Using The Rotisserie - Capital PRECISION Outdoor ACG40RBI.1N/L Use And Care Manual

Table of Contents

Advertisement

USING THE ROTISSERIE: Lighting the rotisserie burner:
NOTE: The safety valve on all Precision Series rotisserie sections is included in the main burner valve.
No separate safety button is necessary to operate the rotisserie safety feature.
NEVER USE ROTISSERIE BURNER WHEN GRILLING SURFACE IS USED.
The location of the rotisserie burner makes it more susceptible to strong wind conditions than the protected
grill burners. For this reason you should avoid operating the rotisserie during windy conditions.
As an added safety feature we've equipped the burner with an automatic safety valve that will not allow gas to
flow to the rotisserie burner unless the following conditions are present with the knob on.
The safety valve button is pressed and held down.
The safety valve thermocouple has been sufficiently heated to keep safety valve open.
Open the lid. Push and turn the control valve to HIGH and wait 5 seconds. The igniter will glow brightly to
ignite the burner. Hold the knob pressed in until the rotisserie burner lights. Once lit keep knob pushed in and
held in position for 10 seconds. DO NOT let go of the control knob once burner is lit. The burner will not stay lit
unless it is hot. After 10 seconds, release the knob and set the knob to the desired setting. If the burner does
not light within 4 to 5 seconds,
release the safety valve button and turn the control knob "OFF" and wait 5 minutes before trying again.
If relighting a hot burner, wait 5 minutes.
Never leave the control knob ON if rotisserie is not in use.
Never light the bottom burners while the rotisserie burner is lit.

USING THE ROTISSERIE

Manual Lighting:
To manually light the rotisserie, place a lighter flame near
the tip of the thermocouple as shown in Fig. 13 Turn the
control knob to HIGH.
Hold the safety valve button in for 10 seconds or until the
burner remains lit. Once lit, turn control knob to desired
setting. If the burner does not light within 4 to 5 seconds,
release the safety valve button and turn the control knob
to OFF and wait 5 minutes before
trying again.
23

Advertisement

Table of Contents
loading

Table of Contents