or when highlight or shadow details are clipped. Subjects in low light. Stripes and other patterns where there is contrast only in the horizontal direction. Subjects with repetitive patterns (Example: Skyscraper windows, computer keyboards, etc.).
Page 409 AF Range The available autofocus range varies depending on the lens, aspect ratio, and image quality used, and whether you are recording 4K or 8K movies and using features such as movie cropping or Movie digital IS.
Page 410 Continuous AF This function keeps subjects generally in focus. The camera is ready to focus immediately when you press the shutter button halfway. Select [ : Continuous AF]. Select [Enable]. Caution Fewer shots are available when set to [Enable], because the lens is driven continuously and battery power is consumed.
Page 411 Movie Servo AF With this function enabled, the camera focuses on the subject continuously during movie recording. Select [ : Movie Servo AF].
Page 412 Select [Enable]. Enable • The camera focuses on the subject continuously even when you are not pressing the shutter button halfway. • To keep the focus at a specific position, or if you prefer not to record mechanical sounds from the lens, you can temporarily stop Movie Servo AF by tapping [ ] in the lower left of the screen.
Page 413 Caution Precautions when set to [Movie Servo AF: Enable] Shooting conditions that make focusing difficult • A fast-moving subject approaching or moving away from the camera. • A subject moving at a close distance to the camera. • When shooting with a higher aperture value. •...
Page 414 Touch & Drag AF Settings Touch & Drag AF Positioning Method Active Touch Area You can move the AF point or Zone AF frame by tapping or dragging on the screen as you look through the viewfinder. Touch & Drag AF Select [ : Touch &...
Page 415 Positioning Method You can set how positions are specified by tapping or dragging. Set [Positioning method]. Absolute The AF point moves to the tapped or dragged position on the screen. Relative The AF point moves in the direction you drag, by an amount corresponding to the amount you drag, no matter where you tap the screen.
Page 416 Active Touch Area You can specify the area of the screen used for tap and drag operations. Set [Active touch area]. Note Tapping the screen when [ +Tracking] is set displays a round orange frame [ After you lift your finger at the position to move the AF point to, [ ] is displayed and that subject is tracked.
Page 417 Manual Focus Setting MF Peaking (Outline Emphasis) Focus Guide AF-Assist Beam Firing If focusing is not possible with autofocus, you can magnify the image and focus manually. Set the lens’s focus mode switch to < >. Turn the lens focusing ring to set the approximate focus. Magnify the image.
Page 418 Move the magnified area. Use < > to move the magnified area into position for focusing. To center the magnified area, press < > straight in or press < >. Focus manually. While looking at the magnified image, turn the lens focusing ring to focus.
Page 419 Setting MF Peaking (Outline Emphasis) Edges of subjects in focus can be displayed in color to make focusing easier. You can set the outline color and adjust the sensitivity (level) of edge detection. Select [ : MF peaking settings]. Select [Peaking]. Select [On].
Page 420 If necessary, lower the ISO speed or set [Peaking] to [Off]. Note Peaking display shown on the screen is not recorded in images. MF peaking may be hard to discern when Canon Log is set. If necessary, set [View Assist.] to [On].
Page 421 Focus Guide Setting [Focus guide] to [On] provides a guide frame that shows which direction to adjust focus and the extent of adjustment needed. The guide frame is displayed near any eyes that are detected for the main subject when [ : AF method] is set to [ +Tracking] and [ Eye detection] is set to [Enable].
Page 422 The guide frame indicates the current position in focus and adjustment amount as follows. Significantly out of focus toward infinity Slightly out of focus toward infinity In focus Slightly out of focus toward close range Significantly out of focus toward close range...
Page 423 Adjustment information not detected Caution Under difficult shooting conditions for AF ( ), the guide frame may not be displayed correctly. Higher aperture values are more likely to prevent correct guide frame display. No AF points are displayed while the guide frame is displayed. The guide frame is not displayed in these situations.
Page 424 AF-Assist Beam Firing You can enable or disable AF-assist beam firing of the camera or a Speedlite for EOS cameras. Select [AF-assist beam firing]. Select an option. [ON] Enable Enables firing of the AF-assist beam, when needed. [OFF] Disable Disables firing of the AF-assist beam. Set if you prefer not to fire the AF-assist beam.
Page 425 Caution If a Speedlite’s [AF-assist beam firing] Custom Function is set to [Disable], the AF-assist beam will not be emitted.
Page 426 Servo AF Characteristics Case Details Case 1: Versatile Multi-Purpose Setting Case 2: Continue to Track Subjects, Ignoring Possible Obstacles Case 3: Instantly Focus on Subjects Suddenly Entering AF Points Case 4: For Subjects That Accelerate or Decelerate Quickly Case A: Tracking Automatically Adapts to Subject Movement Parameters Adjusting Case Parameters Shooting with AI Servo AF/Servo AF can be easily tailored to your subjects or shooting...
Page 427 Case Details Cases 1 to A are five combinations of settings for “Tracking sensitivity” and “Accel./decel. tracking.” Referring to the following table, select the case for your subject and shooting situation. Examples of Shooting Case Icon Description Situations Case 1 Versatile multi purpose setting Moving subjects in general Continue to track subjects,...
Page 428 Case 1: Versatile Multi-Purpose Setting Default • Tracking sensitivity: 0 • Accel./decel. tracking: 0 Standard setting suited to moving subjects in general. Suitable for many kinds of subjects and scenes. In the following situations, select [Case 2] to [Case 4] instead: non-subjects moving across AF points, elusive subjects, or subjects that suddenly appear or change speed.
Page 429 Case 2: Continue to Track Subjects, Ignoring Possible Obstacles Default • Tracking sensitivity: Locked on: –1 • Accel./decel. tracking: 0 Setting to continue focusing on the subject even if non-subjects move across AF points, or if the subject strays from AF points. Effective if you prefer the focus not to switch to non- subjects or the background.
Page 430 Case 3: Instantly Focus on Subjects Suddenly Entering AF Points Default • Tracking sensitivity: Responsive: +1 • Accel./decel. tracking: +1 Setting to focus on a series of subjects at different distances in the AF points, one after another. Focus switches to any new subject that appears in front of the target subject. Also effective when you want to always focus on the closest subject.
Page 431 Case 4: For Subjects That Accelerate or Decelerate Quickly Default • Tracking sensitivity: Responsive: 0 • Accel./decel. tracking: +1 Setting to keep tracking and focusing on subjects even if they suddenly change speed. Effective for subjects having sudden movements, sudden acceleration/deceleration, or sudden stops.
Page 432 Case A: Tracking Automatically Adapts to Subject Movement Useful when you prefer to shoot with parameters set automatically, based on how subjects change. Tracking sensitivity and acceleration/deceleration tracking are set automatically.
Page 433 Parameters Tracking sensitivity Setting for Servo AF subject-tracking sensitivity in response to non-subjects moving across AF points or subjects straying from AF points. Standard setting. Suitable for moving subjects in general. Locked on: –2 / Locked on: –1 The camera will try to continue focusing on the subject even if non-subjects move across AF points or if the subject strays from the AF points.
Page 434 Accel./decel. tracking Setting for AI Servo AF/Servo AF subject-tracking sensitivity in response to sudden, significant changes in speed, as when subjects suddenly start or stop moving. Suited for subjects that move at a steady speed (minor changes in moving speed). –2 / –1 Suited for subjects that move at a steady speed (minor changes in moving speed).
Page 435 Adjusting Case Parameters You can manually adjust the parameters ((1) Tracking sensitivity and (2) Acceleration/ deceleration tracking) for cases 1 to 4. Select a case. Turn the < > dial to select the number of a case to adjust. Press the < >...
Page 436 Make the adjustment. Default settings are indicated by a light gray [ ] icon. To confirm the adjustment, press < >. To return to the screen in step 1, press the < > button. Note To restore default parameter settings for (1) and (2) to each case, press the <...
Page 437 Customizing AF Functions [AF4] [AF5] [AF3] (In Movie Recording) You can configure AF functions in detail to suit your shooting style or subject. Lens electronic MF For EF lenses equipped with electronic manual focusing, you can specify how manual focus adjustment is used with One-Shot AF.
Page 438 ] One-Shot→enabled (magnify) You can manually adjust the focus after the AF operation if you keep holding down the shutter button halfway. You can magnify the area in focus and adjust the focus manually by turning the lens focusing ring. ] Disable in AF mode Manual focus adjustment is disabled when the lens’s focus mode switch is set to <...
Page 439 One-Shot AF release prior. You can specify whether to prioritize focus or release timing for One-Shot AF (except when shooting with Touch Shutter). ] Focus The picture will not be taken until focus is achieved. Useful when you want to achieve focus before capturing the image.
Page 440 Switching tracked subjects You can specify how easily the camera switches AF points to track subjects. Applies to Face+Tracking, Zone AF, or Large Zone AF (vertical or horizontal) AF methods. • Disable Tracks the subject initially determined for AF, to the extent possible. •...
Page 441 Lens drive when AF impossible You can specify lens operation that applies when autofocusing on a subject is not possible. ] Continue focus search If focus cannot be achieved with autofocus, the lens is driven to search for the precise focus.
Page 442 Limit AF methods You can limit the AF methods available to those that you will use. Select AF methods and press < > to add a checkmark [ ] and make them available. Select [OK] to register the setting. For details on AF methods, see Method.
Page 443 AF method selection control You can set how AF method selection methods are switched. →M-Fn button Press the < > button, then the < > button. Each press switches the AF method. →Main Dial Press the < > button, then turn the < >...
Page 444 Orientation linked AF point You can set separate AF points or Zone AF frames to use in vertical and horizontal shooting. ] Same for both vert/horiz The same AF points or Zone AF frames are used in both vertical and horizontal shooting.
Page 445 Initial Servo AF pt for You can set the initial AF point for Servo AF when the AF method is set to [ +Tracking]. Initial AF pt set for Servo AF starts from the manually set AF point when AF operation is set to [Servo AF] and the AF method is set to [ +Tracking].
Page 446 Focus ring rotation You can reverse the direction that the focusing ring of RF lens is rotated to adjust settings. ] Normal ] Reverse direction RF lens MF focus ring sensitivity You can set the sensitivity of the RF lens focusing ring. ] Varies with rotation speed Focusing ring sensitivity varies depending on rotation speed.
Page 447 sensitivity- AF pt select You can adjust Multi-controller sensitivity, which applies to AF point positioning.
Page 448 * Lenses supporting slow focus transition during movie recording USM and STM lenses released in and after 2009 are compatible. For details, refer to the Canon website. Caution With certain lenses, even if you adjust the AF speed, the speed may not change.
Page 449 Note Operation when inactive is equivalent to when [AF speed] is set to [Standard (0)]. An asterisk “*” to the right of [ : Movie Servo AF speed] indicates that the default setting has been modified. Movie Servo AF track sens. You can adjust the tracking sensitivity (to one of seven levels), which affects responsiveness if the subject strays from the AF point during Movie Servo AF, as when interfering objects move across AF points or when you pan.
Page 450 Selecting the Drive Mode Single and continuous drive modes are provided. You can select the drive mode suiting the scene or subject. Press the < > button ( With an image displayed on the screen, press the < > button. Select the drive mode item.
Page 451 Select the drive mode. Turn the < > dial to make a selection. ] Single shooting When you hold down the shutter button completely, only one shot will be taken. ] High-speed continuous shooting + When you hold down the shutter button completely, you can shoot continuously at max. approx.
Page 452 Caution Approx. 12 shots/sec. continuous shooting speed with [ ] is available under the following conditions. • Room temperature (23°C/73°F) • Battery level (LP-E6NH): At least approx. 60% (or using an optional Battery Grip BG-R10, a battery level of at least approx. 60% with two LP-E6NH) •...
Page 453 Using the Self-Timer Use the self-timer when you want to be in the picture such as a commemorative photograph. Press the < > button ( With an image displayed on the screen, press the < > button. Select the drive mode item. Turn the <...
Page 454 Take the picture. Focus on the subject, then press the shutter button completely. To check operation, look at the self-timer lamp, listen for beeps, or watch the countdown in seconds on the screen. Self-timer lamp blinking accelerates and the camera beeps quickly approx.
Page 455 Remote Control Shooting Remote Controller RC-6 Wireless Remote Control BR-E1 Remote Switch RS-80N3/TC-80N3 For remote control shooting, you can use an optional Remote Controller RC-6 (infrared) or Wireless Remote Control BR-E1 (Bluetooth), or an optional Remote Switch RS-80N3 or Timer Remote Controller TC-80N3 (both wired). Remote Controller RC-6 You can shoot remotely up to approx.
Page 456 Select the self-timer/remote control. Turn the < > dial to select the drive mode item, then turn the < > dial to select [ ] or [ Press the release (transmit) button on the remote controller. Point the remote controller toward the camera’s remote control sensor (1), then press the release (transmit) button.
Page 457 Caution Infrared remote controllers such as the RC-6 cannot be used for remote control shooting when the camera is paired via Bluetooth with a smartphone or wireless remote control. Fluorescent or LED lighting may trigger accidental shutter release. Try to keep the camera away from these light sources.
Page 458 Wireless Remote Control BR-E1 You can shoot remotely up to approx. 5 meters/16.4 feet from the camera. After pairing the camera and BR-E1 ( ), set the drive mode to [ ] or [ ] for still photo shooting ( ).
Page 459 Remote Switch RS-80N3/TC-80N3 Once connected to the camera, the switch enables you to shoot remotely over a wired connection. For operating instructions, refer to the accessory instruction manual. Open the terminal cover. Connect the plug to the remote control terminal.
Page 460 Playback This chapter covers topics related to playback—playing back captured still photos and movies—and introduces menu settings on the playback ([ ]) tab. Caution Normal display or selection on this camera may not be possible for images captured on other cameras, or images from this camera that have been edited or renamed on a computer.
Page 461 • Displaying the Highlight Alert • AF Point Display • Playback Grid • Movie Play Count • HDMI HDR Output...
Page 462 Tab Menus: Playback Playback 1 Protect images Erase images Rotate stills Change mov rotate info Rating Image copy Playback 2 Print order Photobook Set-up...
Page 463 Playback 3 RAW processing (RAW/DPRAW) DPRAW processing Resize Cropping HEIF→JPEG conversion Caution : RAW processing (RAW/DPRAW)], [ : DPRAW processing], and [ HEIF→JPEG conversion] are not displayed in [ ] or [ ] mode. Playback 4 Slide show Set image search conditions Magnificatn (apx) Image jump w/ Switch...
Page 464 Playback 5 Playback information display Highlight alert AF point disp. Playback grid Movie play count HDMI HDR output...
Page 465 Image Playback Single-Image Display Shooting Information Display Touch Playback Single-Image Display Switch to playback. Press the < > button. The last image captured or played back is displayed.
Page 466 Browse images. To play back images starting with your most recent shot, turn the < > dial counterclockwise. To play back images starting with the first captured image, turn the dial clockwise. Each time you press the < > button, the display will change. No information Basic information display Shooting information display...
Page 467 Note Lines indicating the image area are shown on RAW images captured with [ Cropping/aspect ratio] set to [1:1 (aspect ratio)], [4:3 (aspect ratio)], or [16:9 (aspect ratio)] ( If the search conditions are set with [ : Set image search conditions] ( ), only the filtered images will be displayed.
Page 468 Shooting Information Display With the shooting information screen displayed ( ), you can press < > up or down to view other information. You can also customize the information displayed, in [ : Playback information display] (...
Page 469 Touch Playback The camera features a touch-screen panel that you can touch to control playback. Supported touch operations are like those used with smartphones and similar devices. First, press the < > button to prepare for touch playback. Browse images Jump display Index display...
Page 470 Magnified view Note You can also magnify display by double-tapping with one finger.
Page 471 Magnified Image Display Setting the Initial Magnification Ratio and Position You can magnify display of your captured images. Magnify the image. Turn the < > dial clockwise. The magnified view will appear. The position of the magnified area (1) is displayed in the lower right of the screen, along with [ To magnify images, turn the <...
Page 472 Scroll the image. Use < > to scroll around the magnified image. Press the < > or < > button to exit magnified view. Note To switch to other images while maintaining magnified view, turn the < > dial. Magnification is not available for movies.
Page 473 Setting the Initial Magnification Ratio and Position You can set the initial magnification ratio and magnified position by selecting [ Magnificatn (apx)]. 2x, 4x, 8x, 10x (magnify from center) The magnified view starts at the image center at the selected magnification ratio. Actual size (from selected pt) The recorded image’s pixels will be displayed at approx.
Page 474 Index Display (Multiple-Image Display) Switch to the index display. During image playback, turn the < > dial counterclockwise. The 4-image index display will appear. The selected image is highlighted with an orange frame. Turning the < > dial further counterclockwise will switch the display from 9 to 36 to 100 images.
Page 476 Browse images. Use < > or the < > dial to move the orange frame for image selection. Press < > in the index display to display the selected image in the single-image display.
Page 477 Voice Memo Recording and Playback Recording Voice Memos Memo Audio Quality Playing Voice Memos You can add (record) voice memos to your shots. Voice memos are recorded as WAV audio files with the same file number as the image. They can be played back by the camera or a computer.
Page 478 Record a voice memo. Hold down the < > button for approx. 2 sec. Keep holding down the button after [Recording memo...] appears, and speak into the voice memo microphone (1). Each recording can be up to approx. 30 sec. To end the voice memo, release the button.
Page 479 Caution Voice memos cannot be added to movies or protected images. Voice memos cannot be recorded with an external microphone. Note Audio quality of voice memo recording can be changed in [ : Memo audio quality]. To record voice memos longer than 30 sec., repeat step 3. You can record a single voice memo during image review (immediately after shooting) by following step 3.
Page 480 Memo Audio Quality You can set the audio quality for recording voice memos. Select [ : Memo audio quality]. Select an option. 48 kHz: High quality (48 kHz) Enables voice memo recording at the same level of audio quality as movies.
Page 481 Playing Voice Memos Select [ button function]. Select [Play memo(Hold:Rec. memo)]. Select an image for voice memo playback. Press the < > button to switch to image playback. Turn the < > dial to select an image labeled with a [ ] icon at the top of the screen.
Page 482 Play back the voice memo. (1) Speaker Press the < > button to play the voice memo. You can adjust the sound volume by turning the < > dial. To stop playback, press the < > button. Note Multiple voice memos added to an image are played back consecutively. Added voice memos cannot be erased by themselves using the camera.
Page 483 Movie Playback Switch to playback. Press the < > button. Select a movie. Turn the < > dial to select a movie to play. In single-image display, the [ ] icon displayed in the upper left of the screen indicates a movie. In index display, perforations at the left edge of a thumbnail indicate a movie.
Page 484 In the single-image display, press < >. Press < > to play back the movie. The movie will start playing back. You can pause playback and display the movie playback panel by pressing < >. Press it again to resume the playback. Turn the <...
Page 485 Movie playback panel Item Playback Operations Playback Pressing < > toggles between playback and stop. Adjust the slow motion speed by turning the < > dial. The slow Slow motion motion speed is indicated in the upper right of the screen. Skip backward Skips backward approx.
Page 486 Editing a Movie’s First and Last Scenes You can edit out the first and last scenes of a movie in approx. 1-sec. increments. In single-image display, press < >. On the movie playback panel, select [...
Page 487 Specify the part to be edited out. Select either [ ] (Cut beginning) or [ ] (Cut end). Press < > left or right to go back or forward one frame. Keep pressing the multi-controller to fast rewind or fast forward frames. Each turn of the <...
Page 488 You cannot edit a movie when the camera is connected to a computer. Compress and save is not available for movies recorded with [HDR shooting ] set to [Enable] or [Canon Log] set to [On], for movies recorded in (NTSC) or (PAL) sizes, or for movies.
Page 489 4K/8K Movie Frame Grab From 4K or 8K movies, you can select individual frames to save as JPEG or HEIF still images. This function is called “Frame Grab.” Select a 4K or 8K movie. Turn the < > dial to select a movie in 4K or 8K quality. On the shooting information screen ( ), 4K movies are labeled with ], [...
Page 490 Frame grabbing is not possible from the following 4K movies, or from 8K movies. • RAW movies • Movies recorded with [ : Canon Log settings] set to [On] • Movies recorded with other cameras Frame grabbing is not possible while the camera is connected to a computer.
Page 491 Playback on a TV Set By connecting the camera to a television with a commercially available HDMI cable, you can play back the captured still photos and movies on the television. If the image does not appear on the TV screen, confirm that [ : Video system] is correctly set to [For NTSC] or [For PAL] (depending on the video system of your television).
Page 492 Press the < > button. Images are now displayed on the television, with nothing displayed on the camera screen. The images will automatically be displayed at the optimum resolution matching the connected television. Caution Adjust movie sound volume with the television. The sound volume cannot be adjusted with the camera.
Page 493 Protecting Images Protecting Individual Images via the Menu Specifying the Range of Images to Protect Protecting All Images in a Folder or on a Card You can protect important images from being accidentally erased. Caution If you format the card ( ), the protected images will also be erased.
Page 494 Select [Select images]. Select the image to protect. Turn the < > dial to select an image to protect. Protect the image. Press < > to protect the selected image, after which it will be labeled with a [ ] icon (1) at the top of the screen. To cancel protection and clear the [ ] icon, press <...
Page 495 Specifying the Range of Images to Protect While looking at the images in the index display, you can specify the first and last images for a range to protect all the specified images at once. Select [Select range]. Select [Select range] in [ : Protect images].
Page 496 Protecting All Images in a Folder or on a Card You can protect all the images in a folder or on a card at once. When you select [All images in folder] or [All images on card] in [ : Protect images], all the images in the folder or on the card will be protected.
Page 497 Erasing Images Erasing Images Individually Selecting ([ ]) Multiple Images to Erase Together Specifying the Range of Images to Erase Erasing All Images in a Folder or on a Card You can either select and erase unnecessary images individually or erase them in one batch.
Page 498 Erase the images. JPEG/HEIF/RAW images or movies Select [Erase]. RAW+JPEG/RAW+HEIF images Select an option. Note You can erase individual images during playback by pressing the < > button when [ button function] is assigned to [Erase images] (...
Page 499 Selecting ([ ]) Multiple Images to Erase Together By adding checkmarks to the images to be erased, you can erase all those images at once. Select [ : Erase images]. Select [Select and erase images]. Select an image. Turn the < >...
Page 500 Erase the images. Press the < > button, then press [OK].
Page 501 Specifying the Range of Images to Erase While looking at the images in the index display, you can specify the first and last images for a range to erase all the specified images at once. Select [Select range]. Select [Select range] in [ : Erase images].
Page 502 Erase the images. Select [OK].
Page 503 Erasing All Images in a Folder or on a Card You can erase all the images in a folder or on a card at once. When you select [All images in folder] or [All images on card] in [ : Erase images], all the images in the folder or on the card will be erased.
Page 504 Rotating Still Photos You can use this feature to rotate the displayed image to the desired orientation. Select [ : Rotate stills]. Select an image to rotate. Turn the < > dial to select the image.
Page 505 Rotate the image. Each time you press < >, the image will rotate clockwise as follows: 90°→270°→0°. To rotate another image, repeat steps 2 and 3. Note If you set [ : Auto rotate] to [On ) before taking pictures, you need not rotate the image with this function.
Page 506 Changing Movie Orientation Information You can manually edit movie playback orientation information (which determines which side is up). Select [ : Change mov rotate info]. Select a movie. Turn the < > dial to select a movie with orientation information to change.
Page 507 Change the orientation information. As you watch the camera and icon in the upper left of the screen, press < > to specify which side is up. Each press of < > edits the movie rotation information as follows: [ ] →...
Page 508 Rating Images Rating Individual Images With the < > Button Rating Individual Images via the Menu Rating by Specifying the Range Rating All Images in a Folder or on a Card You can rate images on a scale of 1–5 ( ).
Page 509 Note In the detailed settings for [Rating (Hold: (rec memo))] in [ button function], you can select the rating to apply.
Page 510 Rating Individual Images via the Menu Select [ : Rating]. Select [Select images]. Select the image to be rated. Turn the < > dial to select the image to be rated.
Page 511 Rate the image. Press < >, and a blue highlight frame will appear as shown in the screen shown above. Turn the < > dial to select a rating mark, then press < >. When you append a rating mark to the image, the number beside the set rating will increase by one.
Page 512 Rating by Specifying the Range While looking at the images in the index display, you can specify the first and last images for a range to rate all the specified images at once. Select [Select range]. Select [Select range] in [ : Rating].
Page 513 Rate the images. Turn the < > dial to select a rating mark, then select [OK]. All the images in the specified range will be rated (same rating) at once.
Page 514 Rating All Images in a Folder or on a Card You can rate all the images in a folder or on a card at once. Under [ : Rating], when you select [All images in folder] or [All images on card], all the images in the folder or on the card will be rated.
Page 515 Note Values next to ratings are displayed as [###] if more than 1,000 images have that rating. With [ : Set image search conditions] and [ : Image jump w/ ], you can display only the images given a specific rating.
Page 516 Copying Images Copying Individual Images Copying a Range of Images Copying All Images in a Folder or on a Card You can copy the images on one card to the other card to save duplicates. All images in a folder or on a card can also be copied at the same time. Caution If the target folder or card already has an image with the same file number, [Skip image and continue], [Replace existing image], and [Cancel copy] are...
Page 517 Copying Individual Images Select [ : Image copy]. Select [Sel.Image]. Check the source and target card numbers and the free space on the target card. Select [Sel.Image], then press < >.
Page 518 Select the folder. (1) Number of images in folder (2) Lowest file number (3) Folder name (4) Highest file number Select the source folder, then press < >. When selecting the folder, refer to the images displayed at right of the screen.
Page 519 Press the < > button. Select [OK]. Check the target card, then select [OK]. Select the target folder. Select the folder to copy the image to, then press < >. To create a new folder, select [Create folder].
Page 520 Select [OK]. Check the information about the source and target card, then select [OK]. Results are displayed after copying is finished. Select [OK] to return to the screen in step 2.
Page 521 Copying a Range of Images You can copy all specified images at once by selecting the first and last images in a range as you look at images in the index display. Select [Range]. Select the folder. Select the source folder, then press < >.
Page 522 Specify the range of images. Select the first image (start point). Next, select the last image (end point). A checkmark [ ] will be appended to all the images within the range between first and last images. To select another image to copy, repeat step 3.
Page 523 Copying All Images in a Folder or on a Card You can copy all the images in a folder or on a card at once. Selecting [Sel. ] or [All images] in [ : Image copy] copies all the images it contains.
Page 524 Print Ordering (DPOF) Print Options Selecting Images for Printing DPOF (Digital Print Order Format) enables you to print images recorded on the card according to your printing instructions such as the image selection, quantity to print, etc. You can print multiple images in one batch or create a print order for a photofinisher. You can set the print settings such as print type, date imprinting, file number imprinting, etc.
Page 525 Set the options as desired. Set [Print type], [Date], and [File No.] options. Standard Prints one image on one sheet. Multiple thumbnail images are printed Index Print type on one sheet. Prints both the standard and index Both prints. [On] imprints the recorded date of the captured Date image.
Page 526 Caution If you print an image with a large image size using the [Index] or [Both] setting ), the index print may not be printed with certain printers. In this case, resize the image ( ), then print the index print. Even if [Date] and [File No.] are set to [On], the date or file number may not be imprinted, depending on the print type setting and printer.
Page 527 Selecting Images for Printing Sel.Image Select and specify the images individually. Press the < > button to save the print order to the card. Standard/Both (1) Quantity (2) Total images selected Press < > to print a copy of the displayed image. By turning the < >...
Page 528 Multiple Select range Select [Select range] in [Multiple]. Selecting the first and last images of the range marks all the images in the range with a checkmark [ ], and one copy of each image will be specified for printing. All images in a folder Select [Mark all in folder] and select the folder.
Page 529 Photobook Set-up Specifying Individual Images via the Menu Specifying the Image Range for a Photobook Specifying All Images in a Folder or Card You can specify up to 998 images to be printed in a photobook. When you use EOS Utility (EOS software) to import images to a computer, the specified images for a photobook will be copied to a dedicated folder.
Page 530 Select the image to be specified. Use the < > dial to select the image to be specified for a photobook, then press < >. To select other images to be specified for a photobook, repeat step 3.
Page 531 Specifying the Image Range for a Photobook While looking at the images in the index display, you can specify the range (start point to end point) of images to be specified for a photobook at once. Select [Multiple]. Select [Multiple] in [ : Photobook Set-up].
Page 532 Specify the range of images. Select the first image (start point). Next, select the last image (end point). A checkmark [ ] will be appended to all the images within the range between first and last images.
Page 533 Specifying All Images in a Folder or Card You can specify all the images in a folder or on a card at once for a photobook. All images in the folder or on the card are specified for the photobook when you select [All images in folder] or [All images on card] in the [Multiple] option for [ : Photobook Set- up].
Page 534 RAW Processing (RAW/DPRAW) Magnified View Processing Images with Specified Aspect Ratios RAW Image Processing Options You can process images with the camera to create JPEG or HEIF images. RAW images are not affected, so different conditions can be applied to create JPEG or HEIF images.
Page 535 Select an option, then select images. You can select multiple images to process at once. Select images Turn the < > dial to select images to process, then press < >. Press the < > button. Select range Select the first image (start point). Next, select the last image (end point).
Page 536 Set the desired processing conditions. Use shot settings Images are processed using image settings at the time of capture. Images captured with [ : HDR PQ settings] set to [Enable] are processed to create HEIFs, and images captured with this function set to [Disable] are processed to create JPEGs.
Page 537 Save. When using [Set up processing→JPEG] or [Set up processing→HEIF], select [ ] (Save). Read the message and select [OK]. To process other images, select [Yes] and repeat steps 2–4. Select the image to display. Select [Original image] or [Processed img.]. Your selected image is displayed.
Page 538 Caution Results of processing with [Digital Lens Optimizer] set to [High] are only applied in magnified view. Results are not applied in normal display.
Page 539 Processing Images with Specified Aspect Ratios JPEG or HEIF images at the specified aspect ratio are created when you process RAW images shot with [ Cropping/aspect ratio] ( ) set to [1:1 (aspect ratio)], [4:3 (aspect ratio)], or [16:9 (aspect ratio)].
Page 540 RAW Image Processing Options Brightness adjustment You can adjust the image brightness up to ±1 stop in 1/3-stop increments. White balance ( You can select the white balance. Selecting [ ] enables you to select [Auto: Ambience priority] or [Auto: White priority]. If you select [ ], you can set the color temperature.
Page 541 Image quality ( You can set the image quality when creating a JPEG or HEIF image. Color space ( You can select either sRGB or Adobe RGB. Since the camera screen is not compatible with Adobe RGB, the difference in the image will hardly be perceptible when either color space is set.
Page 542 • Diffraction correction ( The diffraction by the lens aperture degrading the image sharpness can be corrected. If [Enable] is set, the corrected image will be displayed. If the effect is difficult to discern, magnify the image ( Caution Processing RAW images in the camera will not produce exactly the same results as processing RAW images with Digital Photo Professional (EOS software).
Page 543 DPRAW Processing Portrait Relighting Background Clarity When you use the camera in RAW image processing ( ) for images captured with Dual Pixel RAW enabled ( ), dual pixel data and detailed face information can be used in image correction. Portrait Relighting Oblique or insufficient lighting on human subjects can be corrected by applying a virtual light source.
Page 544 Select [Portrait relighting]. Turn the < > dial to select an image to adjust, then press < >.
Page 545 Adjust the image. Select [ ], then press < >. Adjust the image, then press < >. (1) Use < > to position the light source. (2) represents the position of the selected face. By adjusting (1) relative to (2), you can adjust the direction of lighting. Overlapping positions of (1) and (2) place the light source directly in front of the face.
Page 546 Comparison screen You can switch between the [After change] and [Shot settings] screens by pressing the [ ] button, then turning the < > dial. Items in orange on the [After change] screen have been modified since the time of capture. Caution Selection is possible from up to 10 people.
Page 547 Background Clarity To adjust hazy backgrounds in images of people and landscapes, you can set the level of clarity in a range of 0–4. For clarity adjustment in RAW image processing, you can set the level of image edge contrast in a range of -4 to +4. Select [ : DPRAW processing].
Page 548 Adjust the image. Select < >, then press < >. With < > selected, you can select the level by turning the < > or < > dial without pressing < >. Turn the < > or < > dial to select the level, then press < >.
Page 549 Save. Select [ ] (Save), read the message, and select [OK]. Note For settings other than [Portrait relighting] and [Background clarity], you can specify processing based on setting items of [ : RAW image processing] ( Caution Portrait relighting and background clarity HEIF images cannot be processed this way.
Page 550 Resizing JPEG/HEIF Images You can resize a JPEG or HEIF image to reduce the pixel count and save it as a new image. Resizing is available for , , or JPEGs or HEIFs (sizes except ), including those captured in RAW+JPEG and RAW+HEIF shooting. images and RAW images or movies cannot be resized.
Page 551 Select the desired image size. Press < > to display the image sizes. Select the desired image size (1). Save. Select [OK] to save the resized image. Check the destination folder and image file number, then select [OK]. To resize another image, repeat steps 2 to 4.
Page 552 Cropping JPEG/HEIF Images You can crop a captured JPEG image and save it as another image. Cropping is available for JPEG or HEIF images. RAW images and frame-grab images from 4K or 8K movies cannot be cropped. Select [ : Cropping]. Select an image.
Page 553 Set the cropping frame. The image area within the cropping frame will be cropped. Resizing the cropping frame size Turn the < > dial to resize the cropping frame size. The smaller the cropping frame, the more magnified the cropped image will look. Correcting tilt You can correct image tilt by ±10°.
Page 554 Save. Turn the < > dial to select [ ], then press < >. Select [OK] to save the cropped image. Check the destination folder and image file number, then select [OK]. To crop another image, repeat steps 2 to 5. Caution The position and size of the cropping frame may change depending on the angle set for tilt correction.
Page 555 Converting HEIF to JPEG You can convert HEIF images captured in HDR shooting and save them as JPEG images. Select [ : HEIF→JPEG conversion]. Select an image. Turn the < > dial to select an HEIF image to convert to JPEG. Press <...
Page 556 Save. Select [OK] to save the JPEG image. • Check the destination folder and image file number, then select [OK]. • To convert another image, repeat steps 2 and 3. Note Some scenes may look different after conversion (if original and converted images are compared).
Page 557 Slide Show You can play back the images on the card as an automatic slide show. Specify the images to be played back. To play back all the images on the card, go to step 2. If you want to specify the images to be played back in the slide show, filter the images with [ : Set image search conditions] ( Select [...
Page 558 Set the playback as desired. Select [Set up]. Set the [Display time] and [Repeat] (repeated playback) settings for the still photos. After completing the settings, press the < > button. Display time Repeat...
Page 559 Start the slide show. Select [Start]. After [Loading image...] is displayed, the slide show will start. Exit the slide show. To exit the slide show and return to the setting screen, press the < > button. Note To pause the slide show, press < >.
Page 560 Setting Image Search Conditions Clearing the Search Conditions You can filter image display according to your search conditions. After setting the image search conditions, you can play back and display only the found images. You can also protect, rate, play a slide show, erase, and apply other operations to filtered images. Select [ : Set image search conditions].
Page 561 Set the search conditions. Turn the < > dial to select an option. Turn the < > dial to set the option. A checkmark [ ] (1) is appended to the left of the option. (Specified as the search condition.) If you select the option and press the <...
Page 562 Apply the search conditions. Press < > and read the message displayed. Select [OK]. The search condition is applied. Display the found images. Press the < > button. Only the images that match the set conditions (filtered) will be played back.
Page 563 Note Search conditions may be cleared after operations involving camera power or card changes and editing, adding, or erasing images. Auto power off time may be extended while the [ : Set image search conditions] screen is displayed. Clearing the Search Conditions Access the screen in step 2, then press the <...
Page 564 Browsing Images with the Main Dial In single-image display, you can turn the < > dial to jump through the images forward or backward according to the jump method set. Select [ : Image jump w/ Select the jump method. Note With [Jump images by the specified number], you can turn the <...
Page 565 Browse by jumping. (1) Jump method (2) Playback position Press the < > button. In single-image display, turn the < > dial. You can browse by the jump method set.
Page 566 Switching the Main Dial and Quick Control Dial 2 You can switch the functions assigned to these dials, as used on the image playback screen. Select [ : Switch Select an option. [Disable] Image jump Magnify/Index view [Enable] Magnify/Index view Image jump Note Corresponding icons in menus and on screens such as the Quick Control and...
Page 567 Rate/Voice Memo Button Function You can assign image rating/protection/erasure or voice memo recording/playback to the < > button. Select [ button function].
Page 568 Select an option. / : Rating (Hold: (rec memo)) Assigns rating to the < > button. (Default setting.) You can press the < > button to select the rating to use. During playback, you can rate images or clear ratings by pressing the <...
Page 569 Customizing Playback Information Display Histogram You can specify screens and accompanying information displayed during image playback. Select [ : Playback information display]. Add a checkmark [ ] next to the number of screens to display. Select numbers with the < >...
Page 570 Histogram The histograms show signal levels across the tonal range. Brightness display (for checking the general exposure level and overall gradation) and RGB display (for checking saturation and gradation of red, green, and blue) are available. You can switch the histogram displayed by pressing the <...
Page 571 [Brightness] display This histogram is a graph showing the distribution of the image’s brightness level, with the horizontal axis indicating the brightness level (darker on the left and brighter on the right) and the vertical axis indicating the pixel count at each brightness level. The more pixels there are toward the left, the darker the image, and the more pixels there are toward the right, the brighter the image.
Page 572 [RGB] display This histogram is a graph showing the distribution of each primary color’s brightness level in the image (RGB or red, green, and blue), with the horizontal axis indicating the color’s brightness level (darker on the left and brighter on the right) and the vertical axis indicating the pixel count at each color brightness level.
Page 573 Displaying the Highlight Alert You can specify blinking display of overexposed highlights on the playback screen. To obtain more detailed gradation in the blinking areas where you want the gradation to be faithfully reproduced, set the exposure compensation to a negative amount and shoot again for a better result.
Page 574 AF Point Display You can display the AF points that were used to focus, which will be outlined in red on the playback screen. If automatic AF point selection is set, multiple AF points may be displayed. Select [ : AF point disp.]. Select [Enable].
Page 575 Playback Grid You can display a grid over still photos shown in single-image display on the playback screen. This function is convenient for checking the image’s vertical or horizontal tilt as well as composition. Select [ : Playback grid]. Select an option.
Page 576 Movie Play Count You can select how time is displayed on the movie playback screen. Select [ : Movie play count].
Page 577 Select an option. Rec time Displays the recording or playback time during movie playback. Time code Displays the time code during movie playback. Note Time codes are always recorded to movie files (except for High Frame Rate movies set to [Free run]), regardless of the [Movie rec count] setting. The [Movie play count] setting in [ : Time code] is linked to the [ : Movie...
Page 578 HDMI HDR Output You can view RAW or HEIF images in HDR by connecting the camera to an HDR TV. Select [ : HDMI HDR output]. Select [On]. Note Make sure the HDR TV is set up for HDR input. For details on how to switch inputs on the TV, refer to the TV manual.
Page 579 Caution Important Note that Canon cannot be held liable for any loss or damage caused by erroneous wireless communication settings when using the camera. In addition, Canon cannot be held liable for any other loss or damage caused by use of the camera.
Page 580 Tab Menus: Wireless Features Wireless features 1 Wi-Fi/Bluetooth connection Airplane mode Wi-Fi settings Bluetooth settings Nickname GPS device settings Image transfer Wireless features 2 Reset communication settings...
Page 581 Caution Wireless communication is not available while the camera is connected via an interface cable to a computer or other device. Other devices, such as computers, cannot be used with the camera by connecting them with an interface cable while the camera is connected to devices via Wi-Fi. The camera cannot be connected via Wi-Fi if there is no card in it (except for [ ], or [ The Wi-Fi connection will be terminated if you set the camera’s power to <...
Page 582 Wi-Fi/Bluetooth Connection Select [ : Wi-Fi/Bluetooth connection]. Select an option for the camera to connect to. Connect to smartphone ( Control the camera remotely and browse images on the camera over a Wi-Fi connection by using the dedicated Camera Connect app on smartphones or tablets (collectively referred to as “smartphones”...
Page 583 Images can be sent automatically to the image.canon cloud service for Canon customers after you complete member registration (free of charge). Original files of images sent to image.canon are retained for 30 days, without storage limitations, and can be downloaded to computers or transferred to other Web services.
Page 584 Connecting to a Smartphone Turning on Bluetooth and Wi-Fi on a Smartphone Installing Camera Connect on a Smartphone Connecting to a Bluetooth-Compatible Smartphone via Wi-Fi Camera Connect Functions Maintaining a Wi-Fi Connection When the Camera Is Off Canceling the Pairing Wi-Fi Connection without Using Bluetooth Automatic Image Transfer as You Shoot Sending Images to a Smartphone from the Camera...
Page 585 Turning on Bluetooth and Wi-Fi on a Smartphone Turn on Bluetooth and Wi-Fi from the smartphone settings screen. Note that pairing with the camera is not possible from the smartphone’s Bluetooth settings screen. Note To establish a Wi-Fi connection via an access point, see Wi-Fi Connection via Access Points.
Page 586 Installing Camera Connect on a Smartphone The dedicated app Camera Connect (free of charge) must be installed on the smartphone on which Android or iOS is installed. Use the latest version of the smartphone OS. Camera Connect can be installed from Google Play or App Store. Google Play or App Store can also be accessed using the QR codes that appear when the camera is paired or connected via Wi-Fi to a smartphone.
Page 587 Connecting to a Bluetooth-Compatible Smartphone via Wi-Fi Steps on the camera (1) Select [ : Wi-Fi settings]. Select [Enable]. Select [ : Bluetooth settings].
Page 588 Select [Enable]. Select [Wi-Fi/Bluetooth connection]. Select [ Connect to smartphone].
Page 589 Select [Add a device to connect to]. Select an option. If Camera Connect is already installed, select [Do not display]. If Camera Connect is not installed, select [Android] or [iOS], scan the displayed QR code with the smartphone to access Google Play or App Store and install Camera Connect.
Page 590 Select [Pair via Bluetooth]. Press < > to start pairing. To pair with a different smartphone after pairing with one initially, select [OK] on the screen shown above.
Page 591 Steps on the smartphone (1) Start Camera Connect. Tap the camera for pairing. In Android, go to Steps on the camera (2). Tap [Pair] (iOS only).
Page 592 Steps on the camera (2) Select [OK]. Press the < > button. Pairing is now complete, and the camera is connected to the smartphone via Bluetooth. A Bluetooth icon appears on the main Camera Connect screen.
Page 593 Caution The camera cannot be connected to two or more devices at the same time via Bluetooth. To switch to a different smartphone for the Bluetooth connection, see Changing or Deleting Connection Settings. Bluetooth connection consumes battery power even after the camera’s auto power off is activated.
Page 594 Steps on the smartphone (2) Tap a Camera Connect function. In iOS, tap [Join] when a message is displayed to confirm camera connection. For the Camera Connect functions, see Camera Connect Functions. When a Wi-Fi connection is established, the screen for the selected function will appear.
Page 595 [ Wi-Fi on] screen Disconnect,exit Terminates the Wi-Fi connection. Confirm set. You can check the settings. Error details When a Wi-Fi connection error occurs, you can check the details of the error.
Page 596 Camera Connect Functions Images on camera Images can be browsed, deleted, or rated. Images can be saved on a smartphone. Remote live view shooting Enables remote shooting as you view a live image on the smartphone. Auto transfer Enables camera and app setting adjustment for automatic transfer of your shots ( Bluetooth remote controller Enables remote control of the camera from a smartphone paired via Bluetooth.
Page 597 Maintaining a Wi-Fi Connection When the Camera Is Off Even when the camera power switch is set to < >, as long as it is paired to a smartphone via Bluetooth, you can use the smartphone to connect via Wi-Fi and browse images on the camera or perform other operations.
Page 598 Canceling the Pairing Cancel pairing with a smartphone as follows. Select [ : Wi-Fi/Bluetooth connection]. Select [ Connect to smartphone]. If the history ( ) is displayed, switch screens with the < > < > dial or < >. Select [Edit/delete device].
Page 599 Select the smartphone to cancel pairing with. Smartphones currently paired with the camera are labeled [ ]. Select [Delete connection information]. Select [OK]. Clear the camera information on the smartphone. In the smartphone’s Bluetooth setting menu, clear the camera information registered on the smartphone.
Page 600 Wi-Fi Connection without Using Bluetooth Steps on the camera (1) Set Wi-Fi settings to [Enable]. See steps 1–2 in Connecting to a Bluetooth-Compatible Smartphone Wi-Fi. Select [ : Wi-Fi/Bluetooth connection]. Select [ Connect to smartphone]. If the history ( ) is displayed, switch screens with the < >...
Page 601 Select [Add a device to connect to]. Select an option. If Camera Connect is already installed, select [Do not display]. Select [Connect via Wi-Fi].
Page 602 Check the SSID (network name) and password. Check the SSID (1) and Password (2) displayed on the camera screen. Note By selecting [Switch network] in step 7, you can establish a Wi-Fi connection via an access point (...
Page 603 Steps on the smartphone Operate the smartphone to establish a Wi-Fi connection. Smartphone’s screen (sample) Activate the smartphone’s Wi-Fi function, then tap the SSID (network name) checked in step 7 in Steps on the camera (1). For the password, enter the password checked in step 7 in Steps on the camera (1).
Page 604 Steps on the camera (2) Select [OK]. To specify viewable images, press the < > button. Configure as described in Settings to Make Images Viewable from Smartphones, starting in step 5. The main window of Camera Connect will be displayed on the smartphone.
Page 605 Automatic Image Transfer as You Shoot Your shots can be automatically sent to a smartphone. Before following these steps, make sure the camera and smartphone are connected via Wi-Fi. Select [ : Wi-Fi settings]. Select [Send to smartphone after shot]. Set [Auto send] to [Enable].
Page 606 Set [Size to send]. Take the picture.
Page 607 Sending Images to a Smartphone from the Camera You can use the camera to send images to a smartphone paired via Bluetooth (Android devices only) or connected via Wi-Fi. Switch to playback. Press the < > button. Select [ Send images to smartphone]. If you perform this step while connected via Bluetooth, a message is displayed, and the connection switches to a Wi-Fi connection.
Page 608 (1) Sending images individually Select an image to send. Use the < > dial to select an image to send, then press < >. You can turn the < > dial counterclockwise to select the image using the index display. Select [Send img shown].
Page 609 (2) Sending multiple selected images Press < >. Select [Send selected].
Page 610 Select images to send. Use the < > dial to select images to send, then press < >. You can turn the < > dial counterclockwise to switch to select the images from 3-image display. To return to single-image display, turn the <...
Page 611 Select [Size to send]. On the displayed screen, select an image size. When sending movies, select the image quality in [Quality to send]. Select [Send].
Page 612 (3) Sending a specified range of images Press < >. Select [Send range]. Specify the range of images. Select the first image (start point). Select the last image (end point). To cancel the selection, repeat this step. To change the number of images in index display, turn the < >...
Page 613 Confirm the range. Press the < > button. Select [Size to send]. On the displayed screen, select an image size. When sending movies, select the image quality in [Quality to send]. Select [Send].
Page 614 (4) Sending all images on the card Press < >. Select [Send all card].
Page 615 Select [Size to send]. On the displayed screen, select an image size. When sending movies, select the image quality in [Quality to send]. Select [Send].
Page 616 (5) Sending images that match the search conditions Send all the images that match the search conditions set in [Set image search conditions] at once. For details on [Set image search conditions], see Setting Image Search Conditions. Press < >. Select [Send all found].
Page 617 Select [Size to send]. On the displayed screen, select an image size. When sending movies, select the image quality in [Quality to send]. Select [Send].
Page 618 Ending image transfer Sending images from the camera when paired via Bluetooth (Android devices only) Press the < > button on the image transfer screen. Select [OK] to end image transfer and the Wi-Fi connection. Sending images from the camera over a Wi-Fi connection Press the <...
Page 619 Note You can cancel the image transfer by selecting [Cancel] during the transfer. You can select up to 999 files at a time. With a Wi-Fi connection established, disabling the smartphone’s power saving function is recommended. Selecting the reduced size for still photos applies to all still photos sent at that time. Note that size still photos are not reduced.
Page 620 Terminating Wi-Fi Connections Perform either of the following operations. On the Camera Connect screen, tap [ ]. On the [ Wi-Fi on] screen, select [Disconnect,exit]. If the [ Wi-Fi on] screen is not displayed, select [ : Wi-Fi/Bluetooth connection]. Select [Disconnect,exit], then select [OK] on the confirmation screen.
Page 621 Settings to Make Images Viewable from Smartphones Images can be specified after the Wi-Fi connection is terminated. Select [ : Wi-Fi/Bluetooth connection]. Select [ Connect to smartphone]. If the history ( ) is displayed, switch screens with the < > < >...
Page 622 Select a smartphone. Select the name of the smartphone on which you want to make the images viewable. Select [Viewable imgs].
Page 623 Select an option. Select [OK] to access the setting screen. [All images] All images stored on the card become viewable. [Images from past days] Specify viewable images on the shooting-date basis. Images shot up to nine days ago can be specified. When [Images shot in past days] is selected, images shot up to the specified number of days before the current date become viewable.
Page 624 [Select by rating] Specify viewable images depending on whether a rating is appended (or not appended) or by the type of rating. Once you select the type of rating, the viewable images are set. [File number range] (Select range) Select the first and last images from images arranged by the file number to specify the viewable images.
Page 625 Caution If the Wi-Fi connection is terminated while recording a movie with remote shooting, the following will occur. • Any movie recording in progress in movie recording mode will continue. • Any movie recording in progress in still photo shooting mode will end. With a Wi-Fi connection to a smartphone established, certain functions are unavailable.
Page 626 Connecting to a Computer via Wi-Fi Operating the Camera Using EOS Utility Direct Transfer Creating and Registering Captions This section describes how to connect the camera to a computer via Wi-Fi and perform camera operations using EOS Utility (EOS software). Install the latest version of EOS Utility on the computer before setting up a Wi-Fi connection.
Page 627 Select [ Remote control (EOS Utility)]. If the history ( ) is displayed, switch screens with the < > < > dial or < >. Select [Add a device to connect to]. Check the SSID (network name) and password. Check the SSID (1) and password (2) displayed on the camera screen.
Page 628 Steps on the computer (1) Select the SSID, then enter the password. Computer’s screen (sample) On the computer’s network setting screen, select the SSID checked in step 5 in Steps on the camera (1). For the password, enter the password checked in step 5 in Steps on the camera (1).
Page 629 Steps on the camera (2) Select [OK]. The following message is displayed. “******” represents the last six digits of the MAC address of the camera to be connected. Steps on the computer (2) Start EOS Utility. In EOS Utility, click [Pairing over Wi-Fi/LAN]. If a firewall-related message is displayed, select [Yes].
Page 630 Click [Connect]. Select the camera to connect to, then click [Connect]. Steps on the camera (3) Establish a Wi-Fi connection. Select [OK].
Page 631 [ Wi-Fi on] screen Disconnect,exit Terminates the Wi-Fi connection. Confirm set. You can check the settings. Error details When a Wi-Fi connection error occurs, you can check the details of the error. The Wi-Fi connection to a computer is now complete. Operate the camera using EOS Utility on the computer.
Page 632 Direct Transfer With the camera connected to EOS Utility and the main EOS Utility window displayed, you can use the camera to transfer images to computer. Selecting images to transfer Select [ : Image transfer]. Select [Image sel./transfer]. Select [Direct transfer].
Page 633 Select [Sel.Image]. Select images to transfer. Use the < > dial to select an image to transfer, then press < >. Use the < > dial to add a checkmark [ ] in the upper left of the screen, then press < >.
Page 634 Select [OK]. The selected images are transferred to the computer.
Page 635 Selecting multiple images Multiple images can be transferred at once after you choose a selection method. Access the [Image sel./transfer] screen. Follow steps 1–3 in Selecting Images to Transfer. Select [Multiple]. Select a selection method to use. Select range • Select [Select range]. Selecting the first and last images of the range marks all the images in the range with a checkmark [ ], and one copy of each image will be sent.
Page 636 In a folder • Selecting [Folder images failed transf.] selects all images in the selected folder for which transfer failed. • Selecting [Folder images not transfer'd] selects all unsent images in the selected folder. • Selecting [Clear folder transf. history] clears the transfer history of images in the selected folder.
Page 637 Select [OK]. The selected images are transferred to the computer.
Page 638 Transferring RAW+JPEG or RAW+HEIF images For RAW+JPEG or RAW+HEIF images, you can specify which image to transfer. Select [ : Image transfer]. Select the type of images to transfer.
Page 639 RAW+JPEG transfer • Select [RAW+JPEG transfer], then select [JPEG only], [RAW only], or [RAW+JPEG]. RAW+HEIF transfer • Select [RAW+HEIF transfer], then select [HEIF only], [RAW only], or [RAW+HEIF]. Caution Some menu items are not available during image transfer. Note This setting is linked to [RAW+JPEG transfer] and [RAW+HEIF transfer] settings on the [Transfer type/size] screen (...
Page 640 Creating and Registering Captions You can create captions and register them on the camera to use them as described in Adding a Caption Before Transfer. Start EOS Utility and select [Camera settings]. Select [WFT Captions]. Enter the caption or captions. Enter up to 31 characters (in ASCII format).
Page 641 Set the captions on the camera. Select [Apply to camera] to set your new captions on the camera.
Page 642 This section describes how to send images to image.canon. Registering Image.Canon and Setting Up Auto Send You can register image.canon on the camera and prepare to send your shots automatically. A computer or smartphone with a browser and internet connection is required.
Page 643 Select [ Upload to Web service]. Select [I Agree]. Establish a Wi-Fi connection. Connect to an access point via Wi-Fi. Go to step 6 in Wi-Fi Connection via Access Points.
Page 644 Enter your email address. Enter your email address, then select [OK]. Enter a four-digit number. Enter a four-digit number of your choice, then select [OK].
Page 645 Select [OK]. The [ ] icon changes to [ Steps on the computer or smartphone Set up camera web link. Access the page in the notification message. Follow the instructions to complete the settings on the camera web link settings page.
Page 646 Steps on the camera (2) Select [OK]. The [ ] icon changes to [ Select [Upload to Web service].
Page 647 Select [Auto send]. Once [Enable] is set, images are automatically sent when you turn the camera on. Select [Type to send]. Set to [Stills only] or [Stills+movies]. Restart the camera. The images are now sent automatically. To switch networks, select [Switch network] and follow steps 5–8. To remove the connection, select [Clear camera web link settings] and then [OK].
Page 648 Caution Auto send does not start during interval timer shooting. Transfer stops in the following cases. • [Airplane mode] is set to [On] • Movie recording is started • A USB connection is started • Battery capacity is low • The camera’s power switch is set to < >...
Page 649 Image Transfer to FTP Servers Preparation Connecting to the Access Point Configuring FTP Server Connection Settings FTP Transfer Settings Transferring Multiple Images at Once Adding a Caption Before Transfer Auto Retry If Transfer Fails Viewing Transferred Images Your images can be transferred to an FTP server on the network the camera is connected Preparation A computer running one of the following OSes is required.
Page 650 Connecting to the Access Point Set Wi-Fi settings to [Enable]. See steps 1–2 in Connecting to a Bluetooth-Compatible Smartphone Wi-Fi. Select [ : Wi-Fi/Bluetooth connection]. Select [ Transfer images to FTP server]. Select [Add a device to connect to].
Page 651 Select [Setting method]. Select an option and then [OK] to go to the next screen. Select [Configure online] to configure connection settings and then join the network. Select [Configure offline] to configure FTP server connection settings without connecting. Select [Connect with WPS]. Follow these steps to connect via WPS (PBC mode).
Page 652 Press the WPS button on the access point. For details on where the WPS button is and how long to press it, refer to the access point user manual. Select [OK] to initiate connection with the access point. The following screen is displayed once the camera is connected to the access point.
Page 653 Configuring FTP Server Connection Settings Select an FTP mode. For secure FTP transfer using a root certificate, select [FTPS]. For details on root certificate settings, see Set Root Certif. Select [OK] to go to the next screen. Select [Address setting]. Select [OK] to go to the next screen.
Page 654 Enter the FTP server IP address. Use the virtual keyboard ( ) to enter the IP address. If DNS is used, enter the domain name. To set the entered values and return to the screen for step 2, press the <...
Page 655 Configure proxy server settings. Not displayed if you selected [FTPS] in step 1. Select [OK] to go to the next screen. Configure the login method. Select [OK] to go to the next screen.
Page 656 Specify a target folder. Select [Root folder] to have images saved in the root folder, as specified in FTP server settings. Select [Select folder] to specify a target folder in the root folder. If the folder does not exist, it is created automatically. Select [OK] to go to the next screen.
Page 657 FTP Transfer Settings You can configure settings related to FTP transfer and power saving. Select [ : Wi-Fi settings]. Select [FTP transfer settings].
Page 658 Select an option to configure. Automatic transfer Select [Enable] for automatic image transfer to the FTP server immediately after shooting. You can continue shooting still photos as usual while images are being transferred. Caution Before shooting, make sure a card is in the camera. If you shoot without recording images, they cannot be transferred.
Page 659 Transfer type/size In [JPEG size to trans.], you can specify the size of images to transfer. For example, to transfer smaller JPEGs when the camera is set to record larger JPEGs to one card and smaller JPEGs to the other, set to [SmallerJPEG].
Page 660 Set root certif If you specified [FTPS] FTP mode when configuring connection settings, the root certificate used by the FTPS server must be imported to the camera. Caution Only the root certificate with a file name of “ROOT.CER,” “ROOT.CRT,” or “ROOT.PEM” can be imported to the camera.
Page 661 Transferring Multiple Images at Once Selecting images to transfer Selecting multiple images Transferring RAW+JPEG or RAW+HEIF images After shooting, you can select multiple images and transfer them all at once, or you can transfer unsent images or images that could not be sent previously. You can continue shooting still photos as usual during transfer.
Page 662 Select [FTP transfer]. Select [Sel.Image]. Select the image to transfer. Use the < > dial to select an image to transfer, then press < >. Use the < > dial to add a checkmark [ ] in the upper left of the screen, then press <...
Page 663 Select [FTP transfer]. Select [OK]. The selected images are transferred to the FTP server.
Page 664 Selecting multiple images Multiple images can be transferred at once after you choose a selection method. You can continue shooting still photos as usual while images are being transferred. Access the [Image sel./transfer] screen. Follow steps 1–3 in Selecting Images to Transfer.
Page 665 In a folder • Selecting [Folder images failed transf.] selects all images in the selected folder for which transfer failed. • Selecting [Folder images not transfer'd] selects all unsent images in the selected folder. • Selecting [Clear folder transf. history] clears the transfer history of images in the selected folder.
Page 666 Select [OK]. The selected images are transferred to the FTP server.
Page 667 Transferring RAW+JPEG or RAW+HEIF images For RAW+JPEG or RAW+HEIF images, you can specify which image to transfer. Select [ : Image transfer]. Select the type of images to transfer.
Page 668 RAW+JPEG transfer • Select [RAW+JPEG transfer], then select [JPEG only], [RAW only], or [RAW+JPEG]. RAW+HEIF transfer • Select [RAW+HEIF transfer], then select [HEIF only], [RAW only], or [RAW+HEIF]. Caution Some menu items are not available during image transfer. Note This setting is linked to [RAW+JPEG transfer] and [RAW+HEIF transfer] settings on the [Transfer type/size] screen ( Image transfer in progress is paused if you switch to movie mode.
Page 669 Adding a Caption Before Transfer You can add a registered caption to each image before transfer. This is convenient if you want to inform the recipient of the printing quantity, for example. Captions are also added to images saved to the camera. You can check captions added to images by examining the Exif information, in the user comments.
Page 670 Specify the caption. Select [Caption], and on the screen displayed, select the content of the caption. Select [Transfer]. The image is transferred with the caption. After transfer, display returns to the [Image transfer] screen. Caution Other images cannot be selected from the [Transfer with caption] screen. To select another image for transfer with a caption, view that image before following these steps.
Page 671 Auto Retry If Transfer Fails If transfer fails, the camera’s access lamp blinks in red. In this case, the following screen is displayed after you press the < > button and select [ : Wi-Fi/Bluetooth connection]. To resolve the error displayed, see the troubleshooting information ( Once you have resolved the issue, the images that could not be sent initially will be transferred automatically.
Page 672 Viewing Transferred Images Images transferred to the FTP server are stored in the following folder as specified in the FTP server settings. Target folder of the FTP server Under the default settings of the FTP server, images are stored in [C drive] → [Inetpub] folder →...
Page 673 Wi-Fi Connection via Access Points Camera Access Point Mode Manual IP Address Setup This section describes how to join a Wi-Fi network via an access point compatible with WPS (PBC mode). First, check the position of the WPS button and how long to press it. It may take approx. 1 min.
Page 674 Select [Add a device to connect to]. The following message is displayed if you have selected [ Connect to smartphone]. If Camera Connect is already installed, select [Do not display]. On the [Connect to smartphone] screen displayed next, select [Connect via Wi-Fi]. Select [Switch network].
Page 675 Select [Connect with WPS]. Note For [Camera access point mode] displayed in step 6, see Camera Access Point Mode. Select [WPS (PBC mode)]. Select [OK].
Page 676 Connect to the access point via Wi-Fi. Press the access point’s WPS button. Select [OK]. Select [Auto setting]. Select [OK] to access the setting screen for the Wi-Fi function. If an error occurs with [Auto setting], see Manual IP Address Setup.
Page 677 Go to step 7 or 8 in Operating the Camera Using EOS Utility. Transfer images to FTP server] Go to step 10 in Connection via Access Points. Upload to Web service] Go to step 5 in Registering Image.Canon and Setting Up Auto Send.
Page 678 Camera Access Point Mode Camera access point mode is a connection mode for connecting the camera directly to each device via Wi-Fi. Displayed when [ ], [ ], or [ ] is selected after [ : Wi-Fi/Bluetooth connection]. Easy connection Use the other device to establish a Wi-Fi connection with the SSID shown on the camera screen.
Page 679 Manual IP Address Setup The options displayed vary depending on the Wi-Fi function. Select [Manual setting]. Select [OK]. Select an option. Select an option to access the screen for numerical input. To use a gateway, select [Enable], then select [Address].
Page 680 Enter the number. Turn the < > dial to move the input position in the upper area, and use the < > < > dials or < > to select numbers to enter. Press < > to enter the selected number. To set the entered numbers and return to the screen for step 2, press the <...
Page 681 Connecting to a Wireless Remote Control Canceling the Pairing This camera can also be connected to Wireless Remote Control BR-E1 (sold separately, via Bluetooth for remote control shooting. Set Wi-Fi settings to [Enable]. See steps 1–4 in Connecting to a Bluetooth-Compatible Smartphone Wi-Fi.
Page 682 Select [Add a device to connect to]. Press < >. Pair the devices. When the [Pairing] screen appears, press and hold the <W> and <T> buttons on the BR-E1 simultaneously for at least 3 sec. After a message confirms that the camera is paired with the BR-E1, press <...
Page 683 Set up the camera for remote shooting. When shooting still photos, select [ ] or [ ] as the drive mode ( For movie recording, set [ : Remote control] to [Enable]. For instructions after the pairing is complete, refer to the BR-E1’s Instruction Manual.
Page 684 Canceling the Pairing Before pairing with a different BR-E1, clear the information about the connected remote control. Select [ : Wi-Fi/Bluetooth connection]. Select [ Connect to Wireless Remote]. Select [Delete connection information].
Page 685 Select [OK].
Page 686 Reconnecting via Wi-Fi Follow these steps to reconnect via Wi-Fi using registered connection settings. Select [ : Wi-Fi/Bluetooth connection]. Select an option. Select an option to connect to via Wi-Fi from the displayed history. If the option is not displayed, use the < >...
Page 687 Operate the connected device. [ ] Smartphone Start Camera Connect. If the smartphone’s connection destination has been changed, restore the setting to connect via Wi-Fi to the camera or the same access point as the camera. When directly connecting the camera to a smartphone via Wi-Fi, “_Canon0A”...
Page 688 Registering Multiple Connection Settings You can register up to 10 connection settings for the wireless communication functions. Select [ : Wi-Fi/Bluetooth connection]. Select an option. If the history ( ) is displayed, switch screens with the < > < > dial or <...
Page 689 Note To delete connection settings, see Changing or Deleting Connection Settings.
Page 690 Airplane Mode You can temporarily disable Wi-Fi and Bluetooth functions. Select [ : Airplane mode]. Set to [On]. ] is displayed on the screen. Note ] may not be displayed in still photo shooting, movie recording, or playback, depending on display settings. If it is not displayed, press the < >...
Page 691 Wi-Fi Settings Select [ : Wi-Fi settings]. Select an option. Wi-Fi When the use of electronic devices and wireless devices is prohibited, such as on board airplanes or in hospitals, set it to [Disable]. Connection history You can set the connection history for devices connected via Wi-Fi to [Show] or [Do not display].
Page 692 Bluetooth Settings Select [ : Bluetooth settings]. Select an option. Bluetooth If you will not use the Bluetooth function, select [Disable]. Check connection information You can check the name and communication status of the paired device. Bluetooth address You can check the camera’s Bluetooth address.
Page 693 Nickname You can change the camera nickname (displayed on smartphones and other cameras) as needed. Select [ : Nickname]. Enter text using the Virtual Keyboard Operations. When you finish entering characters, press the < > button.
Page 694 GPS Device Settings GP-E2 Smartphone GPS Connection Display You can geotag images with GPS Receiver GP-E2 (sold separately) or a Bluetooth- compatible smartphone. GP-E2 Attach GP-E2 to the camera. Attach GP-E2 to the camera’s hot shoe and turn it on. For details, refer to the GP-E2 Instruction Manual.
Page 695 Update the GP-E2 firmware to Ver. 2.0.0 or later. Firmware updating requires an interface cable. For updating instructions, visit the Canon website. GP-E2 cannot be connected to the camera with a cable. The camera does not record the shooting direction.
Page 696 Smartphone Complete these settings after installing the dedicated Camera Connect app ( ) on the smartphone. On the smartphone, activate location services. Establish a Bluetooth connection. Start Camera Connect and pair the camera and smartphone via Bluetooth. Select [ : GPS device settings]. In [Select GPS device], select [Smartphone].
Page 697 GPS Connection Display You can check the status of smartphone location information acquisition in the GPS connection icon on the screens for still photo shooting or movie recording ( respectively). Gray: Location services are off Blinking: Location information cannot be acquired On: Location information acquired For details on how GPS connection status is indicated when GP-E2 is used, refer to the GP-E2 Instruction Manual.
Page 698 Caution The smartphone can acquire location information only while it is paired with the camera via Bluetooth. Direction information is not acquired. Acquired location information may not be accurate, depending on traveling conditions or smartphone status. It may take some time to acquire location information from the smartphone after you turn the camera on.
Page 699 Changing or Deleting Connection Settings To change or delete the connection settings, terminate the Wi-Fi connection first. Select [ : Wi-Fi/Bluetooth connection]. Select an option. If the history ( ) is displayed, switch screens with the < > < > dial or <...
Page 700 Select [Edit/delete device]. You can change the Bluetooth connection by selecting a smartphone labeled with [ ] in gray. After the [Connect to smartphone] screen is displayed, select [Pair via Bluetooth], then press < > on the next screen. Select the device for which to change or delete the connection settings.
Page 701 Viewable imgs ( Displayed when [ Connect to smartphone] is selected. Settings will appear at the bottom of the screen. Delete connection information When deleting connection information for a paired smartphone, also delete the camera information registered on the smartphone (...
Page 702 Resetting Communication Settings All wireless communication settings can be deleted. By deleting the wireless communication settings, you can prevent their information from being exposed when you lend or give your camera to other people. Select [ : Reset communication settings]. Select [OK].
Page 703 View Info Screen You can check error details and the camera’s MAC address. Select [ : Wi-Fi/Bluetooth connection]. Press the < > button. The [View info] screen will appear. When an error has occurred, press < > to display the error content.
Page 704 Virtual Keyboard Operations Input area, for entering text Cursor keys, for moving in the input area Current no. of characters/no. available Keyboard Switch input modes Space Delete a character in the input area Exit input Use the < > dial to move within (1). Use <...
Page 705 Responding to Error Messages When an error occurs, display the details of the error by following one of the procedures below. Then, eliminate the cause of the error by referring to the examples shown in this chapter. On the [View info] screen, press < >.
Page 706 11: Connection target not found In the case of [ ], is Camera Connect running? • Establish a connection using Camera Connect ( In the case of [ ], is EOS Utility running? • Start EOS Utility and try to connect again ( Are the camera and the access point set to use the same encryption key for authentication? •...
Page 707 21: No address assigned by DHCP server What to check on the camera On the camera, IP address is set to [Auto setting]. Is this the correct setting? • If no DHCP server is used, specify the settings after setting the IP address to [Manual setting] on the camera ( What to check on the DHCP server Is the power of the DHCP server on?
Page 708 22: No response from DNS server What to check on the camera On the camera, the DNS address is set to [Manual setting]. Is this the correct setting? • If no DNS server is used, set the camera’s DNS address setting to [Disable] ( On the camera, does the DNS server’s IP address setting match the server’s actual address? •...
Page 709 23: Device with same IP address exists on selected network Is another device on the camera network using the same IP address as the camera? • Change the camera’s IP address to avoid using the same address as another device on the network. Otherwise, change the IP address of the device that has a duplicate address.
Page 710 41: Cannot connect to FTP server What to check on the camera The camera’s proxy server setting is [Enable]. Is this the correct setting? • If no proxy server is used, set the camera’s proxy server setting to [Disable] ( Do the camera’s [Address setting] and [Port No.] settings match those of the proxy server? •...
Page 711 On the camera, does the FTP server’s IP address setting (in [Address]) match the server’s actual address? • Configure the IP address on the camera to match the actual FTP server address Is a firewall or other security software enabled? •...
Page 712 43: Cannot connect to FTP server. Error code received from server. What to check on the proxy server Is the proxy server on? • Turn on the proxy server. Is the proxy server working correctly? • Check the proxy server settings to make sure the server is working correctly as a proxy server.
Page 713 45: Cannot login to FTP server. Error code received from server. What to check on the camera On the camera, is the [Login name] set correctly? • Check the login name for accessing the FTP server. Check upper- and lower-case letters, and make sure the correct login name is set on the camera ( On the camera, is the [Login password] set correctly? •...
Page 714 46: For the data session, error code received from FTP server What to check on the FTP server The connection was terminated by the FTP server. • Restart the FTP server. Do the user rights for the FTP server allow reading, writing, and log access? •...
Page 715 61: Selected SSID wireless LAN network not found Are any obstacles blocking the line of sight between the camera and the antenna of the access point? • Move the antenna of the access point to a position clearly visible from the point of view of the camera.
Page 716 64: Cannot connect to wireless LAN terminal Are the camera and the access point set to use the same encryption method? • The camera supports the following encryption methods: WEP, TKIP, and AES ( If filtering by MAC address is active, is the MAC address of the camera in use registered at the access point? •...
Page 717 125: Check the network settings Is the network connected? • Check the connection status of the network. 126: Could not connect to server image.canon is under maintenance or temporarily busy. • Try accessing the service again later.
Page 718 127: An error has occurred A problem other than error code number 121 to 126 occurred while the camera is connected to the Web service. • Try again to establish the Wi-Fi connection to image.canon. 151: Transmission canceled Automatic image transfer was somehow interrupted.
Page 719 Wireless Communication Function Precautions If the transmission rate drops, the connection is lost, or other problems occur when using the wireless communication functions, try the following corrective actions. Distance between the camera and the smartphone If the camera is too far from the smartphone, a Wi-Fi connection may not be established even when Bluetooth connection is possible.
Page 720 Security If security settings have not been properly set, the following problems may occur. Transmission monitoring Third parties with malicious intent may monitor wireless LAN transmissions and attempt to acquire the data you are sending. Unauthorized network access Third parties with malicious intent may gain unauthorized access to the network you are using to steal, modify, or destroy information.
Page 721 Checking Network Settings Windows Open the Windows [Command Prompt], then enter ipconfig/all and press the <Enter> key. In addition to the IP address assigned to the computer, the subnet mask, gateway, and DNS server information are also displayed. macOS In macOS, open the [Terminal] application, enter ifconfig -a, and press the <Return> key. The IP address assigned to the computer is indicated in the [enX] item (X: number) next to [inet], in the format “***.***.***.***”.
Page 722 Wireless Communication Status Wireless communication status can be checked on the screen. Quick Control screen Information display screen during playback (1) Wi-Fi function (2) Bluetooth function (3) Wireless signal strength Screen Communication Status Wi-Fi Function Wireless Signal Strength Wi-Fi: Disable Not connected Wi-Fi: Enable Connecting...
Page 723 Bluetooth Function Indicator Bluetooth Function Connection Status Screen Bluetooth connected Other than [Disable] Bluetooth not connected [Disable] Bluetooth not connected Not displayed...
Page 724 Set-up This chapter describes menu settings on the set-up ([ ]) tab. to the right of titles indicates functions only available in [ ], [ ], [ ], [ ], [ ], or ] mode. • Tab Menus: Set-up • Selecting Cards for Recording/Playback •...
Page 725 Tab Menus: Set-up Set-up 1 (1) Record func+card/folder sel. • Selecting Cards for Recording/Playback • Creating a Folder File numbering File name Format card Auto rotate rotate info Date/Time/Zone...
Page 726 Set-up 2 Language Video system Help text size Beep Headphone volume Power saving Eco mode Set-up 3 Screen/viewfinder display Screen brightness Viewfinder brightness Screen/viewfinder color tone Fine-tune VF color tone UI magnification...
Page 727 Set-up 4 HDMI resolution Touch control Multi function lock Shutter at shutdown Sensor cleaning Set-up 5 Reset camera Custom shooting mode (C1-C3) Battery info. Copyright information Manual/software URL Certification Logo Display Firmware...
Page 728 In [ ] and [ ] mode, the following screen is displayed for [ 5]. Battery info. Manual/software URL...
Page 729 Selecting Cards for Recording/Playback Recording Method with Two Cards Inserted Recording/Playback Selection with Two Cards Inserted Recording is possible when card [ ] or [ ] is in the camera (except under some conditions). With only one card inserted, there is no need to follow these steps. With two cards inserted, you can select the recording method and card to use for recording and playback as follows.
Page 730 Set the recording method. separate • Select [Enable] for automatic configuration of the recording method for still photos and movies. Movies are recorded to card [ ] and still photos to card [ • Movie recording is not possible if card [ ] is full or not inserted. •...
Page 731 Rec options Set the recording method for still photos. • Standard Records still photos to the card selected in [ Record/play]. • Auto switch card Same as [Standard], but shooting ends when the card becomes full. When you resume shooting, the camera switches to the other card automatically.
Page 732 Note Rec. separately/Rec. to multiple Images are recorded with the same file number to card The number of shots available as shown in the viewfinder and on the Quick Control screen is for the card with less free space. [Card* full] is displayed when one of the cards becomes full, and shooting is no longer possible.
Page 733 Rec options Set the recording method for movies. • Standard Records movies to the card selected in [ Record/play]. • Auto switch card Same as [Standard], but recording ends when the card becomes full. When you resume recording, the camera switches to the other card for recording.
Page 734 Recording/Playback Selection with Two Cards Inserted With [ Rec options]/[ Rec options] set to [Standard] or [Auto switch card], select the card for recording and playback. With [ Rec options] set to [Rec. separately] or [Rec. to multiple], or with [ options] set to [ ], select the card for playback.
Page 735 Note With [Priority: ] set, the camera switches to the priority card when cards are inserted or removed.
Page 736 Folder Settings Creating a Folder Renaming Folders Selecting a Folder You can freely create and select the folder where the captured images are to be saved. You can also rename folders. Creating a Folder Select [ : Record func+card/folder sel.]. Select [Folder].
Page 737 Select [Create folder]. Select [OK]. To rename the folder, select [Change folder name].
Page 738 Renaming Folders Enter letters and numbers of your choice. You can enter five characters. By selecting [ ], you can change the input mode. To delete single characters, select [ ] or press the < > button. Use the < >...
Page 739 Selecting a Folder (1) Number of images in folder (2) Lowest file number (3) Folder name (4) Highest file number Select a folder on the folder selection screen. Captured images are stored in your selected folder. Note Folders Folders are named as in “100EOSR5,” with a three-digit folder number followed by five letters or numbers.
Page 740 File Numbering Continuous Auto Reset Manual Reset The captured images saved in a folder are assigned a file number from 0001 to 9999. You can change how the image files are numbered. (Example) (1) File number Select [ : File numbering].
Page 741 Set the item. Select [Numbering]. Select [Continuous] or [Auto reset]. If you want to reset the file numbering, select [Manual reset] ( Select [OK] to create a new folder, and the file number will start with 0001. Caution If the file number in folder 999 reaches 9999, shooting will not be possible even if the card still has free space.
Page 742 Continuous For continuous file numbering regardless of switching cards or creating folders File numbering is continuous up to 9999, even if you replace a card, create a folder, or switch the target card (as in → ). This is useful when you want to save images numbered anywhere between 0001 to 9999 on multiple cards or in multiple folders into one folder on a computer.
Page 743 Auto Reset For restarting file numbering from 0001 after switching cards or creating folders File numbering is reset to 0001 if you replace a card, create a folder, or switch the target card (as in → ). This is useful if you want to organize images by cards or folders. Note that file numbering may continue from any existing images in cards or folders that you switch to.
Page 744 Manual Reset For resetting file numbering to 0001 or starting from 0001 in new folders When you reset the file numbering manually, a new folder is created automatically and the file numbering of images saved to that folder starts from 0001. This is useful, for example, if you want to use different folders for the images taken yesterday and the ones taken today.
Page 745 File Naming File names consist of four alphanumeric characters followed by a four-digit file number ( and file extension. You can change the first four alphanumeric characters, which by default are unique for each camera and set when the camera is shipped. User setting 1 enables you to register four characters of your choice.
Page 746 Enter letters and numbers of your choice. Enter four characters for User setting 1 or three for User setting 2. By selecting [ ], you can change the input mode. To delete single characters, select [ ] or press the < >...
Page 747 Select a registered file name. Select [File name], then choose a registered file name. Caution An underscore (“_”) cannot be used as the first character. Note User setting 2 Shooting after you have selected “*** + image size” (as registered to User setting 2) will add a character representing the current image size to your file name as the fourth character.
Page 748 Formatting If the card is new or was previously formatted (initialized) by another camera or computer, format the card with this camera. Caution When the card is formatted, all images and data on the card will be erased. Even protected images will be erased, so make sure there is nothing you need to keep.
Page 749 Format the card. Select [OK]. For low-level formatting, press the < > button to add a checkmark [ ] to [Low level format], then select [OK].
Page 750 Conditions requiring card formatting The card is new. The card was formatted by a different camera or a computer. The card is full of images or data. A card-related error is displayed ( Low-level formatting Perform low-level formatting if the card’s writing or reading speed seems slow or if you want to totally erase the data on the card.
Page 751 Auto Rotate You can change the auto rotation setting that straightens images shot in vertical orientation when they are displayed. Select [ : Auto rotate].
Page 752 Select an option. Automatically rotates images for display on both the camera and computers. Automatically rotates images only for display on computers. Images are not automatically rotated. Caution Images captured with auto rotation set to [Off] will not rotate during playback even if you later set auto rotation to [On].
Page 753 Adding Orientation Information to Movies For movies recorded with the camera held vertically, orientation information indicating which side is up can be added automatically to enable playback in the same orientation on smartphones or other devices. Select [ : Add rotate info].
Page 754 Caution [Add rotate info] is not available for RAW or MP4 files when the movie recording format is Movies are played horizontally on the camera and via HDMI video output, regardless of this setting.
Page 755 Date/Time/Zone When you turn on the power for the first time or if the date/time/zone have been reset, follow these steps to set the time zone first. By setting the time zone first, you can simply adjust this setting as needed in the future and the date/time will be updated to match it.
Page 756 Turn the < > dial to select the time zone, then press < >. If your time zone is not listed, press the < > button, then set the difference from UTC in [Time difference]. Turn the < > dial to select a [Time difference] item (+/–/hour/ minute), then press <...
Page 757 Set daylight saving time. Set it as necessary. Turn the < > dial to select [ ], then press < >. Turn the < > dial to select [ ], then press < >. When the daylight saving time is set to [ ], the time set in step 3 will advance by 1 hour.
Page 758 Note Auto power off time may be extended while the [ : Date/Time/Zone] screen is displayed.
Page 759 Language Select [ : Language Set the desired language.
Page 760 Video System Set the video system of any television used for display. This setting determines the frame rates available when you record movies. Select [ : Video system]. Select an option. For NTSC For areas where the TV system is NTSC (North America, Japan, South Korea, Mexico, etc.).
Page 761 Help Changing the Help Text Size When [ Help] is displayed, you can display a description of the feature by pressing the < > button. Press it again to exit Help display. To scroll the screen when a scrollbar (1) appears on the right, turn the <...
Page 762 Example: [ : Multi function lock] < >...
Page 763 Changing the Help Text Size Select [ : Help text size]. Select an option.
Page 764 Beeps Select [ : Beep]. Select an option. Enable The camera beeps after focusing and in response to touch operations. Touch Disables beeping for touch operations. Disable Disables beeping for focus confirmation, self-timer shooting, and touch operations.
Page 765 Headphone Volume Select [ : Headphone volume]. Adjust the volume. Turn the < > dial to adjust the volume, then press < >. Note You can check sound from the built-in microphone or an external microphone on headphones when [ : Sound recording] is set to an option other than [Disable] and [High Frame Rate] is set to [Disable].
Page 766 Power Saving You can adjust the timing of when the screen, camera, and viewfinder turn off automatically after the camera is left idle (Display off, Auto power off, and Viewfinder off). Select [ : Power saving]. Select an option. Note Even when [Auto power off] is set to [Disable], the screen will turn off after the time set in [Display off].
Page 767 Eco Mode Enables you to conserve battery power in shooting mode. When the camera is not in use, the screen darkens to reduce battery consumption. Select [ : Eco mode]. Select [On]. The screen darkens when the camera is not used for approx. two seconds.
Page 768 Screen/Viewfinder Display You can specify to use the screen or viewfinder for display, to avoid accidentally activating the eye sensor when the screen is open. Select [ : Screen/viewfinder display]. Select an option. AUTO1: Auto 1 ( : only screen) Always use the screen for display when it is swung out.
Page 769 Note You can also switch between viewfinder and screen display by pressing a button you have customized by assigning to switching. With this setting set to [AUTO1] or [AUTO2], the camera responds to the eye sensor accordingly. With [AUTO1] set, the camera responds to the eye sensor when the screen is closed and facing you but does not respond when it is swung out.
Page 770 Screen Brightness Select [ : Screen brightness]. Make the adjustment. Referring to the gray image, turn the < > dial to adjust brightness, then press < >. Check the effect on the screen. Note To check the image’s exposure, referring to the histogram is recommended (...
Page 771 Viewfinder Brightness Select [ : Viewfinder brightness]. Make the adjustment. Referring to the gray image, turn the < > dial to adjust brightness, then press < >. Check the effect in the viewfinder.
Page 772 Screen and Viewfinder Color Tone Select [ : Screen/viewfinder color tone]. Make the adjustment. Turn the < > dial to select an option, then press < >.
Page 773 Fine-Tuning Viewfinder Color Tone Select [ : Fine-tune VF color tone]. Make the adjustment. Referring to the gray image, use < > for adjustment, then press < >. Check the effect in the viewfinder.
Page 774 UI Magnification You can magnify menu screens by double-tapping with two fingers. Double-tap again to restore the original display size. Select [ : UI magnification]. Select [Enable]. Caution Use camera controls when configuring menu functions with the display magnified. Touch-screen operations are not supported.
Page 775 HDMI Resolution Set the image output resolution used when the camera is connected to a television or external recording device with an HDMI cable. Select [ : HDMI resolution]. Select an option. Auto The images will automatically be displayed at the optimum resolution matching the connected television.
Page 776 Touch Control Select [ : Touch control]. Select an option. [Sensitive] makes the touch-screen panel more responsive than [Standard]. To disable touch operations, select [Disable]. Caution Precautions for touch-screen panel operations Do not use sharp objects such as fingernails or ballpoint pens for touch operations. Do not use wet fingers for touch operations.
Page 777 Multi-Function Lock Specify camera controls to lock when the Multi-function lock is enabled. This can help prevent accidentally changing settings. Select [ : Multi function lock]. Select camera controls to lock. Press < > to add a checkmark [ ]. Select [OK].
Page 778 Shutter at Shutdown You can set whether to leave the shutter open or close it when the camera’s power switch is set to < >. Select [ : Shutter at shutdown]. Select an option. : Closed Closes the shutter. Normally set to closed, to prevent dust from adhering to the sensor when you switch lenses.
Page 779 Sensor Cleaning Cleaning Now Cleaning Automatically Cleaning Manually The camera’s sensor cleaning feature cleans the front of the image sensor. Note For best results, clean with the camera in a stable position on a desk or other flat surface. Cleaning Now Select [ : Sensor cleaning].
Page 780 Select [Clean now Select [OK] on the confirmation screen. Note Even if you repeat the sensor cleaning, the result will not improve much. Note that [Clean now ] may not be available immediately after cleaning.
Page 781 Cleaning Automatically Select [Auto cleaning Select an option. Turn the < > dial to select an option, then press < >.
Page 782 Always use a fully charged battery. The image sensor is extremely delicate. If the sensor needs to be cleaned directly, having it done by a Canon Service Center is recommended. Select [Clean manually]. Select [OK].
Page 783 If the battery level becomes low while cleaning the sensor, the beeper will sound as a warning. Stop cleaning the sensor. If a smudge that cannot be removed with a blower remains, having the sensor cleaned by a Canon Service Center is recommended.
Page 784 Resetting the Camera The camera’s settings for shooting functions and menu functions can be restored to their defaults. Select [ : Reset camera]. Select an option. Basic settings Restores default settings for camera shooting functions and menu settings. Other settings Settings for individual selected items can be reset.
Page 785 Note Still photo Custom shooting modes are reset when [Custom shooting mode (C1- C3)] in [Other settings] is selected in still photo shooting mode, and movie Custom shooting modes are reset when this option is selected in movie recording mode.
Page 786 Custom Shooting Mode (C1–C3) Automatic Update of Registered Settings Canceling Registered Custom Shooting Modes Current camera settings such as shooting, menu, and Custom Function settings can be registered in Custom shooting modes [ ] to [ ]. You can register different functions to use when shooting still photos or movies.
Page 787 Register the desired items. Select the Custom shooting mode to register, then select [OK] on the [Register settings] screen. The current camera settings are registered to Custom shooting mode Automatic Update of Registered Settings If you change a setting while shooting in Custom shooting mode, the mode can be automatically updated with the new setting (Auto update).
Page 788 Canceling Registered Custom Shooting Modes If you select [Clear settings] in step 2, the settings of each mode can be restored to default settings, as they were before registration. Note You can also change shooting and menu settings in Custom shooting modes.
Page 789 Battery Information Registering Batteries to the Camera Labeling Batteries with Serial Numbers Checking the Remaining Capacity of a Registered Battery Not in Use Deleting the Registered Battery Information You can check the conditions of the battery you are using. By registering multiple batteries to the camera, you can check their approximate remaining capacity and usage history.
Page 790 Caution Using a genuine Canon Battery Pack LP-E6NH/LP-E6N is recommended. If you use batteries that are not genuine Canon products, the camera’s full performance may not be attained or malfunction may result. Note The shutter count is the number of still photos taken (not including movie recording).
Page 791 Registering Batteries to the Camera You can register up to six LP-E6NH/LP-E6N/LP-E6 battery packs to the camera. To register multiple batteries to the camera, follow the procedure below for each battery. Press the < > button. With the battery info. screen displayed, press the < >...
Page 792 Select [OK]. The battery is now displayed in white. Note The battery cannot be registered if the household power outlet accessories (sold separately, ) are used.
Page 793 Labeling Batteries with Serial Numbers It is convenient to label registered LP-E6NH/LP-E6N/LP-E6 battery packs with their serial numbers, using commercially available labels. On a label approx. 25×15 mm, write the serial number (1). Apply the label. Set the power switch to < >.
Page 794 Caution Do not apply the label on any part other than as shown in the illustration in step 2. Otherwise, the misplaced label may make it difficult to insert the battery or impossible to turn on the power. When you use Battery Grip BG-R10 (sold separately), the label may peel off after repeated insertion and removal from the battery magazine.
Page 795 Checking the Remaining Capacity of a Registered Battery Not in Use You can check the remaining capacity of batteries not currently in use, as well as their last date of use. Find the matching serial number. On the battery history screen, find the battery serial number (1) matching the serial number that the battery is labeled with.
Page 796 Deleting the Registered Battery Information Select [Delete info.]. Registering Batteries to the Camera, select [Delete info.] in step 2. Select the battery information to delete. [ ] is displayed. Press the < > button. Select [OK] on the confirmation screen.
Page 797 Copyright Information Checking the Copyright Information Deleting the Copyright Information When you set the copyright information, it will be recorded to the image as Exif information. Caution If the entry for “Author” or “Copyright” is long, it may not be displayed entirely when you select [Display copyright info.].
Page 798 Enter text. Use the < > dial or < > to select a character, then press < > to enter it. By selecting [ ], you can change the input mode. To delete single characters, select [ ] or press the < >...
Page 799 Deleting the Copyright Information When you select [Delete copyright information] in step 2, you can delete the [Author] and [Copyright] information.
Page 800 Other Information Manual/software URL To download instruction manuals, select [ : Manual/software URL] and scan the displayed QR code with a smartphone. You can also use a computer to access the website at the URL displayed and download software. Certification Logo Display Select [ : Certification Logo Display] to display some of the logos of the camera’s certifications.
Page 801 Custom Functions/My Menu You can fine-tune camera functions and change the functionality of buttons and dials to suit your shooting preferences. You can also add menu items and Custom Functions that you adjust frequently to My Menu tabs. • Tab Menus: Customization •...
Page 802 Tab Menus: Customization Custom Functions 1 Exposure level increments ISO speed setting increments Speed from metering/ISO Auto Bracketing auto cancel Bracketing sequence Number of bracketed shots Safety shift Custom Functions 2 Same expo. for new aperture AE lock meter. mode after focus Restrict shooting modes Set shutter speed range Set aperture range...
Page 803 Custom Functions 3 Dial direction during Tv/Av Control ring rotation Customize buttons Customize dials Clear customized settings Custom Functions 4 Add cropping information Audio compression Default Erase option Release shutter w/o lens Retract lens on power off Add IPTC information...
Page 804 Custom Functions 5 Clear all Custom Func. (C.Fn) Selecting [ : Clear all Custom Func. (C.Fn)] clears all Custom Function settings.
Page 805 Custom Function Setting Items C.Fn1 C.Fn2 C.Fn3 C.Fn4 C.Fn5 You can customize camera features on the [ ] tab to suit your shooting preferences. Any settings you change from default values are displayed in blue.
Page 806 C.Fn1 Exposure level increments You can specify to use 1/2-stop increments as the increments for shutter speed, aperture value, exposure compensation, AEB, flash exposure compensation, and FEB. 1/3: 1/3-stop 1/2: 1/2-stop Note Display when set to [1/2-stop] is as follows. ISO speed setting increments You can change the manual ISO speed setting increment to a whole stop.
Page 807 Speed from metering/ISO Auto You can set the ISO speed status after the metering timer ends in cases where, for ISO Auto operation in [ ]/[ ]/[ ] mode, the camera has adjusted the ISO speed during metering or during the metering timer. : Restore Auto after metering : Retain speed after metering Bracketing auto cancel...
Page 808 Number of bracketed shots The number of shots taken with AEB and white balance bracketing can be changed. When [Bracketing sequence] is set to [0, -, +], the bracketed shots will be taken as shown in the following table. 3: 3 shots 2: 2 shots 5: 5 shots 7: 7 shots...
Page 809 Safety shift If the subject brightness changes and the standard exposure cannot be obtained within the autoexposure range, the camera will automatically change the manually selected setting to obtain the standard exposure. [Shutter speed/Aperture] applies to [ ] or [ ] mode.
Page 810 C.Fn2 Same expo. for new aperture The maximum aperture value may decrease (the lowest f/number may increase) in [ mode (manual exposure shooting) with ISO speed set manually (except when set to ISO Auto) if you (1) Change lenses, (2) Attach an extender, or (3) Use a zoom lens with a variable maximum aperture value.
Page 811 AE lock meter. mode after focus For each metering mode, you can specify whether to lock the exposure (AE lock) once subjects are in focus with One-Shot AF. The exposure will be locked while you keep pressing the shutter button halfway. Select metering modes for AE lock and add a checkmark [ ].
Page 812 Select a shooting mode. Turn the < > dial to select shooting modes, then press < > to add a checkmark [ ]. Caution Restricted shooting mode settings are not registered to [ ], [ ], or [ ] is not available with [ : Restrict shooting modes] set to [Enable].
Page 813 Min. aperture Can be set in a range of f/91–f/1.4. Note The available aperture value range varies depending on the lens’s minimum and maximum aperture value.
Page 814 C.Fn3 Dial direction during Tv/Av Dial turning direction when setting the shutter speed and aperture value can be reversed. Reverses the turning direction of the < >, < >, and < > dial in [ ] shooting mode and only the < >...
Page 815 Select a part of the bar. Select a function to assign. Press < > to set it. You can configure advanced settings for functions labeled with ] in the lower left of the screen by pressing the < > button. Note : Customize buttons] settings are not cleared even if you select [ : Clear all...
Page 816 Functions available for customization ●: Default ○: Available for customization Function ● ● 〇〇〇〇 Metering and AF start ● 〇〇〇〇〇〇〇〇 AF stop 〇〇〇〇 ● 〇〇〇〇...
Page 817 〇〇〇〇〇〇〇〇〇〇 Focus guide 〇〇〇〇〇〇〇〇〇〇 Drive mode * 1: Cannot be assigned as a function available in movie recording. Exposure Compensation ●: Default ○: Available for customization Function 〇...
Page 818 Image ●: Default ○: Available for customization Function 〇〇〇〇〇〇〇〇〇〇 Image quality 〇〇〇〇〇〇〇〇〇〇 One-touch image quality setting 〇〇〇〇〇〇〇...
Page 819 Movies ●: Default ○: Available for customization Function 〇〇〇〇〇〇〇〇〇 Zebra pattern ● 〇〇〇〇〇〇〇 Movie recording 〇〇〇〇〇〇〇〇〇 Pause Movie Servo AF * 2: Cannot be assigned as a function available in still photo shooting.
Page 820 〇 Switch to Custom shooting mode 〇 Still ←→ movie switching 〇〇〇〇〇 ● 〇〇〇〇 Depth-of-field preview 〇〇〇〇〇〇〇〇〇〇 Reset selected item in Fv mode Reset Tv/Av/ 〇...
Page 821 〇〇〇〇〇〇〇〇〇〇 Switch between VF/screen 〇〇〇〇〇〇〇〇〇〇 Eco mode 〇〇〇〇〇〇〇〇〇〇 Wi-Fi function 〇〇〇〇...
Page 822 Customize dials Frequently used functions can be assigned to the < >/< >/< >/< > dials. Select [ : Customize dials]. Select a part of the bar. Select a function to assign. Press < > to set it. You can configure advanced settings for functions labeled with ] in the lower left of the screen by pressing the <...
Page 823 Note : Customize dials] settings are not cleared even if you select [ : Clear all Custom Func. (C.Fn)]. To clear the settings, select [ : Clear customized settings].
Page 824 Functions available for dials ●: Default ○: Available for customization Function Select AF method ○ ○ ○ Direct AF point selection ○ ○ AF method (hold meter. btn) ○ Change shutter speed ○ Change aperture value ○ Exposure compensation ○ ○...
Page 825 Note < > and < > dials cannot be customized in [ ] mode. < >: Control ring on RF lenses and mount adapters.
Page 826 Clear customized settings Select [ : Clear customized settings]. Select [OK]. [Customize buttons] and [Customize dials] are restored to defaults.
Page 827 C.Fn4 Add cropping information Adding cropping information displays vertical lines for the aspect ratio specified in shooting, so that you can compose shots as if shooting with a medium- or large-format camera (6×6 cm, 4×5 inch, and so on). When you shoot, instead of cropping images recorded to the card, the camera adds aspect ratio information to images for cropping in the Digital Photo Professional (EOS software).
Page 828 Audio compression Sets audio compression for movie recording. [Disable] allows higher audio quality than when audio is compressed, but file sizes are larger. ON: Enable OFF: Disable Caution Editing movie files recorded with [Disable] and then saving them with compression will also compress the audio.
Page 829 Retract lens on power off You can set whether to retract gear-type STM lenses (such as EF40mm f/2.8 STM) automatically when the camera’s power switch is set to < >. ON: Enable OFF: Disable Caution With auto power off, the lens will not retract regardless of the setting. Before detaching the lens, make sure that it is retracted.
Page 830 Add IPTC information Registering IPTC (International Press Telecommunications Council) information to the camera from EOS Utility (EOS software) enables you to record (add) this information to JPEG/HEIF/RAW still photos at the time of shooting. This is helpful in file management and other tasks using the IPTC information.
Page 831 C.Fn5 Clear all Custom Func. (C.Fn) Selecting [ : Clear all Custom Func. (C.Fn)] clears all Custom Function settings except [Customize buttons] and [Customize dials]. Note Performing [ : Clear all Custom Func. (C.Fn)] does not clear settings configured in [ : Customize buttons] and [ : Customize dials].
Page 832 Tab Menus: My Menu Add My Menu tab Delete all My Menu tabs Delete all items Menu display...
Page 833 Registering My Menu Creating and Adding My Menu Tabs Registering Menu Items on My Menu Tabs My Menu Tab Settings Deleting All My Menu Tabs/Deleting All Items Menu Display Settings On the My Menu tab, you can register menu items and Custom Functions you often adjust.
Page 834 Creating and Adding My Menu Tabs Select [Add My Menu tab]. Select [OK]. You can create up to five My Menu tabs by repeating steps 1 and 2.
Page 835 Registering Menu Items on My Menu Tabs Select [MY MENU*: Configure]. Select [Select items to register]. Register the desired items. Select an item, then press < >. Select [OK] on the confirmation screen. You can register up to six items. To return to the screen in step 2, press the <...
Page 836 My Menu Tab Settings You can sort and delete items on the menu tab, and rename or delete the menu tab itself. Sort registered items You can change the order of the registered items in My Menu. Select [Sort registered items], select an item to rearrange, then press <...
Page 837 Rename tab You can rename the My Menu tab from [MY MENU*]. Select [Rename tab]. Enter text. To delete single characters, select [ ] or press the < > button. Use the < > or < > dial or < >...
Page 838 Deleting All My Menu Tabs/Deleting All Items You can delete all the created My Menu tabs or My Menu items registered on them. Delete all My Menu tabs You can delete all My Menu tabs you created. When you select [Delete all My Menu tabs], all the tabs from [MY MENU1] to [MY MENU5] will be deleted and the [ ] tab will revert to its default.
Page 839 Menu Display Settings You can select [Menu display] to set the menu screen that is to appear first when you press the < > button. Normal display Displays the last displayed menu screen. Display from My Menu tab Displays with the [ ] tab selected.
Page 840 Reference This chapter provides reference information on camera features. • Importing Images to a Computer • Using a USB Power Adapter to Charge/Power the Camera • Using a Battery Grip • Troubleshooting Guide • Error Codes • System Map • ISO Speed in Movie Recording •...
Page 841 Importing Images to a Computer Connecting to a Computer with an Interface Cable Using a Card Reader Connecting to a Computer via Wi-Fi You can use EOS software to import images from the camera to a computer. There are three ways to do this. Connecting to a Computer with an Interface Cable Install EOS Utility ( Connect the camera to the computer.
Page 842 Caution With a Wi-Fi connection established, the camera cannot communicate with the computer even if they are connected with an interface cable.
Page 843 Using a Card Reader You can use a card reader to import images to a computer. Install Digital Photo Professional ( Insert the card into the card reader. Use Digital Photo Professional to import the images. Refer to the Digital Photo Professional Instruction Manual. Note When downloading images from the camera to a computer with a card reader without using EOS software, copy the DCIM folder on the card to the computer.
Page 844 Connecting to a Computer via Wi-Fi You can connect the camera to the computer via Wi-Fi and import images to the computer Note By connecting to an FTP server, you can send images on the camera to a computer (...
Page 845 Using a USB Power Adapter to Charge/Power the Camera Using USB Power Adapter PD-E1 (sold separately), you can charge Battery Pack LP-E6NH or LP-E6N without removing it from the camera. The camera can also be powered. Note that Battery Pack LP-E6 cannot be charged this way. Charging Connect the USB power adapter.
Page 846 Connect the power cord. Connect the power cord to the USB power adapter and plug the other end into a power outlet. Charging begins, and the access lamp (1) is lit in green. ] is displayed on the LCD panel. When charging is finished, the access lamp turns off.
Page 847 If the problem persists, take the camera to the nearest Canon Service Center. The charging time required and the amount charged vary depending on ambient temperature and remaining capacity.
Page 848 Using a Battery Grip Attaching Batteries Using a Household Power Outlet Button and Dial Operations Using a USB Power Adapter to Charge/Power the Camera Equipped with buttons and dials for vertical shooting, Battery Grip BG-R10 is an optional camera accessory that can power the camera with two batteries. Remove the contact covers.
Page 849 Remove the battery compartment cover. Turn off the camera before removing the battery. Remove the battery compartment cover from the camera. Attach the cover to the battery grip. To remove the cover, slide the lever to release it, following the attachment procedure in reverse.
Page 850 Attach and lock the battery grip. Insert the battery grip in the camera and turn the release dial to lock it in place. Remove the battery magazine.
Page 851 Caution When reattaching the battery compartment cover to the camera, attach it opened to at least 90°. Do not touch the camera or battery grip contacts.
Page 852 Attaching Batteries Attach the batteries. Insert the batteries as shown. When only one battery is used, it can be inserted in either position. To secure the batteries, push in the direction of the arrows until they click into place. To remove the batteries, press the battery magazine lever in the direction of the arrow.
Page 853 Attach the battery magazine. Insert the battery magazine all the way in to secure it. Caution When attaching batteries, make sure the electrical contacts are clean. Wipe off any dirt on the contacts with a soft cloth. Attach batteries after attaching the battery grip to the camera. If the battery grip is attached to the camera with batteries already attached, it may prevent correct display of battery check results.
Page 854 Using a Household Power Outlet Attach the DC coupler. Attach DC Coupler DR-E6 (sold separately) the same way as the batteries. Pass the DC coupler cord through the battery magazine cord groove. Insert the battery magazine all the way in to secure it. Attach the battery magazine.
Page 855 Connect the DC coupler to the AC adapter. Fully insert the DC coupler plug into the socket of AC Adapter AC-E6N (sold separately). Connect the power cord. Connect the power cord to the AC adapter and insert the power plug into a power outlet.
Page 856 Button and Dial Operations To use the buttons and dials, turn the vertical-grip on/off switch (4) to ON. The buttons and dials are used the same way as corresponding buttons and dials on the camera. Shutter button < > Multi-function button <...
Page 857 Using a USB Power Adapter to Charge/Power the Camera Using USB Power Adapter PD-E1, you can charge Battery Pack LP-E6NH or LP-E6N without removing it from the battery grip. The camera can also be powered. Caution LP-E6NH and LP-E6N can be charged together. Otherwise, you can charge a single LP-E6NH or LP-E6N battery at a time.
Page 858 Charge the battery. Connect the power cord to the USB power adapter and plug the other end into a power outlet. Charging begins, and the charge lamp lights up. ] is displayed on the LCD panel. When charging is finished, the charge lamp turns off. Supplying power To power the camera without charging batteries, set the camera power switch to <...
Page 859 If the problem persists, take the camera to the nearest Canon Service Center. The charging time required and the amount charged vary depending on ambient temperature and remaining capacity.
Page 860 Sensor cleaning problems Computer connection problems If a problem occurs with the camera, first refer to this Troubleshooting Guide. If this Troubleshooting Guide does not resolve the problem, take the camera to the nearest Canon Service Center. Power-related problems Batteries cannot be charged with the battery charger.
Page 861 In this case, unplug the power cord, reattach the battery, and wait a few minutes before plugging it in again. If the problem persists, take the camera to the nearest Canon Service Center. The access lamp is not lit during charging with the USB power adapter.
Page 862 [Battery communication error. Does this battery/do these batteries display the Canon logo?] is displayed. Do not use any battery packs other than a genuine Canon Battery Pack LP-E6NH/ LP-E6N/LP-E6. Remove and install the battery again ( If the electrical contacts are dirty, use a soft cloth to clean them.
Page 863 Shooting-related problems The lens cannot be attached. To attach EF or EF-S lenses, you will need a mount adapter. The camera cannot be used with EF-M lenses ( No images can be shot or recorded. Make sure the card is properly inserted ( Slide the card’s write-protect switch to the Write/Erase setting ( If the card is full, replace the card or delete unnecessary images to make space Shooting is not possible if the AF point turns orange when you attempt to focus.
Page 864 / Number of possible shots / Maximum burst for continuous shooting is based on the standard Canon test card, and the actual maximum burst is higher for cards with faster writing speeds. For this reason, estimated maximum burst may differ from actual maximum burst.
Page 865 Expanded ISO speeds cannot be selected for still photo shooting. Check the [ISO speed range] setting under [ ISO speed settings]. Expanded ISO speeds are not available when [ : Highlight tone priority] is set to [Enable] or [Enhanced]. Expanded ISO speeds are not available when [HDR shooting ] in [ : HDR PQ settings] is set to [Enable].
Page 866 The flash always fires at full output. Flash units other than EL/EX series Speedlites used in autoflash mode always fire at full output ( When the flash Custom Function setting for [Flash metering mode] is set to [TTL flash metering] (autoflash), the flash will always fire at full output ( Flash exposure compensation cannot be set.
Page 867 ] icon is displayed during movie recording. It indicates that the camera’s internal temperature is high. Movie recording is not possible as long as [ ] is displayed. Display of [ ] during movie recording also indicates that the camera will turn off automatically in approx. 3 min. ( Movie recording stops by itself.
Page 868 The subject looks distorted during movie recording. If you move the camera to the left or right (panning) or shoot a moving subject, the image may look distorted. The problem may be more noticeable in time-lapse movie recording. Sound is not recorded in movies. Sound is not recorded in High Frame Rate movies.
Page 869 Problems with wireless features Cannot pair with a smartphone. Use a smartphone compliant with Bluetooth Specification Version 4.1 or later. Turn on Bluetooth from the smartphone settings screen. Pairing with the camera is not possible from the smartphone’s Bluetooth settings screen. Install the dedicated app Camera Connect (free of charge) on the smartphone ( Pairing with a previously paired smartphone is not possible if pairing information registered for another camera remains on the smartphone.
Page 870 Operation problems Settings change when I switch from still photo shooting to movie recording or vice versa. Separate settings are retained for use when shooting still photos and recording movies. I cannot adjust settings with < >, < >, < >, <...
Page 871 Display problems The menu screen shows fewer tabs and items. In [ ] mode, some tabs and items are not displayed. Tabs and items on the menu screen also vary for still photos and movies. The display starts with [ ] My Menu, or the [ ] tab alone is displayed.
Page 872 The screen does not display a clear image. If the screen is dirty, use a soft cloth to clean it. The screen display may seem slightly slow in low temperatures or may look black in high temperatures, but it will return to normal at room temperature.
Page 873 Playback problems Part of the image blinks in black. : Highlight alert] is set to [Enable] ( A red box is displayed on the image. : AF point disp.] is set to [Enable] ( During image playback, the AF points are not displayed. AF points are not displayed when the following types of images are played back: •...
Page 874 Movie playback stops by itself. Extended movie playback or movie playback under high ambient temperature may cause the camera’s internal temperature to rise, and movie playback may stop automatically. If this happens, playback is disabled until the camera’s internal temperature decreases, so turn off the power and let the camera cool down a while.
Page 875 Images cannot be resized or cropped. This camera cannot resize JPEG images, RAW images, or frame-grab images from 8K or 4K movies saved as still photos ( This camera cannot crop RAW images, images captured with [HDR shooting in [ : HDR PQ settings] set to [Enable], or frame-grab images from 8K or 4K movies saved as still photos ( Dots of light appear on the image.
Page 876 Computer connection problems I cannot import images to a computer. Install EOS Utility (EOS software) on the computer ( Make sure the main EOS Utility window is displayed. If the camera is already connected via Wi-Fi, it cannot communicate with any computer connected with an interface cable.
Page 877 Error Codes (1) Error number (2) Cause and countermeasures If there is a problem with the camera, an error message will appear. Follow the on-screen instructions. If the problem persists, write down the error code (Errxx) and request service.
Page 878 System Map : Bundled accessories...
Page 879 Speedlite Transmitter ST-E2 Speedlite Transmitter ST-E3-RT Speedlite EL-100 Speedlite 430EX III-RT/430EX III Speedlite 470EX-AI Speedlite 600EX II-RT Macro Ring Lite MR-14EX II Macro Twin Lite MT-26EX-RT Directional Stereo Microphone DM-E1 (10) Stereo Microphone DM-E100 (11) Headphones (12) GPS Receiver GP-E2 (13) Remote Controller RC-6 (14)
Page 880 (42) Card slot (43) Ethernet port (44) Wireless LAN adapter (45) Computer * 1: Battery Pack LP-E6N/LP-E6 can also be used. * 2: AC Adapter Kit ACK-E6 can also be used. * 3: Charging with USB Power Adapter PD-E1 is only available for LP-E6NH/LP-E6N (not LP-E6). * 4: Camera and computer end: USB Type-C.
Page 881 ). The maximum limit is not expanded, even when expansion is set in [Max for Auto]. The minimum speed in the automatic setting range is ISO 400 when [ : Canon Log settings] is set to [On] ( In [ ] mode With ISO speed set to [AUTO], ISO speed is set automatically in a range of ISO 100–...
Page 882 Information Display LCD Panel Still Photo Shooting Screen Movie Recording Screen Scene Icons Playback Screen LCD Panel Still photo/movie standby screen 1 (10) (11) (12) (13) Multi-function lock Shooting mode Battery level WFT battery level Flash exposure compensation Exposure compensation Bluetooth function Wi-Fi function/WFT status (wireless)/WFT status (wired) Shutter speed...
Page 883 Still photo standby screen 2 Drive mode AF method AF operation Card slot Movie recording mode White balance Metering mode Picture Style Movie recording quality...
Page 884 Movie standby screen 2 AF method Image Stabilizer (IS mode) Card slot White balance Canon Log Movie recording time available...
Page 885 Movie recording in progress Elapsed recording time Recording in progress/External recording in progress (10-bit, via HDMI)
Page 886 Still Photo Shooting Screen Each time you press the < > button, the information display will change. The display will show only the settings currently applied.
Page 887 Maximum burst Number of available shots/Sec. until self-timer shoots Focus bracketing/HDR/Multiple exposures/Multi Shot Noise Reduction/Bulb timer/Interval timer Shooting mode AF method AF operation Image quality Card Drive mode (10) Metering mode (11) No. of remaining shots for focus bracketing, multiple exposures, or interval timer (12) Electronic level (13)
Page 888 (24) AEB/FEB (25) View Assist (26) HDR PQ (27) Flash ready/FE lock/High-speed sync (28) Electronic shutter (29) Touch Shutter/Create folder (30) AE lock (31) Shutter speed/Multi-function lock warning (32) Aperture value (33) Wi-Fi function (34) Wi-Fi signal strength (35) Bluetooth function (36) Exposure simulation (37)
Page 889 Movie Recording Screen Each time you press the < > button, the information display will change. The display will show only the settings currently applied. Battery level Movie recording time available/Elapsed recording time Image Stabilizer (IS mode) Shooting mode AF method Movie recording size Audio recording level (manual/line input) Headphone volume...
Page 890 (21) Audio recording level indicator (manual/line input) (22) Movie self-timer (23) AE lock (24) Shutter speed (25) Canon Log (26) Aperture value (27) Wi-Fi function (28) Wi-Fi signal strength (29) Bluetooth function (30) ISO speed (31) Highlight tone priority (32)
Page 891 Scene Icons In [ ] shooting mode or [ ] recording mode, the camera detects the type of scene and sets all settings accordingly. The detected scene type is indicated in the upper left of the screen. Subjects Other Than People People Subject Background...
Page 892 Playback Screen Basic information display for still photos HDR output status/View Assist Bluetooth function Wi-Fi signal strength Wi-Fi function Battery level Current image no./Total images/No. of images found Shutter speed Aperture value Exposure compensation amount (10) Already sent to a computer/smartphone (11) Voice memo (12)
Page 893 Caution If the image was taken by another camera, certain shooting information may not be displayed. It may not be possible to play back images taken with this camera on other cameras.
Page 894 Detailed information display for still photos (10) (11) (12) (13) (14) (15) (16) (17) Aperture value Picture Style/Settings Shutter speed White balance correction/Bracketing Shooting mode/Multiple exposure/Frame Grab White balance Auto Lighting Optimizer Image quality/Edited image/Cropping Exposure compensation amount (10) Shooting date and time (11) Histogram (Brightness/RGB) (12)
Page 895 Detailed information display for movies Movie playback Movie recording mode/High Frame Rate mode Image size Frame rate Compression method Image Stabilizer (IS mode) Recording time/Time code Movie recording format * For simplicity, explanations are omitted for items that are also included in basic/detailed information display for still photos, which are not shown here.
Page 896 EF Lenses Supporting 12 Shots/Sec. Continuous Shooting The following EF lenses support 12 shots/sec. continuous shooting in [ ] drive mode. EF24mm f/2.8 IS USM EF28mm f/2.8 IS USM EF35mm f/1.4L II USM EF35mm f/2 IS USM EF40mm f/2.8 STM EF50mm f/1.8 STM EF85mm f/1.4L IS USM EF200mm f/2.8L II USM...
Page 897 EF-S24mm f/2.8 STM EF-S35mm f/2.8 EF-S10-18mm f/4.5-5.6 IS STM EF-S15-85mm f/3.5-5.6 IS USM EF-S18-55mm f/3.5-5.6 IS STM EF-S18-55mm f/4-5.6 IS STM EF-S18-135mm f/3.5-5.6 IS USM EF-S18-135mm f/3.5-5.6 IS STM EF-S55-250mm f/4-5.6 IS STM...
Page 898 Lens mount: Canon RF mount Compatible lenses: Canon RF lens group * Using mount adapter EF-EOS R: Canon EF or EF-S lenses (excluding EF-M lenses) Lens focal length: Same as the focal length indicated on the lens * Using EF-S lenses: Approx. 1.6 times the indicated focal length...
Page 899 Still photo recording Still photo pixel count Recorded pixels Image quality Aspect ratio [1.6x (crop)] 16:9 Approx. 44.8 Approx. 17.3 Approx. 29.8 Approx. 39.8 Approx. 37.7 megapixels megapixels megapixels megapixels megapixels (8192×5464) (5088×3392) (5456×5456) (7280×5464) (8192×4608) Approx. 22.5 Approx. 15.0 Approx.
Page 900 RAW+HEIF 21.9+13.4 * 1: The number of possible shots and maximum burst (SD card) apply to a 32 GB SD card based on Canon testing standards. * 2: The number of shots available and maximum burst (CFexpress card) apply to a 325 GB CFexpress card conforming to Canon testing standards.
Page 901 Movie recording Movie recording format: MP4, RAW Estimated recording time, movie bit rate, and file size Canon Log: On or HDR PQ: On Movie bit Total recording time (Approx.) File size rate Movie recording size (Approx. (Approx. MB/min.) 64 GB...
Page 902 Canon Log: Off, HDR PQ: Off Movie bit Total recording time (Approx.) File size rate Movie recording size (Approx. (Approx. MB/min.) 64 GB 256 GB 1 TB Mbps) 3 min. 13 min. 51 min. 2600 18668 29.97 fps 25.00 fps...
Page 903 * Sound is not recorded for approx. the last two frames when the compression method for movie recording quality is IPB or IPB Light (audio: AAC) or [ ：Audio compression] is set to [Enable]. Moreover, the video and sound may be slightly out of sync when movies are played back in Windows.
Page 904 Other than above UHS Speed UHS Speed Refer to the Class 3 or higher Class 3 or higher Canon website SD Speed Class UHS Speed ALL-I 3 or higher Class 3 or higher 59.94 fps 50.00 fps SD Speed Class...
Page 905 Built-in and external microphones Built-in microphone: Monaural microphone External microphone terminal: 3.5 mm diameter stereo mini jack Recording media Recording media: CFexpress card SD card * Compatible with UHS-II Viewfinder Type: OLED color electronic viewfinder Screen size: 0.5 inch Dot count: Approx. 5,760,000 dots Magnification / angle of view: Approx.
Page 906 (AI Focus AF) * Set automatically in A+ mode Manual focus Supported Supported Lens compatibility based on AF area: Refer to the Canon website Number of AF zones available for automatic selection AF zone Horizontal: Approx. 100%, Vertical: Approx. 100% Still photos Max.
Page 907 Exposure control Metering functions under various shooting conditions Item Still photo shooting Movie recording Metering sensor 384 zone (24×16) metering using image sensor output signals Evaluative * When faces are detected with [ metering +Tracking] Partial metering Yes: Approx. 6.1% of the screen Metering mode Spot metering Yes: Approx.
Page 908 ：Highlight tone priority], the available ISO speed range is ISO 200 to 25600. * Expanded ISO cannot be set during RAW movie recording. * Cannot be manually set below ISO 400 for RAW movies when Canon Log is specified. * Expanded ISO cannot be set during HDR PQ movie recording.
Page 909 Shutter Still photo shooting Type: Electronically controlled focal-plane shutter Shutter mode Mechanical shutter Electronic 1st curtain Electronic shutter Shutter speed When [Mechanical] or [Elec. 1st- 1/8000–30 sec., Bulb curtain] is set When [Electronic] is set 1/8000–0.5 sec. X-sync speed Mechanical shutter 1/200 sec.
Page 910 In-body Image stabilization (IS mode): Provided External flash Sync contacts: Hot shoe: X-sync contact * Max. flash sync speed: 1/250 sec. with elec. 1st-curtain, 1/200 sec. with mechanical shutter. Drive Drive mode and continuous shooting speed Drive modes Mechanical shutter Electronic 1st curtain Electronic shutter Single shooting...
Page 911 Frame grab from 8K / 4K movies Individual frames in 8K / 4K movies recorded with the camera can be saved as JPEG still photos Approx. 35.4 megapixels (8192×4320) Approx. 33.2 megapixels (7680×4320) Approx. 8.8 megapixels (4096×2160) Approx. 8.3 megapixels (3840×2160) * 1: From HDR PQ movies, saved in HEIF format.
Page 912 Power source Battery Compatible battery packs LP-E6NH/LP-E6N/LP-E6 Quantity used USB battery charging and camera power: Using USB Power Adapter PD-E1 AC power source AC adapter AC-E6N DC coupler DR-E6 Possible shots Battery life (Approx. number of shots) Configuration Shooting method Battery Temperature Power saving...
Page 913 Available operating time Available operating Conditions of use Temperature time Time available for bulb exposure 23°C / 73°F Approx. 4 hr. 40 min. Time available for Live View shooting 23°C / 73°F Approx. 3 hr. 50 min. 23°C / 73°F Approx.
Page 914 Dimensions and weight Dimensions (W)×(H)×(D) Approx. 138.5×97.5×88.0 mm (W)×(H)×(D) Approx. 5.45×3.84×3.46 in. * Based on CIPA guidelines. Weight Body (including battery and memory Approx. 738 g Approx. 26.03 oz. card) Body only Approx. 650 g Approx. 22.93 oz. * Weighed without body cap. Operating environment Operating temperature: 0–40°C / 32–104°F Operating humidity: 85% or less...
Page 915 Wi-Fi Standards compliance Wi-Fi standards Transmission method Maximum link speed IEEE802.11b DS-SS modulation 11 Mbps IEEE802.11g 54 Mbps IEEE802.11n 72.2 Mbps OFDM modulation IEEE802.11a 54 Mbps IEEE802.11ac 86.7/200/433.3 Mbps Transmission frequency (Center frequency) 2.4 GHz band Frequency 2412 to 2462 MHz Channels 1 to 11 ch 5 GHz band...
Page 916 Standards compliance: Bluetooth Specification Version 5.0 compliant Transmission method: GFSK modulation All data above is based on Canon testing standards and CIPA (Camera & Imaging Products Association) testing standards and guidelines. Dimensions and weight listed above are based on CIPA Guidelines (except weight for camera body only).
Page 917 The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Canon Inc. is under license. Other trademarks and trade names are those of their respective owners. All other trademarks are the property of their respective owners.
Page 918 About MPEG-4 Licensing “This product is licensed under AT&T patents for the MPEG-4 standard and may be used for encoding MPEG-4 compliant video and/or decoding MPEG-4 compliant video that was encoded only (1) for a personal and non-commercial purpose or (2) by a video provider licensed under the AT&T patents to provide MPEG-4 compliant video.
Page 919 This product is designed to achieve optimum performance when used with genuine Canon accessories. Therefore, using this product with genuine accessories is highly recommended. Canon shall not be liable for any damage to this product and/or accidents such as malfunction, fire, etc. caused by the failure of non-genuine Canon accessories (e.g., a leakage and/or explosion of a battery).

Canon EOS R5 Advanced User's Manual

Introduction

Preparation and Basic Operations

Shooting Mode

Shooting and Recording

Af/Drive

Quick Links

Troubleshooting

Related Manuals for Canon EOS R5

Summary of Contents for Canon EOS R5

Table of Contents