Table of Contents
Advertisement
ELECTRICAL CONNECTION INSTRUCTIONS
ELECTRICAL CONNECTION
Use an approved extension cord, rated for 240 VAC, 10 Amps, to connect power to the transformer box.
Make sure there are no cuts in the insulation to prevent electric shock.
This appliance is equipped with a three-prong Australian Plug for your protection against shock hazard and
should be plugged directly into a properly grounded GPO. Do not cut or remove the grounding prong from the
extension cord.
NOTE: The use of a qualified technican/electrican is recommended for all electric connection.
300mm BETWEEN BOTTOM
AND TRANSFORMER BOX
NOTE: THE TRANSFORMER BOX NEEDS TO
BE ATTACHED TO THE ISLAND WALL.
CAUTION: DO NOT ATTACH TO A HIGH TEMPERATURE AREA
15
Advertisement
Table of Contents
