Check Counting; Application Setup - OHAUS Ranger7000 Instruction Manual

EN-20
4.3.2

Check Counting

Press the configuration button
Under/Accept/Over status is shown in the progress bar area while the actual number of pieces is shown on the
main Display Line.
Note: Refer section 9.5, or press the
Set the Average Piece Weight (APW)
Note: It is recommended that the APW is larger than 1d. If APW
is between 0.05d and 1d, a warning screen will be displayed and
the information line will show 'Low APW'. If APW is less than
0.05d an error screen will appear and the APW value cannot be
stored.
There are three ways to set the APW, see section 4.2.2 for
instructions.
Defining Over/Under Limits
Press the button corresponding to the
Limit Setup.
Note: See section 4.3.1 for information on how to set the
Over/Under limits.
4.3.3

Application Setup

The Application can be customized for various user preferences.
Press the button corresponding to the
Configuration Setup
and select Check Mode to Check Counting. Place objects on the pan. The
button for button icon explanation.
.
The CHECK Home screen
Main Display Line
Reference Fields
Functions
icon to enter
icon to enter
®
RANGER 7000 SCALES