Renesas Y-RH850-X2X-MB-T1-V1 User Manual
  1. Manuals
  2. Brands
  3. Renesas Manuals
  4. Motherboard
  5. Y-RH850-X2X-MB-T1-V1
  6. User manual
Renesas Y-RH850-X2X-MB-T1-V1 User Manual

Renesas Y-RH850-X2X-MB-T1-V1 User Manual

Rh850/x2x main board
Hide thumbs Also See for Y-RH850-X2X-MB-T1-V1:
Table of Contents

Advertisement

Quick Links

Download this manual
RH850 Evaluation Platform
RH850/X2X Main Board
32
Y-RH850-X2X-MB-T1-V1
The newest version of this document can be obtained from the following web location:
Y-RH850-X2X-MB-T1-V1 Documents
All information contained in these materials, including products and product specifications,
represents information on the product at the time of publication and is subject to change by
Renesas Electronics Corp. without notice. Please review the latest information published by
Renesas Electronics Corp. through various means, including the Renesas Electronics Corp.
website (https://www.renesas.com)
www.renesas.com
www.renesas.com
www.renesas.com
User's Manual
Rev.1.02 August 2021

Advertisement

Table of Contents
loading

Related Manuals for Renesas Y-RH850-X2X-MB-T1-V1

Summary of Contents for Renesas Y-RH850-X2X-MB-T1-V1

  • Page 1 All information contained in these materials, including products and product specifications, represents information on the product at the time of publication and is subject to change by Renesas Electronics Corp. without notice. Please review the latest information published by Renesas Electronics Corp. through various means, including the Renesas Electronics Corp.
  • Page 3 General Precautions in the Handling of Microprocessing Unit and Microcontroller Unit Products The following usage notes are applicable to all Microprocessing unit and Microcontroller unit products from Renesas. For detailed usage notes on the products covered by this document, refer to the relevant sections of the document as well as any technical updates that have been issued for the products.

  • Page 4: Table Of Contents

    R20UT4459ED0102 RH850/X2X Main Board Rev.1.02 August 04, 2021 RENESAS MCU Table of Contents Overview ........................7 Package Components ........................... 7 Applicable Piggyback Boards ........................ 8 Main Features ............................8 Extension Boards ..........................8 Main Board Views ..........................9 Jumpers, Switches, Connectors and LEDs ............... 10 Jumpers Overview ..........................
  • Page 5 RH850/X2X Main Board 1. Overview 4.3.5 CANn STB Control ........................35 4.3.6 CAN Interface Connectors ......................35 FlexRay Interfaces ..........................36 4.4.1 Circuit Diagram..........................36 4.4.2 Signal Connections ........................36 4.4.3 Power Supply ..........................36 4.4.4 Control Signals ..........................37 4.4.5 FlexRay Connectors ........................
  • Page 6 RH850/X2X Main Board 1. Overview Precautions ....................... 58 Debugging and Flash Programming Signals ..................58 Differences between Mass Production and Prototype Version of the Main Board ......58 Mechanical Dimensions..................... 59 Schematics ........................ 60 Page 1 ..............................61 Page 2 ..............................62 Page 3 ..............................

  • Page 7: Overview

    The Y-RH850-X2X-MB-T1-V1 product package consists of the following items. After you have unpacked the box, check if your Y-RH850-X2X-MB-T1-V1 package contains all of these items. Table 1.1 Package Components for the Y- RH850-X2X-MB-T1-V1 shows all components in the Y-RH850-X2X-MB-T1-V1 package.

  • Page 8: Applicable Piggyback Boards

    Single 12V board power supply with onboard voltage regulators • Operating temperature from 0°C to +40°C • Extension Boards Renesas offers some extension boards for this main board to provide additional functionality. Table 1.2 Extension board overview Order Code Description Y-RH850-EMMC-SFMA-EXT-BRD...

  • Page 9: Main Board Views

    RH850/X2X Main Board 1. Overview Main Board Views Following figures provide the top and bottom view of the main board. Figure 1.1 Main board top view Figure 1.2 Main board bottom view R20UT4459ED0102 Rev.1.02 Page 9 of 76 August 04, 2021...

  • Page 10: Jumpers, Switches, Connectors And Leds

    RH850/X2X Main Board 2. Jumpers, S 2. Jumpers, Switches, Connectors and LEDs This section provides complete lists of all jumpers, connectors and LEDs. Figure 2.1 Placement of jumpers, switches, connectors and LEDs R20UT4459ED0102 Rev.1.02 Page 10 of 76 August 04, 2021...

  • Page 11: Jumpers Overview

    RH850/X2X Main Board 2. Jumpers, S Jumpers Overview The following table provides an overview of all jumpers. Table 2.1 Jumpers overview (cont'd) Jumper Function Remark LIN1 piggyback board signal connections refer to 4.2 LIN Interfaces LIN0 piggyback board signal connections LIN3 piggyback board signal connections LIN2 piggyback board signal connections CAN0 connector pin 3 control...
  • Page 12 RH850/X2X Main Board 2. Jumpers, S Table 2.1 Jumpers overview (cont'd) Jumper Function Remark JP36 LIN14 piggyback board signal connections refer to 4.2 LIN Interfaces JP37 CAN12 connector pin 3 control refer to 4.3 CAN Interfaces JP38 CAN13 connector pin 3 control JP39 CAN15 connector pin 3 control JP40...
  • Page 13 RH850/X2X Main Board 2. Jumpers, S Table 2.1 Jumpers overview (cont'd) Jumper Function Remark JP83 CAN9 STB of CAN PHY refer to 4.3 CAN Interfaces JP84 CAN8 STB of CAN PHY JP85 CAN11 STB of CAN PHY JP86 CAN10 STB of CAN PHY JP87 CAN9 VIO of CAN PHY JP88...
  • Page 14 RH850/X2X Main Board 2. Jumpers, S Table 2.1 Jumpers overview (cont'd) Jumper Function Remark JP124 A/D measurement VDD_ADC voltage level refer to 4.14 A/D Measurements • JP124[2-1]: VDD_ADC = VDDIOF JP149 FLEX0 PHY power supply refer to 4.4 FlexRay Interfaces JP150 FLEX0 PHY VBAT supply JP151...

  • Page 15: Switches Overview

    RH850/X2X Main Board 2. Jumpers, S Switches Overview The following table provides an overview of all switches. Table 2.2 Switches overview (cont'd) Switch Function Remark Board power supply on/off refer to 3.3 Board Power Switch Signals for LIN0 and LIN1 refer to 4.2 LIN Interfaces Signals for LIN2 and LIN3 SW13...
  • Page 16 RH850/X2X Main Board 2. Jumpers, S Table 2.2 Switches overview (cont'd) SW82 LED-Ring CSI interface refer to 4.12 LED CSI Driver for LED Ring Indicator SW83 RGB encoder/button signal refer to 4.11 RGB Illuminated Rotary Encoder SW84 Touch-Display CSI interface refer to 4.10 Touch Display SW86 Touch-Display I2C interface...

  • Page 17: Connectors Overview

    RH850/X2X Main Board 2. Jumpers, S Connectors Overview The following table provides an overview of all connectors. Table 2.3 Connectors overview (cont'd) Connector Function Remark Piggyback board connectors refer to 4.1 Piggyback Board (Not assembled) reserved for future use +12.0 V external power supply refer to 3.2 Board Power Connection USB-connector to FTDI-converter UART1 GND for external power supply...
  • Page 18 RH850/X2X Main Board 2. Jumpers, S Table 2.3 Connectors overview (cont'd) CN37 LIN16 voltage selection refer to 4.2 LIN Interfaces CN38 LIN19 voltage selection CN39 LIN18 voltage selection CN40 LIN21 voltage selection CN41 CAN0/1 signal connection refer to 4.3 CAN Interfaces CN42 CAN2/3 signal connection CN43...
  • Page 19 RH850/X2X Main Board 2. Jumpers, S Table 2.3 Connectors overview (cont'd) CN77 LIN19 interface connector refer to 4.2 LIN Interfaces CN78 LIN17 interface connector CN79 LIN20 voltage selection CN80 LIN23 voltage selection CN81 LIN22 voltage selection CN82 CAN0 interface connector refer to 4.3 CAN Interfaces CN83 CAN5 interface connector...

  • Page 20: Leds Overview

    RH850/X2X Main Board 2. Jumpers, S LEDs Overview The following table provides an overview of all LEDs. Table 2.4 LEDs overview Function Color Remark LED1 3.3 V power supply VCC3V3 blue refer to 3.6 Voltage Level LEDs LED2 5.0 V power supply VCC5V0 LED3 3.3 V or 5.0 V power supply VDDIOF...

  • Page 21: Power Supply

    RH850/X2X Main Board 3. Power Supp 3. Power Supply Circuit Diagram Figure 3.1 shows the connection of the external power supply and the board protection circuit. Figure 3.2 shows the voltage regulator circuits that generate the necessary voltage levels. VCC12V0_FET 12.0V TP48 VCC_IN...

  • Page 22: Board Power Connection

    RH850/X2X Main Board 3. Power Supp Board Power Connection The Board is operated with a single external 12 V power supply via two banana-type plugs: CN5: red for typ. +12V (allowed range: 9.5V – 15.0V) • CN7: black for GND •...

  • Page 23: Peripheral Circuits

    RH850/X2X Main Board 4. Peripheral 4. Peripheral Circuits The main board includes circuits for output from the processor peripheral modules (e.g. CAN, LIN, FlexRay, Ethernet) or interfaces to external modules (e.g. touch screen, eMMC). All circuits can be controlled by the processor on the piggyback board via connectors CN1-CN3.
  • Page 24 RH850/X2X Main Board 4. Peripheral Table 4.1 Piggyback Board Connector CN1 pin assignment Main board function Main board function ETH0RXD1 EH0TXD1 ETH0RXD2 EH0TXD2 ETH0RXD3 EH0TXD3 ETH0RXCLK ETH0TXCLK ETH0RXER ETH0TXER ETH0CRSDV ETH0TXEN ETH0RXDV ETH0COL ETH0RESET ETH0LINK ‒ ‒ USB0UDMF USB0UDMH USB0UDPF USB0UDPH ‒...
  • Page 25 RH850/X2X Main Board 4. Peripheral Table 4.2 Piggyback Board Connector CN2 pin assignment Main board function Main board function CAN2TX CAN3TX CAN2RX CAN3RX CAN4TX CAN5TX CAN4RX CAN5RX LIN2TX LIN3TX LIN2RX LIN3RX LIN4TX LIN5TX LIN4RX LIN5RX LIN6TX LIN7TX LIN6RX LIN7RX LIN8TX LIN9TX LIN8RX LIN9RX...
  • Page 26 RH850/X2X Main Board 4. Peripheral Table 4.2 Piggyback Board Connector CN2 pin assignment Main board function Main board function SFMA0CLK SFMA0SSL SFMA0IO0 SFMA0IO1 SFMA0IO2 SFMA0IO3 ‒ ‒ MMCA0CLK MMCA0CMD MMCA0DAT0 MMCA0DAT1 MMCA0DAT2 MMCA0DAT3 MMCA0DAT4 MMCA0DAT5 MMCA0DAT6 MMCA0DAT7 ‒ ‒ ETH1MDIO ETH1MDC ETH1RXD0 ETH1TXD0...
  • Page 27 RH850/X2X Main Board 4. Peripheral Table 4.3 Piggyback Board Connector CN3 pin assignment Main board function Main board function CSI0CS0 CSI0CLK CSI0CS1 CSI0SI CSI0CS2 CSI0SO CSI0CS3 ‒ ‒ CSI1CS1 ‒ ‒ PSI5SRX1 PSI5RX1 PSI5STX1 PSI5TX1 PSI5SCLK1 ‒ ‒ ‒ CSI1CS2 CSI1CS3 ‒...
  • Page 28 RH850/X2X Main Board 4. Peripheral Table 4.3 Piggyback Board Connector CN3 pin assignment Main board function Main board function ENC0 ENC1 ‒ ‒ ‒ ‒ ‒ ‒ ‒ ‒ ‒ ‒ ‒ ‒ ‒ ‒ ‒ ‒ ‒ ‒ ‒ ETH0_SO_P ‒...

  • Page 29: Lin Interfaces

    RH850/X2X Main Board 4. Peripheral LIN Interfaces The main board provides 24 LIN interfaces using NXP TJA1021 LIN transceiver. Power supply for each channel can be controlled separately via DIP switches. 4.2.1 Circuit Diagram Below circuit diagram shows the circuitry for LIN0 and LIN1. The other LIN interfaces use a similar circuit. R1IN 2B9<...

  • Page 30: Power Supply Selection

    RH850/X2X Main Board 4. Peripheral 4.2.3 Power Supply Selection Power supply for each LIN channel is controlled by DIP switches. Table 4.4 Power supply switches for LIN channels Switch LIN interface Switch LIN interface Switch LIN interface SW5[1] LIN1 SW20[1] LIN9 SW32[1] LIN17...

  • Page 31: Lin Signals Piggyback Board Connection

    RH850/X2X Main Board 4. Peripheral 4.2.4 LIN Signals Piggyback Board Connection The LIN signals from the microcontroller on the piggyback board can be connected to the LIN circuitry on the main board using the following jumpers: Table 4.7 LIN signals connection jumpers LINn LINn LINn...
  • Page 32 RH850/X2X Main Board 4. Peripheral Table 4.10 LINn interface on 10-pin connectors CNm CN14 for LIN0 (UART0*) CNm (LINn) (see table below) Function in LIN0 Function in UART00 Function mode (JP9[2-3]) mode (JP9[2-1]) − − − − (R1IN*) R1IN T1OUT −...

  • Page 33: Can Interfaces

    RH850/X2X Main Board 4. Peripheral CAN Interfaces The main board provides 16 CAN interfaces using Microchip ATA6561 CAN transceiver. 4.3.1 Circuit Diagram Below circuit diagram shows the circuitry for CAN0 and CAN1. The other CAN channels use a similar circuitry. VCC5V0 CAN0/1 VCC_CAN_0...

  • Page 34: Power Supply

    RH850/X2X Main Board 4. Peripheral 4.3.2 Power Supply With the voltage connection pin headers JPy and JPx the power supply and the VIO supply can be connected to each CANn circuit: Table 4.12 CANn power supply VCC_CAN_n and VIO jumper connection correspondence CANn CANn CANn...

  • Page 35: Cann Stb Control

    RH850/X2X Main Board 4. Peripheral 4.3.5 CANn STB Control The jumper JPx can be used to set the level of each CANn STB input pin: JPx[2-1]:STBn is pulled up to high level. • JPx[2-3]:STBn is pulled down to low level. •...

  • Page 36: Flexray Interfaces

    RH850/X2X Main Board 4. Peripheral FlexRay Interfaces The main board provides 2 FlexRay interfaces using NXP TJA1080ATS FlexRay transceiver. 4.4.1 Circuit Diagram Below circuit diagram shows the circuitry for FLEX0 and FLEX1 VDDIOF VCC5V0_f0 VCC5V0 VCC12V0 VCC12V0_f0 3.3V/OR 5V 5.0V 5.0V 12.0V 12.0V...

  • Page 37: Control Signals

    RH850/X2X Main Board 4. Peripheral Table 4.19 FlexRay power supply jumpers FlexRay0 FlexRay1 VCC/VBUF JP149 VCC/VBUF JP151 VBAT JP150 VBAT JP152 JP110 JP113 4.4.4 Control Signals The FlexRay transceiver status control signals can be controlled with the following jumpers: Table 4.20 FlexRay transceiver status control signal jumpers FlexRay0 FlexRay1 CN95B[1-2]: VDDIOF_FLX_0...

  • Page 38: Flexray Connectors

    RH850/X2X Main Board 4. Peripheral 4.4.5 FlexRay Connectors Connections to the FlexRay interfaces are provided on connectors CN54 and CN61 Table 4.23 FlexRay transceiver signal connectors CN54 FlexRay Signal CN61 FlexRay Signal BM_0 BM_1 BM_1 BP_0 BP_1 BP_1 R20UT4459ED0102 Rev.1.02 Page 38 of 76 August 04, 2021...

  • Page 39: Ethernet Modules

    RH850/X2X Main Board 4. Peripheral Ethernet Modules The main board provides 2 connectors for Ethernet modules. The list of applicable Ethernet modules is shown in Table 4.24 Available Ethernet Modules. Table 4.24 Available Ethernet Modules Module Name Interface Ethernet PHY Connection Tessera TSE-BRPHY004 (Note)
  • Page 40 RH850/X2X Main Board 4. Peripheral The Shimafuji ETHER Board requires some small modifications so it can be used with the RH850/X2X main board. On the Shimafuji ETHER Board following modifications have to be applied: Remove resistor R6. Connect left side of R6 to the upper side of R27. Please refer to the figure below for details of the modification.

  • Page 41: Ethernet Connectors

    RH850/X2X Main Board 4. Peripheral 4.5.3 Ethernet Connectors Table 4.25 Ethernet PHY (MII) connector CN55 pin assignment Function Function ‒ (MCLK_OUT_0*) ETH0RXDV ETH0RXD3 ETH0RXD2 ‒ ‒ ETH0RXD1 ‒ ETH0RXD0 ETH0RXCLK ‒ (MCLK_IN*) ETH0TXEN ‒ ‒ ‒ ETH0TXD3 ‒ ETH0CRSDV ETH0TXD2 ETH0RXDV ETH0COL ETH0TXD1...
  • Page 42 RH850/X2X Main Board 4. Peripheral Table 4.26 Ethernet PHY (MII) connector CN56 pin assignment Function Function ‒ (MCLK_OUT_2*) ETH1RXDV ETH1RXD3 ETH1RXD2 ‒ ETH1RXD1 ETH1RXD0 ETH1RXCLK ‒ (MCLK_OUT_1*) ETH1TXEN ‒ ‒ ‒ ETH1TXD3 ‒ ETH1CRSDV ETH1TXD2 ETH1RXDV ETH1COL ETH1TXD1 ‒ ETH1TXCLK ETH1TXD0 ETH1TXEN ‒...

  • Page 43: Sent (Single Edge Nibble Transmission) Interfaces

    The main board provides the connectors CN15 and CN100 for connecting two SENT interfaces. The SENT extension boards must be ordered from Renesas separately. Please refer to 1.4 Extension Boards for details. The SENT signals from the microcontroller on the piggyback board can be connected to the SENT circuitry on the main...

  • Page 44: Sent Interface Connectors

    RH850/X2X Main Board 4. Peripheral 4.6.2 SENT Interface Connectors Table 4.27 SENT interfaces connectors CN15, CN100 CN15 (SENT0) CN100 (SENT1) Voltage Voltage Bus Power / Programming Power Bus Power / Programming Power − − − − − − − − SENT_RX_0 SENT_RX_1 −...

  • Page 45: Psi5/Psi5S Interfaces

    RH850/X2X Main Board 4. Peripheral PSI5/PSI5S Interfaces The main board provides the connector CN62 for connecting several PSI5/PSI5S compatible sensors. 4.7.1 Circuit Diagram VCC3V3 VCC5V0 VCC12V0 VCC12V0 VCC5V0 VCC3V3 3.3V 5.0V 12.0V 12.0V 5.0V 3.3V PSI5RX0 PSI5RX1 12C3< 12B7< PSI5TX0 PSI5TX1 12C3>...

  • Page 46: Uart Interfaces

    RH850/X2X Main Board 4. Peripheral UART Interfaces The main board provides two UART interfaces. The UART0 and LIN0 interfaces share the CN14 connector. The jumper JP9 selects the CN14 function. UART1 uses an FTDI chip to provide an USB interface on connector CN6. The UART signals from the microcontroller on the piggyback board can be connected to the UART circuitry on the main board using the following jumpers: UART0: JP10...

  • Page 47: Uart Connector

    RH850/X2X Main Board 4. Peripheral 4.8.2 UART Connector UART1 provides 2 connectors. CN6 is the USB connector for the UART1 signals of the FTDI chip, CN94 is the connector for the UART signals to the piggyback board. Table 4.31 UART interface connector CN94 Function Function Reset input...

  • Page 48: Emmc/Sfma Module

    The main board incorporates one connector for an eMMC/SFMA module. The eMMC/SFMA extension board must be ordered from Renesas separately. Please refer to 1.4 Extension Boards for details. Below circuit diagrams shows the pin assignment on the connector for eMMC/SFMA module.
  • Page 49 RH850/X2X Main Board 4. Peripheral VCC3V3 VCC3V3 3.3V 3.3V 100n ERM8-010-05.0-S-DV-L-TR SN74LV1T126DCKR SFMA0IO3 SFMA0IO2 SFMA0CLK SFMA0IO1 SFMA0SSL SFMA0IO0 RESET# RESET MMCA0CMD MMCA0CLK MMCA0DAT<7..0> MMCA0DAT<7..0> 1B4<> 1B2<> SFMA VCC3V3 eMMC VCC3V3_SFMA 3.3V VCC3V3 3.3V 3.3V VCC3V3_eMMC 3.3V VDDI - internal regulator - cap only VDDI\g DNF / DNB VCC3V3...

  • Page 50: Touch Display

    The main board is equipped with the sockets CN57-CN60 to connect to a display module. The connection is designed to be used with Arduino display with capacitive touch by Adafruit (product ID 1947). The TFT display board must be ordered from Renesas separately. Please refer to 1.4 Extension Boards for details. 4.10.1 Circuit Diagram Below circuit diagram shows the connections for the touch screen display.
  • Page 51 RH850/X2X Main Board 4. Peripheral Figure 4.12 Touch display R20UT4459ED0102 Rev.1.02 Page 51 of 76 August 04, 2021...

  • Page 52: Touch Display Connectors

    RH850/X2X Main Board 4. Peripheral 4.10.4 Touch Display Connectors Table 4.36 Touch Display connectors CN57 to CN60 pin assignment CN57 CN58 CN59 CN60 Pin Function Pin Function Pin Function Pin Function − CSI1CS3_s − − − DIGIO_18_s − − − CSI1CS2_s −...

  • Page 53: Rgb Illuminated Rotary Encoder

    RH850/X2X Main Board 4. Peripheral 4.11 RGB Illuminated Rotary Encoder The main board is equipped with a rotary encoder switch IC52 that has an illuminated transparent shaft. The rotary encoder rotation position signals can be connected to the microcontroller on the piggyback board by SW83 or via connector CN103.

  • Page 54: Led Csi Driver For Led Ring Indicator

    RH850/X2X Main Board 4. Peripheral 4.12 LED CSI Driver for LED Ring Indicator The main board provides a LED ring indicator with 16 blue LEDs. The ring indicators 16 LEDs are located around the rotary encoder switch. To drive the 16 LEDs a led driver with CSI interface is used. The CSI interface signals from the microcontroller on the piggyback board can connected to the LED driver circuitry on the main board by switch SW82.

  • Page 55: Interrupt Push Buttons

    RH850/X2X Main Board 4. Peripheral 4.13 Interrupt Push Buttons Two push buttons are available to trigger the interrupts NMI and INT0: • Pushing switch SW52 issues an NMI signal to the piggyback board, if switch SW87[1] is closed • Pushing switch SW53 issues an INT0 signal to the piggyback board, if switch SW87[2] is closed The pin header JP123 can be used to output the signals to some other external hardware.

  • Page 56: A/D Measurements

    RH850/X2X Main Board 4. Peripheral 4.14 A/D Measurements The main board includes 2 potentiometer circuits in order to provide variable voltage levels on the ADC[1:0] signals as inputs to the piggyback board's microcontroller's A/D Converter. R301 generates a signal for ADC[1], if SW88[2] is closed. •...

  • Page 57: Signal Leds

    RH850/X2X Main Board 4. Peripheral 4.15 Signal LEDs Four blue LEDs are provided to allow visual outputs of four signals. The four signal LEDs can be driven by DIGIO[3:0] signals or signals from the pin header CN9 Table 4.42 Signal LEDs SW43 number SW43 closed SW43 open...

  • Page 58: Precautions

    RH850/X2X Main Board 5. Precaution 5. Precautions Debugging and Flash Programming Signals In some devices some of the debugging or flash programming signals like FLMD1 signal are in a pin sharing on the same device pin with some interface signals. When the shared interface is connected to its driver circuitry there may be a disturbance of debugger or flash programmer function.

  • Page 59: Mechanical Dimensions

    RH850/X2X Main Board 6. Mechanical 6. Mechanical Dimensions Figure 6.1 Mechanical dimensions R20UT4459ED0102 Rev.1.02 Page 59 of 76 August 04, 2021...

  • Page 60: Schematics

    RH850/X2X Main Board 7. Schematics 7. Schematics CAUTION The schematics shown in this document are not intended to be used as a reference for mass production. Any usage in an application design is in sole responsibility of the customer. The following components described in the schematics are not provided with the board upon delivery: Oscillators and resonators: OSC1, X3 •...
  • Page 61 RH850/X2X Main Board 7. Schematics Page 1 1SMA5928BT3G_13V R20UT4459ED0102 Rev.1.02 Page 61 of 76 August 04, 2021...
  • Page 62 RH850/X2X Main Board 7. Schematics Page 2 R20UT4459ED0102 Rev.1.02 Page 62 of 76 August 04, 2021...
  • Page 63 RH850/X2X Main Board 7. Schematics Page 3 R20UT4459ED0102 Rev.1.02 Page 63 of 76 August 04, 2021...
  • Page 64 RH850/X2X Main Board 7. Schematics Page 4 R20UT4459ED0102 Rev.1.02 Page 64 of 76 August 04, 2021...
  • Page 65 RH850/X2X Main Board 7. Schematics Page 5 R20UT4459ED0102 Rev.1.02 Page 65 of 76 August 04, 2021...
  • Page 66 RH850/X2X Main Board 7. Schematics Page 6 R20UT4459ED0102 Rev.1.02 Page 66 of 76 August 04, 2021...
  • Page 67 RH850/X2X Main Board 7. Schematics Page 7 R20UT4459ED0102 Rev.1.02 Page 67 of 76 August 04, 2021...
  • Page 68 RH850/X2X Main Board 7. Schematics Page 8 R20UT4459ED0102 Rev.1.02 Page 68 of 76 August 04, 2021...
  • Page 69 RH850/X2X Main Board 7. Schematics Page 9 R20UT4459ED0102 Rev.1.02 Page 69 of 76 August 04, 2021...
  • Page 70 RH850/X2X Main Board 7. Schematics 7.10 Page 10 R20UT4459ED0102 Rev.1.02 Page 70 of 76 August 04, 2021...
  • Page 71 RH850/X2X Main Board 7. Schematics 7.11 Page 11 R20UT4459ED0102 Rev.1.02 Page 71 of 76 August 04, 2021...
  • Page 72 RH850/X2X Main Board 7. Schematics 7.12 Page 12 R20UT4459ED0102 Rev.1.02 Page 72 of 76 August 04, 2021...
  • Page 73 Revision History Description Rev. Date Page Summary V1.00 2019-08-08 ‒ Initial release (Hardware revision D016347_06_V02 ) V1.01 2020-06-10 ‒ Added links for touch displays Added note to Table 4.24 Available Ethernet Modules V1.02 2021-08-04 ‒ Corrected the note for usage of Shimafuji ETHER board in chapter 4.5.2 Use of Ethernet Boards with Main Board...
  • Page 74 Colophon RH850/X2X Main Board T1-V1 User's Manual Publication Date: August 04, 2021 Rev.1.02 Published by: Renesas Electronics Europe...
  • Page 75 Address List...
  • Page 76 Back Cover RH850/X2X Main Board R20UT4459ED0102...

Table of Contents